Phoenix Victron 12/250 Inverter - 120 V - VE.Direct GFCI Duplex Outlet - 200 W Electrical

Phoenix 12/250 Inverter - 120V - VE.Direct GFCI Duplex Outlet - 200W

Inverters allow users to power home equipment - requiring 230V /120 V AC - in "leisure" mode or "automotive" batteries rated at 12 V, 24 V or 48 V DC.

*This inverter has a GFCI duplex outlet.

E.Direct communication port

The VE.Direct port can be connected to:

A computer (connection cable VE.Direct to USB interface required)
Apple and Android smartphones, tablets, MacBooks and other devices
(VE.Direct Bluetooth smart dongle required)

Fully configurable:

Low battery voltage alarm triggering and reset levels
Cut-off and cut-off levels low battery voltage restart
Dynamic cut-off: cut-off level depending on load
li>
Output voltage 210 - 245 V
Frequency 50 Hz or 60 Hz
ECO mode activation/deactivation and ECO mode detection level

Monitoring:

Input and output voltage, % of load and alarms

Proven reliability

The full bridge and toroidal transformer topology has proven its reliability for many years.

The inverters are resistant to short circuits and protected against overheating, whether due to 'overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps, halogen lamps or power tools.

ECO mode

In ECO mode, the inverter goes into standby mode when the load drops below a predefined value (min load: 15W). Once in standby, the inverter will turn on for a short period (adjustable, default:every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a bipolar connector, or between the plus of the battery and the left contact of the bipolar connector.

LED diagnostics

Please consult the manual for a description .

To transfer the load to another AC source: the automatic transfer switch

For Victron's low consumption inverters, they recommend the Filax Switch automatic transfer. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

Cont. Power at 25 degrees C: (1) 250 VA
Cont. Power at 25 degrees C/40 degrees C: 200/ 175W
Peak power: 400W
Output AC voltage/frequency (adjustable): 230VAC or 120VAC +/- 3% 50 Hz or 60 Hz +/- 0. 1%
Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0 V
DC Low Shut Down ( adjustable): 9.3 / 18.6 / 37.2V
Dynamic (depending on load) DC Low Shut Down (fully configurable): Dynamic shutdown, see https://www.victronenergy. com/live/ve.direct:phoenix-inverters-dynamic-cutoff
Restart and alarm DC low (unadjustable): 10.9 / 21.8 / 43.6V
Detection charged battery (adjustable): 14.0 / 28.0 / 56.0V
Max. Efficiency: 87/88/88%
No-load power: 4.2 / 5.2 / 7.9 W
Default zero-load power in ECO mode (range retry default: 2.5 s, adjustable): 0.8 / 1.3 / 2.5W
ECO mode Stop and start power setting: adjustable
Protection (2): a - f
Operating temperature rangent -40 to +65 degrees C (fan assisted cooling)

Case specifications:

Material and color: steel frame and plastic cover (blue Ral 5012)
Battery connection: screw terminals
Maximum cable cross section: 10 mm² / AWG8
Standard AC outlets: 230V: Schuko (CEE 7/4), IEC-320 (male plug included); UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCI
Protection category: IP 21
Weight: 2.4kg / 5.3lbs
Dimensions (H x W x D, mm); (H x W x D, inches): 86 x 165 x 260; 3.4 x 6.5 x 10.2

Accessories:

Remote on/off: Yes
Automatic transfer switch: Filax

Standards:

Safety: EN-IEC 60335- 1 / EN-IEC 62109-1 / UL 458 (3)
EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automobile directiveECE R10-4: 1) Non-linear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

Please contact your dealer for any return, repair, or support issues related to this product.

PRODUCT ID: 103132
SKU: NVN-103132
CSKU: CWR-103132
REWRITE: 114243-victron-phoenix-inverter-12-250-120v
MPN: PIN122510510
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON PHOENIX INVERTER 12/250 120V VE.DIRECT GFCI
NAME_EX:
PTITLE: Victron Phoenix Inverter 12/250 - 120V - VE.Direct GFCIDuplex socket - 200 W
TYPE: Electric | Inverters
SELLER: Victron Energy
HARDWARE> ELECTRICAL AND ELECTRICAL SUPPLIES> POWER INVERTERS

Titre Google:

Gtags:

GSpecs:

Phoenix Victron 12/250 inverter - 120 V - VE.Direct GFCI duplex outlet - 200 W Product description

Phoenix 12/250 inverter - 120 V - VE.Direct GFCI duplex outlet - 200 W

Inverters allow users to power home equipment – requiring 230V/120V AC – using "leisure" or "automotive" batteries rated at 12V, 24V or 48V DC.

*This inverter has a GFCI duplex outlet.

E.Direct communication port

The VE.Direct port can be connected to:

A computer ( VE.Direct .Direct to USB interface cable required)
Smartphones, tablets, MacBooks and other Apple and Android devices
(VE.Direct Bluetooth smart dongle required)

Fully configurable:

Low battery voltage alarm triggering and reset levels
Reset levels low battery voltage shutdown and restartli>
Dynamic cut-off: cut-off level depending on the load
Output voltage 210 - 245 V
Frequency 50 Hz or 60 Hz
ECO on/off mode and ECOlevel mode detection

Monitoring:

Input and output voltage, % of load and alarms

Proven reliability

The full bridge and toroidal transformer topology has proven its reliability for many years.

The inverters are short circuit resistant and protected. against overheating, whether due to overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode

In ECO mode, the inverter goes into standby when the load drops below a predefined value (minimum load: 15W). A fois in standby, the inverter will turn on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote On/Off

A remote on/off switch can be connected to a bipolar connector, or between the battery plus and the left side contact d of the bipolar connector.

LED diagnostics

Please see the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For Victron low consumption inverters, they recommend the transfer switch Filax automatic. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

Cont. Powerat 25 degrees C: (1) 250 VA
Cont. Power at 25 degrees C/40 degrees C: 200 / 175 W
Peak power: 400 W
Output AC voltage/frequency (adjustable): 230VAC or 120VAC +/- 3% 50 Hz or 60 Hz +/- 0.1%
Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0 V
DC Low Shut Down (adjustable): 9.3 / 18.6 / 37.2V
Dynamic (depending on load) DC Low Shut Down (fully configurable): Dynamic cutoff, see https://www.victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
Restart and low DC alarm (adjustable): 10.9 / 21.8 / 43.6V
Charged battery detection (adjustable): 14.0 / 28.0 / 56.0V
Max. Efficiency: 87/88/88%
No-load power: 4.2 / 5.2 / 7.9 W
Default zero-load power in ECO mode (range retry default: 2.5 s, adjustable): 0.8 / 1.3 / 2.5W
ECO mode Stop and start power setting:adjustable
Protection (2): a - f
Operating temperature range -40 to +65 degrees C (fan assisted cooling)

Case specifications:

Material and color: steel frame and plastic cover (Ral 5012 blue)
Battery connection : screw terminals
Maximum cable cross section: 10 mm² / AWG8
Standard AC sockets: 230 V: Schuko (CEE 7/4), IEC-320 (male plug included) ; UK (BS 1363), AU/NZ (AS/NZS 3112); 120V: Nema 5-15R, GFCI
Protection category: IP 21
Weight: 2.4kg / 5.3lbs
Dimensions (H x W x D, mm); (H x W x D, inches): 86 x 165 x 260; 3.4 x 6.5 x 10.2

Accessories:

Remote on/off: Yes
Automatic transfer Switch: Filax

Standards:

Safety: EN-IEC 60335-1 / EN -IEC 62109-1 / UL 458 (3)
EMC: EN 55014-1 / EN 55014-2 /IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
Automotive directive ECE R10-4: 1) Non-linear load, crest factor 3:1; 2) Protection key: a) output short circuit b) overload c) battery voltage too high d) battery voltage too low e) temperature too high f) DC ripple too high

Please contact your dealer for any returns, repairs, or support issues related to this product.

Save $16 when you purchase the Victron Phoenix 12/250 Inverter - 120V - VE.Direct GFCI Duplex Outlet - 200W for only $94 from NVN Marine! Same day dispatch before 3 p.m. Victron Phoenix Inverter 12/250 - 120V - VE.Direct GFCI duplex socket - 200 W Videos Victron Phoenix Inverter 12/250 - 120 V - GFCI duplex socket VE.Direct - 200 W Technical specifications

Type:	Electric \| Inverters
Supplier:	Victron Energy
GFCI:	Yes
User Guide:	Download PDF
Product Manual:	Download PDF
Product Brochure:	Download PDF
Product installation:	Download PDF

Victron Phoenix 12/250 Inverter - 120 V - VE.Direct GFCI Duplex Outlet - 200 W User ReviewsVictron Phoenix 12/250 Inverter - 120 V - VE.Direct GFCI Duplex Outlet - 200W Shipping and Refund

For shipping conditions detailed, please see our shipping policy and you can find our return and refund policy here.