Sale!

Phoenix Victron Inverter 48VDC - 1200VA - 120VAC - VE.Direct - NEMA 5-15R

$89

SKU: Phoenix Victron Inverter 48VDC - 1200VA - 120VAC - VE.Direct - NEMA 5-15R
Category:

Phoenix Victron Inverter 48VDC - 1200VA - 120VAC - VE.Direct - NEMA 5-15R Electrical

Phoenix inverter 48VDC - 1200VA - 120VAC - VE.Direct - NEMA 5-15R

This Phoenix inverter allows you to power domestic equipment requiring 230V/120V AC - using 'Leisure or "automotive" batteries rated at 48 V DC.

VE.Direct communications port

The VE port .Direct can be connected to:

  • A computer (VE.Direct to USB interface cable required)
  • Smartphones, tablets, MacBooks and other devices Apple and Android (VE.Direct Bluetooth Smart Dongle required)

Fully configurable:

  • Power voltage alarm trigger Low battery and reset levels
  • Low battery voltage cutoff and restart levels
  • Dynamic cutoff: cutoff level depending on load
  • Output voltage 210 - 245 V
  • Frequency 50 Hz or 60 Hz
  • Activation/deactivationECO mode and ECO mode detection level

Monitoring:

  • Input and output voltage, % of load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability for many years. The inverters are short circuit resistant and protected against overheating, whether due to overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps, halogen lamps or power tools.

ECO mode

En ECO mode, the inverter goes into standby mode when the load decreases below a predefined value (min load: 15W). Once in standby, the inverter will turn on for a short period (adjustable, default: every 2.5 seconds). If the load exceeds a predefined level, the inverter rwill be turned on.

Remote on/off

A remote on/off switch can be connected to a two-pole connector, or between the plus of the battery and the left contact of the bipolar connector.

LED diagnostics

Please see the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For low power inverters, we recommend the Filax automatic transfer switch. The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

  • Continued. Output power at 25°C: 1200 VA
  • Cont. Output power at 25°C/40°C: 1000 / 850 W
  • Peak power: 2200 W
  • Output AC voltage / Frequency (adjustable): 230 VAC or 120VAC +/- 3% 50 Hz or 60Hz +/- 0.1%
  • Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0V
  • DC Low Shut (adjustable): 9.3 / 18.6 / 37.2V
  • Dynamic (depending on load) DC Low Shut Down (fully configurable): Dynamic cut-off, see https://www. victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
  • Restart and low DC alarm (adjustable): 10.9 / 21.8 / 43.6V
  • Fully charged battery detection (adjustable): 14.0 / 28.0 / 56.0V
  • Maximum efficiency: 91 / 91 / 92%
  • Power at zero load: 7 / 8 / 10W
  • Default no-load power in ECO mode (default retry interval: 2.5s, adjustable): 1/1.5/3.0W
  • Stop and start power setting in ECO mode: adjustable
  • Protection: a – f
  • Operating temperature range: -40 to +65°C ( fan assisted cooling) 1.25% derating per °C above40°C
  • Humidity (non-condensing): max. 95%

Enclosure specifications:

  • Material and color: steel chassis and plastic cover (blue Ral 5012)
  • Battery connection: screw terminals
  • Maximum cable size: 35 / 25 / 25 mm2 / AWG2 / 4 / 4
  • Standard AC plug: 230 V: Schuko (CEE 7/4), IEC-320 (plug included) UK (BS 1363), AU/NZ (AS/NZS 3112) / 120 V: Nema 5-15R, GFCI Protection category: IP 21
  • Weight: 7.4kg / 16.3lbs
  • Dimensions (h x w x d): 117 x 232 x 327 mm / (4.6 x 9.1 x 12.9 inches)

Accessories:

  • Remote On/Off: Yes
  • Switch automatic transfer: Filax

Standards:

  • Safety: EN-IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)
  • EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
  • Automotive directive: ECE R10-4
Please contact your dealer for any returns, repairs, or support issues related to this product.


PRODUCT ID: 100965
SKU: NVN-100965
CSKU : CWR-100965
REWRITE: 112076-victron-phoenix-inverter-48vdc-1200va
MPN: PIN482122500
UPC: 8719076054238
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON PHOENIX 48VDC 1200VA 120V VE.DIRECT INVERTER
NAME_EX:
PTITLE: Victron Phoenix 48VDC inverter - 1200VA - 120VAC - VE.Direct - NEMA 5-15R PRODUCT TYPE: Electrical | Inverters
SELLER: Victron Energy
HARDWARE> POWER AND ELECTRICAL SUPPLIES> POWER INVERTERS



Gtags:

GSpecs:

Phoenix Victron inverter 48VDC - 1200VA - 120VAC - VE.Direct - NEMA 5-15R Product description

Phoenix inverter 48VDC - 1200VA - 120VAC - VE.Direct - NEMA 5-15R

This Phoenix inverter allows you to power domestic equipment requiring 230 V/120 V AC - using "leisure" or "automotive" batteries rated at 48 V DC.

Port VE.Direct communication port

The VE.Direct port can be connected to:

  • A computer (interface cable VE.Direct to USB required)
  • Smartphones, tablets, MacBooks and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)

Fully configurable :

  • Low Battery Voltage Alarm Trip and Reset Levels
  • Low Battery Voltage Cutoff and Reset Levels
  • Dynamic cut-off: cut-off level depending on the load
  • Voltage de output 210 - 245 V
  • Frequency 50 Hz or 60 Hz
  • ECO mode activation/deactivation and ECO mode detection level

Monitoring:

  • Input and output voltage, % of load and alarms

Proven reliability

The complete system The bridge plus toroidal transformer topology has proven its reliability for many years. The inverters are short circuit resistant and protected against overheating, whether due to overload or high ambient temperature.

High starting power

Needed to start loads such as power converters for LED lamps, halogen lamps or power tools.

ECO mode

En ECO mode, the inverter goes into standby mode when the load decreases below a predefined value (min load: 15W). Once in standby, the inverter will turn on for a short period (settingable, default: every 2.5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off

A remote on/off switch can be connected to a bipolar connector, or between the battery plus and the left contact of the bipolar connector.

LED Diagnostic

Please see the manual for a description.

To transfer the load to another AC source: the automatic transfer switch

For low power inverters, we recommend the Filax automatic transfer switch . The Filax features a very short switching time (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption.

Inverter specifications:

  • Continued. Output power at 25°C: 1200 VA
  • Cont. Output power at 25°C/40°C: 1000 / 850 W
  • Peak power: 2200 W
  • Output AC voltage / Frequency (adjustable): 230 VAC or 120VAC +/- 3% 50 Hz or 60Hz +/- 0.1%
  • Input voltage range: 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0V
  • DC Low Off ( adjustable): 9.3 / 18.6 / 37.2V
  • Dynamic (depending on load) DC Low Shut Down (fully configurable): Dynamic shutdown, see https://www. victronenergy.com/live/ve.direct:phoenix-inverters-dynamic-cutoff
  • DC lowRestart and alarm (adjustable): 10.9 / 21.8 / 43.6V
  • Fully charged battery detection (adjustable): 14.0 / 28.0 / 56.0V
  • Maximum efficiency: 91 / 91 / 92%
  • No-load power: 7 / 8 / 10W
  • Default no-load power in ECO mode (default retry interval: 2.5s, adjustable): 1 / 1.5 / 3.0W
  • ECO mode Stop and start power setting: adjustable
  • Protection: a – f
  • Operating temperature range: -40 to+65°C (fan assisted cooling) 1.25% derating per °C above 40°C
  • Humidity (non-condensing): Max 95%

Enclosure specifications:

  • Material and color: Steel chassis and plastic cover (Ral 5012 blue)
  • Connection of the battery: Screw Terminals
  • Maximum cable section: 35 / 25 / 25 mm2 / AWG2 / 4 / 4
  • Standard AC sockets: 230 V: Schuko (CEE 7/4), IEC-320 (plug included) UK (BS 1363), AU/NZ (AS/NZS 3112) / 120V: Nema 5-15R, GFCI
  • Protection category: IP 21
  • Weight: 7.4kg / 16.3lbs
  • Dimensions (h x w x d): 117 x 232 x 327 mm / (4.6 x 9.1 x 12.9 inches)

Accessories:

  • On-Off Remote Control: Yes
  • Automatic Transfer Switch: Filax

Standards:

  • Safety: EN -IEC 60335-1 / EN-IEC 62109-1 / UL 458 (3)
  • EMC: EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-2 / IEC 61000-6-3
  • Automotive directive: ECE R10-4
Please contact your dealer for any returns, repair or support issue related to this product.



Save $58 on the purchase of the Victron Phoenix Inverter 48VDC - 1200 VA - 120VAC - VE.Direct - NEMA 5-15Rfor only $334 from NVN Marine! Free same day delivery before 3 p.m. Victron Phoenix 48VDC Inverter - 1200VA - 120VAC - VE.Direct - NEMA 5-15R Technical Specifications
Type:

Electric | Inverters

Supplier:

Victron Energy

Weight:

18.85 lbs

User Guide:

Download PDF

Product Manual:

Download PDF

Victron Phoenix 48VDC inverter - 1200VA - 120VAC - VE.Direct - NEMA 5-15R Avis usersVictron Phoenix 48VDC Inverter - 1200VA - 120VAC - VE.Direct - NEMA 5-15R Shipping and Returns
Shipping Weight:

18 .85 lb

Box sizes:

8.00 (h) x 12.00 (w) x 16 .00 (l)

Cubic feet:

1536.0

For detailed shipping terms, please see our Shipping Policy and you can find our return and refund policy here.