ProMariner ProSafe FAILSAFE 30 Amp Galvanic Isolator Electrical

FailSafe technology with reliability and peace of mind. The ProSafe FS series of 30 and 60 amp FailSafe galvanic isolators will interrupt the flow of galvanic current to other boats in a marina when installed on a boat connected to shore power. This technology maintains AC safety and addresses the most common forms of corrosion and premature zinc loss within the boat bonding system. The ProSafe FS Series is UL certified to meet the parameters of ABYC Recommendation A-28. ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required for non-FailSafe certified galvanic isolators. The ProSafe 30 and 60 A models are built on robust Flat Pack semiconductor platforms, ensuring that in the event of a failure, the failure is safe by not compromising the continuity of terre on board when connected to AC shore power.

Pro Mariner 22034 Attributes Pro Mariner 22034 Features and Benefits

High power semiconductors in flat pack: robust, high-power diodes allow the FS series to meet the new FailSafe criteria
Innovative design: the FS60 will automatically cool if it needs to carry power Cooler operation in this mode
Protected Ignition: Meets ISO 8846 and each model can be mounted in an engine compartment
Gold Plated Terminations: Simply install into the built-in green safety ground wire
Use the ProSafe FS30 for 30 amp shore cord applications
5 year limited warranty

Pro Mariner 22034 Installation Instructions

22034_USE_FailSafe.pdf
22034_USE.pdf

Pro Mariner Technical Bulletins 22034

22043_SS.pdf

ProSafe FAILSAFE 30 A galvanic isolator

ProSafe FS installs easily and does not require a dedicated monitor to check the operational status of the galvanic isolator as required FailSafe.ors non-certified galvanic isolator.

ProSafe FS 30 is built on rugged FlatPack semiconductor platforms ensuring that in the event of a failure, the failure is safe in not compromising earth continuity on board when connected to the mains. Shore power.
ABYC A-July 28, 2008 Fail-Safe Compliant and Certified
Certified by Underwriters Laboratories (UL). Ensures the shore power safety ground wire is held through the insulator.
High-power flat-pack semiconductors
Robust high-power diodes enable the FS series to meet new FailSafe criteria for conducting high voltage currents inrush of 3000 amps duringrequired duration period.
Protected against ignition
Complies with ISO 8846 and can be mounted in an engine compartment.
Gold plated terminations

This product can expose you to chemicals, including di(2-ethylhexyl phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca. gov.

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Pro Safe. FS 30 is built on the powerful Flat Pack semiconductor platform This can ensure that ground continuity will not be compromised in the event of a fault, thus ensuring safety.
PRODUCT ID: 33330
SKU: NVN-33330
CSKU: CWR-33330
REWRITE:44441-promariner-prosafe-failsafe-30amp-galvanic-isolator
MPN: 22034
UPC: 031669220348
ASIN: B001C417OG
WSKU:
SSKU: PRO-22034
KSKU: P4V22034
GSKU:
MSKU:
LSKU: 175-22034
NAME: ProMariner ProSafe FAILSAFE 30 A Galvanic Isolator
EX_NAME: PROMARINER PROSAFE FAILSAFE GALVANIC ISOLATOR 30 A
PTITLE: ProMariner ProSafe Isolator galvanic FAILSAFE 30 A
TYPE: Electric | Battery Isolators
SELLER: ProMariner
VEHICLES & PARTS> VEHICLEPARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Wireless
ProMariner 22034 ProSafe 30A Galvanic Isolator
br> Promariner Prosafe Failsafe 30A Galvanic Isolator by Hodges Marine
Wireless
Gtags:

GSpecs:

ProMariner ProSafe FAILSAFE 30 Amp Galvanic Isolator Product Description

FailSafe technology with reliability and peace of mind. The ProSafe FS series of 30 and 60 amp FailSafe galvanic isolators will interrupt the flow of galvanic current to other boats in a marina when installed on a boat connected to shore power. This technology maintains AC safety and addresses the most common forms of corrosion and premature zinc loss within the boat bonding system. The ProSafe FS Series is UL certified to meet the parameters of ABYC Recommendation A-28. ProSafe FS installs easily and does not require a dedicated monitor to verify the operational status of the galvanic isolator as required for non-FailSafe certified galvanic isolators. The ProSafe 30 and 60 A models are built on robust Flat Pack semiconductor platforms, ensuring thatIn the event of a fault, the fault is safe by not compromising onboard earth continuity when connected to AC shore power.

Pro Mariner 22034 Attributes Pro Mariner 22034 Features and Benefits

High-power flat-pack semiconductors: Robust high-power diodes enable the FS Series to meet new FailSafe criteria
Innovative design: the FS60 will automatically cool if it is required to perform current-assuring cooling operation in this mode
Ignition protected: complies with ISO 8846 and either other model can be mounted in an engine compartment
li>
Gold plated terminations: simply install into the built-in green safety ground wire
Use the ProSafe FS30 for applications of 30 amp shore cord
5-year limited warranty

Pro Mariner 22034 Installation Instructions

22034_USE_FailSafe.pdf
22034_USE.pdf

Pro Mariner 22034 Technical Bulletins

22043_SS. pdf

ProSafe FAILSAFE 30 Amp Galvanic Isolator

ProSafe FS installs easily and does not require a dedicated monitor to check the status of the operation of the galvanic isolator as required by non-FailSafe certified galvanic isolators.

ProSafe FS 30 is built on robust FlatPack semiconductor platforms ensuring that in the event of a failure , the fault is safe by not compromising the onboard ground continuity when connected to AC shore power.
ABYC A-July 28, 2008 Fail-Safe Compliant and Certified
Certified by Underwriters Laboratories (UL). Ensures the shore power safety ground wire is held through the insulator.
High power flat pack semiconductors
High power diodes rObustances allow the FS Series to meet the new FailSafe criteria to conduct inrush currents of 3,000 amps for the required period.
Protected against ignition
Complies with ISO 8846 and can be mounted in an engine compartment.
Gold plated terminations

This product can expose you to chemicals, including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

This product cannot be returned to the original point of purchase. Please contact the manufacturer directly if you have any problems or concerns.

Pro Safe FS 30 is built on the powerful Flat Pack semiconductor platform. This can ensure that the continuity of the floor will not be compromisedin the event of a breakdown, thus guaranteeing safety.

ProMariner ProSafe FAILSAFE 30amp Galvanic Isolator Related ProductsSeaguard Marine Standard Digital Corrosion Tester with Zinc Reference Cell (ZRE)
Seaguard Marine Professional Digital Corrosion Tester with Silver and Silver Reference Cell silver chloride (SSC)

Frequently asked questions (FAQ) about the ProMariner ProSafe FAILSAFE 30 A galvanic isolator Who is the ProMariner?
How to describe the ProMariner ProSafe FAILSAFE 30 A galvanic isolator?
What is the weight of the product?
What is the size?
Who is the ProMariner? Professional Mariner was founded over 40 years ago with one principle: to make boating more enjoyable! We pioneered a robust line of fully automatic onboard marine battery chargers that have provided the maritime industry with a common method of charging.t batteries in a short time without the need to store or carry portable battery chargers on board. We haven't looked back since.

Today, ProMariner is the industry leader in marine and mobile battery charging. We offer a full range of waterproof and dry-mount chargers for all battery chemistries, as well as technically advanced power conversion modules. All of our products are designed to extend the life of your batteries and keep you on the water longer! How to describe the ProMariner ProSafe FAILSAFE 30 Amp Galvanic Isolator? Pro Safe FS 30 is built on the powerful Flat Pack semiconductor platform. This can ensure that the continuity of the ground will not be compromised in the event of a breakdown, thus ensuring safety. What is the weight of the product? 3What is the size? 6.75" L x 7" W x 2.5" H

Save$216 when you purchase the ProMariner ProSafe FAILSAFE 30 Amp Galvanic Isolator for just $230 from NVN Marine! Same day dispatch before 3 p.m. ProMariner ProSafe FAILSAFE 30 Amp Galvanic Isolator Technical Specifications

Type:	Battery Electric \| Insulators
Supplier:	ProMariner
Weight:	3.5 lbs
Product Manual:	Download PDF

ProMariner ProSafe FAILSAFE 30amp Galvanic Isolator User ReviewsProMariner ProSafe FAILSAFE 30amp Galvanic Isolator Shipping & Return

Shipping weight:	3.5 lbs
Box sizes:	3.00 (h) x 8.00 (w) x 13.00 (w)
Cubic feet:	312.0
P65:	Yes