PSS PRO shaft seal 1-1/2" shaft and 2-1/4" tube Marine Hardware

PRO shaft seal for 1-1/2" shaft and 2-1/4" tube

The PSS PRO shaft seal is a seal mechanical using our proven stainless steel. and carbon sealing components, but adds a reinforced silicone bellows, we include external rings standard on +2-1/4" sizes and optional on all smaller sizes, a shaft retention collar secondary, 316 stainless steel hose clamps (rolled edges and non-perforated) and an optional Nitronic 50 rotor upgrade (for highly corrosive environments Designed specifically for applications that will require increased durability and strength). to harsh, corrosive, high pressure and otherwise demanding environments The PSS PRO shaft seal is a specialized mechanical seal that is suitable for a variety of applications, with unrivaled performance.

Like seals. PSS type A and B, PRO shaft seal is a sealmechanical facial. The sealing surface is created between the flat surfaces of the rotating part. stainless steel rotor and the carbon fixed flange T. The carbon fixed flange is attached to a heavy duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the shaft diameter, which allows it to "float" around the shaft and thus compensate for most misalignments and vibrations in the transmission. The roThe stainless steel tor is sealed to the shaft by two O-rings recessed into the rotor bore. These O-rings rotate with the stainless steel shaft and rotor and therefore do not suffer wear during operation.

Specifications:

Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" Tolerance)
316SS / Nitronic 50: Face to 9 Ra
Bellows Material: Molded Formed Silicone/Fabric

Product Dimensions:

Shank Dia. (A) 1-1/2"
Stern tube diameter. (B) 2-1/4" to 2-3/8"
Uncompressed length ( C) 8.968"
Approx compressed length 7.968"
Rotor diameter (D) 3.75"
Rear cuff length (E) 1.3 "

PYI PSS PRO shaft seal adopts components from janointed mature stainless steel and carbon, but adds reinforced silicone bellows, auxiliary shaft retaining ring, 316SS pipe...shaft-1-1-2-shaft seal
MPN: 03 -112-214
UPC: 015568069840
ASIN: B09BBHDBP8
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME : PSS PRO Shaft Seal 1-1/2" Shaft & Tube 2-1/4"
NAME_EX: PSS PRO SHAFT SEAL 1 1/2" SHAFT AND 2 1/4" TUBE
PTITRE: Seal PSS PRO Shaft Kit 1-1/2" and 2-1" Shaft/4" Tube
TYPE: Marine Hardware | Shaft Seals
SELLER: PSS Shaft Seal
SPORTING GOODS> OUTDOOR RECREATION> BOATING & WATER SPORTS PSS Pro Shaft Seal 1- 1/2" Shaft and 2-1/4" Tube

Gtags:

GSpecs:

PSS PRO Shaft Seal for 1-1/2" Shaft and 2-1/4" Tube Product Description

PRO Shaft Seal for 1-1/2" Shaft and 2-1/4" Tube 2-1/4"

The PSS PRO shaft seal is a mechanical seal using our proven stainless steel and carbon sealing components, but adds a reinforced silicone bellows, we include standard outer rings on +2-1/4" sizes and optional on all smaller sizes, secondary shaft retention collar, 316 stainless steel hose clamps (rolled edges and non-perforated) and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure and otherwise demanding environments. PSS PRO shaft seal is a specialist mechanical seal that is suitable for a variety of applications, withunmatched performance.

As with Type A and B PSS seals, the PRO Shaft Seal is a mechanical seal. The sealing surface is created between the two flat surfaces of the rotating stainless steel rotor and the fixed carbon flange. The fixed carbon bridle is attached to a heavy duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the shaft diameter, allowing it to "float" aroundthe shaft and thus compensate for most misalignments and vibrations in the transmission. The stainless steel rotor is sealed to the shaft by two O-rings recessed into the rotor bore. These O-rings rotate with the stainless steel shaft and rotor, and therefore do not suffer wear during operation.

Specifications:

Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft speed limits: 10,000 rpm
Carbon Graphite: lapped to 4 HLB (0.000044" tolerance)
316SS / Nitronic 50: face 9 Ra
Bellows Material: Molded Formed Silicone/Fabric

Product Dimensions:

Shaft Diameter (A) 1-1/2"
Stern tube diameter. (B) 2-1/4" to 2-3/8"
Uncompressed length (C) 8.968"
Approx. compressed length 7.968"
Rotor Diameter (D) 3.75"
LoRear cuff length (E) 1.3"

PYI PSS PRO shaft seal adopts mature stainless steel and carbon seal components, but adds bellows reinforced silicone, an auxiliary shaft retaining ring, a 316SS hose...

Frequently asked questions (FAQ) about the PSS PRO shaft seal 1-1/2" and 2- 1/4"; Tube Who is PSS shaft seal?
How to describe PSS PRO shaft seal for 1-1/2" shaft and 2-1/4" tube?
Who is the PSS shaft seal? The PSS shaft seal is the best-selling marine mechanical seal in the world and is installed as standard equipment by many shipyards and boat builders. most renowned in the world The PSS shaft seal is also recognized as the leading retrofit (aftermarket) seal on the world market How to describe the PSS PRO shaft seal for 1- shaft. 1/2" and 2-1/4" tube? PYI PSS PRO shaft seal adopts matte seal components.ures in stainless steel and carbon, but adds reinforced silicone bellows, auxiliary shaft retaining bushing, 316SS hose...

Save $128 at procurement. the PSS PRO Shaft Seal for 1-1/2" Shaft and 2-1/4" Tube for only $513 from NVN Marine! Same day dispatch before 3 p.m. PSS PRO Shaft Seal 1-1/2" Shaft and 2-1/4" Tube Videos PSS PRO Shaft Seal 1-1/2" Shaft and 2-1/4" Tube Technical Specifications for Tube 2-1 /4"

Type:	Marine Hardware \| Shaft Seals
Supplier:	PSS shaft seal
Weight:	6 .25 lb

PSS PRO Shaft Seal, 1-1/2" Shaft and 2-1/4" Tube User ReviewsJoint PSS PRO 1-1 /2" Shaft and 2-1/4" Tube Shipping & Returns

Shipping Weight:	6.25 lbs
Box sizes:	6.00 (h) x 7.00 (w) x 11.00 (w)
Cubic feet:	462.0
Returnable:	Yes