R&D motor mount with 4" footprint - 12mm stud - 30 to 90 lb capacity per mount Marine Hardware

Engine mount with 4" footprint - 12mm stud - 30 to 90 lb capacity per mount

R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb propeller thrust fore and aft, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts , all Steel parts are zinc plated and pasivated to limit corrosion. The component is covered with an oil shield to protect it from petroleum-based products.

R & D Marine supports are preloaded depending on the product. combined weight of the engine and transmission to limit engine movement for ease of installation. The brackets are height adjustable and the mounting holes in the base of the bracket are slotted to facilitate transmission alignment.

How to select (req detailsuis):
1.Define the total weight of the engine and transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear supports (the side supports engine transmission).
3. Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the transmission side of the engine).
4. Determine the required stud diameter and bracket footprint.
5. Choose the most appropriate size bracket for the weight of each bracket. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177 lbs by rear support. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. The required supportss are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accept thrust from the propeller and motor in both directions
Offers a fail-safe design
R&D marine mounts are high quality and adjustable
Preloaded to reduce movement
Slotted holes in base for easy alignment
Mounting types to suit all applications

The fixed frame is strong enough to absorb the thrust of the propeller forward and backward, but flexible enough to isolate vibrations from the hull transmission system. To help increase the lifespan of
PRODUCT ID: 54879
SKU: NVN-54879
CSKU: CWR-54879
REWRITE: 65990-r-d-engine-mount-w-4-footprint
MPN: 800-038
UPC: 839662003667
ASIN: B00R9UAN10
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: R&D motor mount with 4" footprint - 12mm stud - 30-90 lbs capacity per bracket
NAME_EX: R&D motor mount with 4" footprint, 12mm stud, 30-90 lbs
PTITLE: R & D motor mount with 4" footprint - 12mm stud - Capacity of 30 to 90 lbs per mount
TYPE: Marine Hardware | Engine Mounts
SELLER: R&D Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> ENGINE PARTS POWERWATER R&D Engine Support with 4" recess, 12mm stud, 30-90 Lbs - 800-038

Gtags:

GSpecs:

R&D Motor Mount with 4" Footprint - 12mm Stud - 30 to 90 lb. Capacity per Bracket Product Description Motor Mount with 4" Footprint - 12mm Stud - 30 to 90 lb. Capacity per Bracket /b>

R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes ins base of the bracket are slotted for easy alignment of the transmission.

How to select (details required):
1.Define the total weight of the engine and the transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the transmission side of the engine).
br>3.Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front brackets (the brackets opposite the transmission side of the engine).
4.Determine the necessary stud diameter and bracket footprint.
5. Choose the most appropriate size bracket for the weight per bracket. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177lbs per rear support. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. Required brackets are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts propellers and engine thrust in both directions
Offers a fail-safe design
R&D marine mounts are height adjustable
Pre - loaded to reduce movement
Oblong holes in base for easy alignment
Mounting types to suit all applications

The fixed frame is strong enough to absorb the thrust of the propeller forward and backward, but flexible enough to isolate vibrations from the transmission system of the hull. To help increase the life of

Frequently Asked Questions (FAQ) about R&D Motor Mount with 4" Footprint - 12mm Stud - 30 Capacityat 90 lbs per bracket Who is R&D Marine?
How to describe the R&D engine mount with 4" footprint - 12 mm stud - 30 to 90 lb capacity per bracket?
Who is R&D Marine ?It has always been considered essential that all products are easy to use, safe and above all available at the right price. R & D Marine is proud to be able to supply or assemble most products in stock to cover urgent breakdowns. service provided, product suitability and customer recommendations, it was possible to develop the global distribution network that R & D Marine has today How to describe the R & D engine mount with 4" footprint -. 12mm Stud - 30-90 lb capacity per bracket? The fixed frame is strong enough to absorb the thrust of the propeller forward and aft, but flexible enough to isolate vibrations from the hull drive system. To help increase the duration oflife of the

Save $25 when you purchase the R&D Motor Mount with 4" Footprint - 12mm Stud - 30 to 90 lb Capacity per Bracket

/b> for only $100 from NVN Marine! Same day shipping before 3pm R&D Engine Mount with 4" Footprint - 12mm Stud - 30-90lb Capacity per Bracket Technical Specifications table> Type:

Marine equipment | Engine Mounts

Supplier:

Marine R&D

Weight:

1.45 lbs

User Guide:

Download PDF

Product brochure:

Download PDF

R&D Motor Mount with 4" Footprint - 12mm Stud - 30-90 lb. Capacity per Bracket User ReviewsR&D Motor Mount with 4" Footprint - 12mm Stud - Capacity of 30 to 90 lbs per support Shipping and return

Shipping Weight:	1.45 lbs
Box Sizes:	4.00 (h) x 6.00 (w) x 8.00 (w)
Cubic feet :	192.0
Returnable:	Yes