RAM Mount Locking Case for Garmin dezl760LMT nuvi 2797LMT and RV 760LMT Ram Mount Store
Lock housing for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT
The RAM-HOL-GA61LU consists of a high-strength composite lock housing and of a hole pattern that will allow attachment to any RAM components or sockets containing the universal AMP hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this lock housing is ready to complement your GPS and become your vehicle's most useful accessory.
Included is a set of two nuts and bolts to connect the support any RAM components or brackets containing the universal AMP hole pattern.
Lock Case Features:
1. Open access to all electronic ports including audio port, speaker/mic and mini USB
2. Custom Factory Dock Pocket
3. Rugged construction deters theft and protects vulnerable areas of the apsame
4. Attaches to all 4 corners with supplied hardware
5. Will not obstruct GPS signal
6. Secure USB power connection with wi-fi retention
7. Lifetime warranty
8. Made in the USA.
Specifications:
- Material: High Strength Composite
- Note: *The RAM- HOL- The GA61LU was designed before the release of the BC20 Wireless Backup Station. Current design does not allow this dock module to be integrated into the cradle.
- The "U" in the part number reflects the product packaged in a poly bag.
- Weight: 0.45 lbs.
Special Information:Designed for use with third-party EOBR equipment and to record hours of service in accordance with the CSA (compliance , safety, responsibility). To learn more, visit the Federal Motor Carrier Safety Administration (FMCSA) website.
For more information aboutGarmin commercial solutions and mobile resource management (MRM) solutions based on PND, visit the Garmin website.
The car mounting frame is composed of high-strength composite lock housing and hole pattern, which can be attached to all RAM components or bases containing common parts.
PRODUCT ID: 71983
SKU: NVN-71983
CSKU: CWR-71983
REWRITE: 83094-ram-mount-locking-case-f-garmin-dezl-760lmt-nuvi
MPN: RAM-HOL-GA61LU
UPC: 793442942051
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: RAM Mount Locking Case for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT
NOM_EX: RAM Mount Locking Case F/ GARMIN DEZL 760LMT, RV760LMT
PTITLE: RAM Mount Locking Case for Garmin dezl ™ 760LMT, nuvi 2797LMT and RV 760LMT
TYPE: Ram Mount Store | GPS Mounts
SELLER: RAM Mounting Systems
ELECTRONICS> GPS ACCESSORIES> GPS MOUNTS Ram Form-Fit Lock Cradle for Garmin dezl 760LMT and More
Gtags:
| RAM mounts | |
| Automotive |
GSpecs:
RAM Mount Locking Case for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT Product Description
Locking Case for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT
The RAM-HOL-GA61LU consists of a high strength composite locking housing and hole pattern that will allow attachment to any RAM components or carriers containing the AMP universal hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this lock housing is ready to complement your GPS and become your vehicle's most useful accessory.
Included is a set of two nuts and bolts to connect the support any RAM components or brackets containing the universal AMP hole pattern.
Lock Case Features:
1. Open access to all electronic ports including audio port, speaker/mic and mini USB
2. Personalized pocket forfactory dock
3. Robust construction deters theft and protects vulnerable areas of the device
4. Secures at 4 corners with hardware provided
5. Will not obstruct GPS signal
6. Secure USB power connection with wire retention
7. Lifetime warranty
8. Made in the USA.
Specifications:
- Material: High Strength Composite
- Note: *The RAM- HOL- The GA61LU was designed before the release of the BC20 Wireless Backup Station. Current design does not allow this dock module to be integrated into the cradle.
- The "U" in the part number reflects the product packaged in a poly bag.
- Weight: 0.45 lbs.
Special Information:Designed for use with third-party EOBR equipment and to record hours of service in accordance with the CSA (compliance , safety, responsibility). To find out more, visit the websiteFederal Motor Carrier Safety Administration (FMCSA).
For more information about Garmin commercial solutions and PND-based mobile resource management (MRM) solutions, visit the Garmin website.
The car fixing frame is made of a high-strength composite locking casing and hole pattern, which can be attached to any RAM components or bases containing common rooms.
RAM Mount Locking Housing for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT Related ProductsRAM Mount Base Screw-On Mount - Requires RAM Mount
RAM Mount Base Suction Cup Mount Twist Lock - Requires RAM Cradle
RAM Mount Base UBolt Mount - Requires RAM Cradle
RAM Mount Rail ATV UTV Bracket with Diamond
RAM Mount Fork Stem Motorcycle Base with Double Socket diamond
RAM assembly mixed combination Pin-Lock safety button and bowrench key f/1" diameter Arm size B
Frequently asked questions (FAQ) about RAM f mount lock box /Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT Who are the RAM mounting systems?
How to describe the RAM mounting lock box for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT?
Who is RAM's mounting system themes? RAM stands for Round-A-Mount and started in 1995. Using the finest assembly material, durable composites, steel, stainless steel, rubber and aluminum, our mounting bases and complete kits are manufactured to perform above expectations and remain cost effective. For your next mounting application, choose RAM.How to describe RAM Mount Lock Case for Garmin dezl. ™760LMT, nuvi 2797LMT and RV 760LMT? The car mounting frame is made of a comp lock box?High strength osite and hole pattern, which can be attached to any RAM components or bases containing common parts.
Save $4 when you purchase the RAM Holder Lock Enclosure for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT for only $39 from NVN Marine! Same day dispatch before 3 p.m. RAM Mount Locking Case for Garmin dezl™760LMT, nuvi 2797LMT and RV 760LMT Technical Specifications
| Type: | Ram Mount Store | GPS Mounts |
|---|---|
| Supplier: | RAM Mounting Systems |
| Weight: | 0.6 lbs |
| Shipping Weighttion: | 0.6 lb |
|---|---|
| Box sizes: | 1, 00 (h) x 5.00 (w) x 8.00 (l) |
| Cubic feet: | 40 ,0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
- RAM Mount Lil' Buddy with Garmin Ball - Requires Garmin G-Ball
- RAM Mount Lil' Buddy Mounting System - Requires Cradle
- Lil' Buddy RAM holder for Garmin Montana series
- RAM Mount Level Cup XL with small Tough-Claw
- RAM Mount Level Cup XL with Single Socket for 1" Size B Ball
- RAM Mount Level Cup XL with Double Socket Long Arm
- RAM Mount Level Cup XL with 1" Size B Ball
