RAM Mount No-Drill Vehicle System 04-10 Ford F150 Automotive/RV

Ford F-150 (2004-2010) vehicle base
Ford F-150 (2004-2010)
Lincoln Mark LT (2005-2010)

This laptop stand without drilling The system installs quickly and easily in specified vehicles using existing passenger side seat rail hardware. This configuration offers a telescopic function ranging from 12 to 18 inches. Dual swing arms provide 12 inches of articulation and reach to allow passengers and driver access to the mounted unit. Patented rubber ball and socket joint provides additional adjustability as well as shock and vibration isolation.

Bracket Placement:
Passenger side floor panel, under seat

Drilling requirements:
No - uses existing seat bolts

Seat configuration:
Bucket/Bench

Pole:
Purchased separately

Weight:
9.1 lbs.

MatMaterial:
Powder coated steel

Features:
Quick installation with no drilling required. Rock-solid construction with a lifetime warranty. The RAM Tough-Tray is a spring-loaded expandable tray that accommodates laptops 10 to 16 inches wide. The deck includes four (4) side clamp arms with rubber grip. These arms can be moved vertically and horizontally. This allows for a custom fit for different laptop thicknesses and the freedom of not blocking ports or drives. Holes on the perimeter of the tray make it easy to mount additional RAM systems to support GPS, PDAs or other electronic devices.

Heavy Duty Tray Dimensions:
Tray Depth: 10.0"
Tray Thickness: 2.125"
Tray Width (Extension): 10" at 16"
Height of side clamp arm: 0.5" (min) at 1,75" (max)

Material:
High strength composite

The RAM RAM-VP-SW1-89, Swing arm/telepole combo system, will connect to any RAM vehicle base without soldered female telepole Included is a tele pole with a height range of 11.5" to 17" it can be easily adjusted in; rotating the knob at the top of the message Once the knob is tightened, the tele-pole becomes a rigid support for any RAM cradle, stand or Tough-Tray.

The double swing arm with rotating plate allows you to rotate. and tilt the viewing angle of your laptop, tablet, UMPC, monitor or other connected electronic device, when mounted on your RAM vehicle mount Taking the highly successful RAM vehicle mounts to a new level. Superior, this rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place.Height of the dual swing arm is 12".

Material:
Powder coated marine grade aluminum

Vehicle base Ford F-150 (2004) -2010) ) Ford F-150 (2004-2010) Lincoln Mark LT (2005-2010) This No-Drill™ laptop support system can be installed quickly and easily using existing hardware of the following components To the vehicle designated: passenger...
PRODUCT ID: 39908
SKU: NVN-39908
CSKU: CWR-39908
REWRITE: 51019-ram-mount-no-drill-vehicle-system-04- 10
MPN: RAM-VB-109-SW1
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: RAM Mount No Drill Vehicle System 04-10 Ford F150
NAME_EX: RAM MOUNT NO DRILL VEHICLE SYSTEM 04-10 FORD F150
TITLE: RAM Mount No Drill Vehicle System 04- 10 Ford F150
TYPE: Automotive/RV | Vehicle Laptop Mounts
SUPPLIER: RAM Mounting Systems
ELECTRONIQUE> GPS ACCESSORIES> GPS MOUNTS 6" Dual Vertical Swingarms for Ram Mount w-6.25" x 2" Rectangular Base and

Gtags:

RAM Mounts
Fish finder
Chart plotter

GSpecs:

RAM Mount No-Drill Vehicle System 04-10 Ford F150 Product Description Vehicle Base Ford F-150 (2004-2010)
Ford F-150 (2004-2010)
Lincoln Mark LT (2005) -2010)

This no-drill laptop support system installs quickly and easily in specified vehicles using existing passenger side seat rail hardware. This configuration offers a telescopic function ranging from 12 to 18 inches. Dual swing arms provide 12 inches of articulation and reach to allow passengers and driver access to the mounted unit. Patented rubber ball and socket joint provides additional adjustability as well as shock and vibration isolation.

Bracket Placement:
Passenger side floor panel, under seat

Drilling requirements:
No - uses existing seat bolts

Seat configuration:
Bucket/bench

Pole:
Purchased separately

Weight:
9.1 lbs.

Material:
Powder coated steel

Features:
Quick installation installation with no drilling required. Solid construction with a lifetime warranty.

The RAM Tough-Tray is a spring-loaded expandable tray that accommodates laptops 10 to 16 inches wide. The deck includes four (4) side clamp arms with rubber grip. These arms can be moved vertically and horizontally. This allows for a custom fit for different laptop thicknesses and the freedom of not blocking ports or drives. Holes on the perimeter of the tray make it easy to mount additional RAM systems to support GPS, PDAs or other electronic devices.

Heavy Duty Deck Dimensions:
Depth of Deck: 10.0"
Thickness of Deck: 2.125"
Width of Deck:table (extension): 10" to 16"
Side clamp arm height: 0.5" (min) to 1.75" (max)

Material:
High strength composite

The RAM RAM-VP-SW1-89, combined swing arm/telepole system, will connect to any RAM vehicle base without soldered female telepole. Included is a TV pole with a height range of 11.5" to 17"; it can be easily adjusted by turning the knob at the top of the pole. Once the knob is tightened, the tele-pole becomes a rigid support for any RAM cradle, stand or Tough-Tray.

The dual swing arm with rotating plate allows you to rotate and tilt the angle of view of your laptop, tablet, UMPC, monitor or other connected electronic device, when mounted on your RAM vehicle mount. Taking the highly successful RAM vehicle mounts to the next level, this rotating swivel arm gives you even more viewing positions foryour electronic device mounted while holding everything firmly in place. The length of the dual swing arm is 12".

Material:
Powder coated marine grade aluminum

Ford F-150 vehicle base ( 2004-2010) ) Ford F-150 (2004-2010) Lincoln Mark LT (2005-2010) This No-Drill™ laptop support system can be installed quickly and easily using existing hardware from the following components Au Designated Vehicle: Passenger...

No-Drill Vehicle System for RAM Mount 04-10 Ford F150 Related ProductsRAM Mount Laptop Screen Support System
Secure N Motion Kit for RAM Mount
Universal RAM Mount Laptop Tray Side Supports Qty. 4

RAM Mount Vehicle System Frequently Asked Questions (FAQ) No Drill 04- 10 Ford F150 Who are RAM Mount Systems? How to Describe Vehicle RAM Mount No Drill System 04-10 Ford F150?
Who is RAM Mounting Systems? RAM stands for Round-A-Mount and started in 1995. Using the finest assembly hardware, durable composites, steel, stainless steel, rubber and aluminum, our mounting bases and Complete kits are manufactured to perform above expectations and remain profitable. . For your next editing application, choose wisely. Choose RAM.How to Describe RAM Mount No Drill 04-10 Ford F150 Vehicle System? Vehicle Base Ford F-150 (2004-2010) Ford F-150 (2004-2010) Lincoln Mark LT (2005-2010) This No-Drill™m laptop support system can be installed quickly and easily at the using existing hardware of the following components To designated vehicle: Passenger...

Save $21 when you purchase the RAM Bracket No-Drill Vehicle System 04-10 Ford F150for only $331 from NVN Marine! Free same day deliveryeven before 3 p.m. RAM Mount No-Drill Vehicle System Videos 04-10 Ford F150 RAM Mount No-Drill Vehicle System Videos 04-10 Ford F150 Technical Specifications

Type:	Automotive/RV \| Vehicle Laptop Mounts
Supplier:	RAM Mounting Systems
Weight:	31.6 lbs
Product manual:	Download PDF

RAM Mount No-Drill Vehicle System 04-10 Ford F150 User ReviewsRAM-Mount No-Drill Vehicle System RAM fitment 04-10 ford F150 Shipping & Returns

Shipping Weight:	31.6 lbs
Box sizes:	2.00 (h) x 10.00 (w) x 10.00 (w)
Cubic feet:	200.0
Returnable:	Yes