RAM Mount Small Tough-Claw Base with Short Dual-Grip Arm and Universal X-Grip Cell/iPhone Holder Ram Mount Store

Small Tough-Claw™ base with short dual-grip arm and universal X-Grip cell/iPhone holder

The RAM-B-400-A-HOL - UN7BU consists of the Tough-Claw™ rail clamp base, a SHORT double socket arm and a universal spring-loaded X-Grip phone holder. The spring-loaded X-Grip mount expands and contracts, allowing a perfect custom fit for your tablet. Easy-access handle buttons are included for quick insertion and release of your handheld device. The Tough-Claw™ Rail Clamp Base is the ideal mounting base for quick and easy tool-free installation and removal on round, square and odd-shaped rails and bars. The Tough-Claw™ can be attached to rails with an outside diameter of 0.625" to 1.5". Perfectly suited for mounting on aircraft yokes, bicycle handlebars and seat posts, kayak rails, roll bars and much more.ore, the RAM Tough-Claw™ will soon become another essential RAM component in your collection of mounting options.

The X-Grip includes a tether recording device recommended for outdoor applications . The mount is compatible with portable devices that fit the dimensions listed below. It is important to check the dimensions of your wearable device with case/sleeve/skin when determining overall size.

Clamping range (rail/tube surfaces):

0.625" to 1.5"

Clamping range (flat surfaces):

0" to 1.14"

Cradle dimensions

Minimum width = 1.875" (minimum height = 4.25")
Maximum width = 3.25" (minimum height = 2.25")
Depth = 0.875"

Features:

Anti-rust
High strength composite and steel constructionoxidizable
Spring mount expands and contracts for a perfect fit for your device
Rubber coated tips will keep the device firm and stable
Grip technology allows for multiple adjustment angles and device articulation
Includes tether for open cockpit and extreme environments
Lifetime warranty
Made in the USA

Material:

Marine powder coated grade aluminum, marine grade stainless steel components and high strength composite

Ball size:

1" rubber ball size "B"

Note :

The "U" in the part number reflects the product packaged in a poly bag RAM strongly recommends using the supplied Tether for all open cockpit applications when l. use of this product.

Phone supportone includes Tough-Claw Rail Clip Mount, Double Slot Short Arm and Universal Spring Loaded X-Grip Phone Mount for Spring Loaded X-Grip Phones...
PRODUCT ID: 68052
SKU: NVN -68052
CSKU: CWR-68052
REWRITE: 79163-ram-mount-small-tough-claw-base-w-short-double
MPN: RAM-B-400-A-HOL-UN7BU
UPC: 793442948657
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
SKU:
NAME: RAM Mount Small Tough -Claw™ Base with Short Double Grip Arm and Universal X-Grip Cell/iPhone Mount
NOM_EX: RAM MOUNT TOUGH-CLAW WITH SHORT DOUBLE GRIP ARM
PTITLE: RAM Mount Small Tough-Claw™ Base with Short Double Grip Arm and Universal X-Grip Cell/iPhone Mount
TYPE: Ram Mount Store | Rail/Handlebar Mounts
SELLER: RAM Mounting Systems
ELECTRONICS> GPS ACCESSORIES RAM X-Grip Phone Mount with RAM Tough-Susmall clamp base pport

Gtags:

RAM Supports
Handlebar
Clamp

GSpecs:

Small Tough-Claw™ RAM Mount Base with Short Dual-Grip Arm and Universal X-Grip Cell/iPhone Mount Product Description

Small Tough-Claw™ Small Base with Short Dual-Grip Arm and Universal Mount X-Grip Cell Phone/iPhone Holder

The RAM-B-400-A-HOL-UN7BU consists of a Tough-Claw™ rail clamp base, a SHORT double socket arm and a spring-loaded universal X-Grip. phone holder. The spring-loaded X-Grip mount expands and contracts, allowing a perfect custom fit for your tablet. Easy-access handle buttons are included for quick insertion and release of your handheld device. The Tough-Claw™ Rail Clamp Base is the ideal mounting base for quick and easy tool-free installation and removal on round, square and odd-shaped rails and bars. The Tough-Claw™ can be attached to rails with an outside diameter of 0.625" to 1.5". Perfectly suited for mounting on an aircraft yoke, bicycle handlebars and seat posts, kayak rails, roll bars and much more, the RAM Tough-Claw™ will make it another component RAM essential in your collection of mounting options.

The X-Grip includes a device tether recommended for outdoor applications. The mount is compatible with portable devices that fit the dimensions listed below. It is important to check the dimensions of your handheld device with a case/pouch/skin when determining the overall size.

Clamping range (rail/tube surfaces) :

0.625" to 1.5"

Clamping range (flat surfaces):

0" at 1.14"

Cradle dimensions

Minimum width = 1.875" (minimum height = 4.25")
Maximum width = 3.25" (minimum height = 2.25")
Depth= 0.875"

Features:

Rustproof
High strength composite and stainless steel construction
Spring-loaded mount expands and contracts for a perfect fit for your device
Rubber-coated tips will keep the device firm and stable
Technology grip feature allows for multiple adjustment angles and articulation of the device.
Includes tether for open cockpit and extreme environments
Lifetime warranty
Made in USA

Material:

Marine grade powder coated aluminum, marine grade stainless steel components and high strength composite

Ball size:

1" size "B" rubber ball

Note:

The "U" in the part number reflects product packaged in a poly bag. RAM recoverymstrongly recommend using the provided Tether for all open cockpit applications when using this product.

Phone mount includes a Tough-Claw rail clip mount, a double of short length. slotted arm and universal spring-loaded X-Grip mount for phones. Spring-loaded X-Grip...

Frequently Asked Questions (FAQ) about RAM support. Small Tough-Claw™ Base with Short Double Grip Arm and Universal X-Grip Cell/iPhone Mount Who is RAM Mounting Systems?
How to Describe the RAM Mount Small Tough-Claw™ Base with Short Double Arm Universal X-Grip Cell/iPhone Grip and Mount?
Who is RAM Mounting Systems? RAM stands for Round-A-Mount and started in 1995. Using the finest assembly hardware, durable composites, steel, stainless steel, rubber and aluminum, our mounting bases and Complete kits are manufactured to perform above expectationsand remain profitable. . For your next editing application, choose wisely. Choose RAM.How do you describe the small Tough-Claw™ RAM-mount base with short dual-grip arm and universal X-Grip cell/iPhone holder? The phone mount includes a Tough-Claw rail clip mount, a double-slotted short arm, and a universal spring-loaded X-Grip mount for phones. Spring Loaded X-Grip...

Save $9 when you purchase the Small Tough-Claw™ RAM Mount Base with Double Socket Short Arm and universal X-Grip. Grip Cell/iPhone Holderfor only $78 from NVN Marine! Same day dispatch before 3 p.m. RAM Mount Small Tough-Claw™ Base with Short Double-Grip Arm and Universal X-Grip Cell/iPhone Holder Videos RAM Mount Small Tough-Claw™ Base with Short Double-Grip Arm and Universal X-Grip Cell/iPhone Holder iPhone Technical Technical Specifications

Type:	Ram Mount Store \| Rail/Handlebar Mounts
Supplier:	RAM Mounting Systems
Weight:	0.7 lbs

Small Tough-Claw™ base with RAM Mount with Double Grip Short Arm and X-Grip Universal Cell/iPhone Holder User ReviewsRAM Mount Small Tough-Claw™ Base with Double Grip Short Arm and X-Grip Universal Cell/iPhone Holder Shipping & Returns

Shipping weight:	0.7 lbs
Sizes of boxes:	3.00 (h) x 4.00 (w) x 8.00 (w)
Cubic feet:	96.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return policyand refund here.