RAM Mount Universal ATV/UTV Handle Holder Strap Holder Ram Mount Store

RAM Universal ATV/UTV Handle Holder, Strap Mount
Part #: RAM-B-149Z-2-UN4

Whether your UTV or ATV is bone or loaded with accessory racks and guards, the new RAM Strap Base lets you choose the best possible mounting location for almost anything. Designed for a clean installation, this base fits the most common tube sizes on UTVs and ATVs, allowing placement of the RAM rubber ball base. By safely hiding a strap pliers in a compact case, you won't have to worry about exposed sharp edges or unwanted loosening. With the spherical base in place, you have the base to mount everything from GPS, cell phones, radios, or perhaps the famous RAM self-leveling cup holder. No matter what you choose to do with it, you'll wonder why your UTV or ATV didn't come from the factory with this essential product.

Dimensions of the strap:
1.57" (40 mm) up to a maximum of 3.15" (80 mm)

Universal finger support Description:
b>
RAMThe Finger Grip Universal Composite Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible, rubber-covered fingers placed along the sides to grip your device. The fingers are opened by squeezing the ends to open the little finger arms. The bottom of the stand includes a backplate that adds support to the device held by the stand. The back plate contains universal AMPs and 1.5" x 2" hole patterns.

This mount is designed to hold the following devices:
Cell Phones
2-way Radios
GPS devices

Height dimensions:
Minimum with top and bottom plates: 5.25"
Maximum with top and bottom plates : 6.0"
The plateUpper and lower s can be removed for larger devices.

Spine plate dimensions:
3" width x 3" height

Using a short arm Side clamps:
Maximum depth: 0.75"
Minimum width: 1.25"
Maximum width: 3.0"

Using Medium Arm Side Clamps:
MaxiDepth: 1.25"
Minimum Width: 1.5"
Maximum Width: 3.5"

Using Long Arm Side Clamps:
Maximum Depth: 1.6"
Minimum Width: 2.25"
Maximum Width: 3.5"

Material:
High strength composite and powder coated marine grade aluminum

Bullet size:
Bullet 1" Rubber Size B

Note:
Part number reflects product packaged in a clear clamshell for display on store shelves

Includes a steel strap base, ae U-bolt base, a double-slotted arm and a universal finger rest. The mount uses a patented rubber ball and sleeve with a RAM diameter 1...
PRODUCT ID: 44145
br> SKU: NVN-44145
CSKU: CWR-44145
REWRITE: 55256-ram-mount-universal-finger-grip-holder-atv-utv
MPN: RAM-B-149Z-2- UN4
UPC: 793442905612
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: RAM Mount Universal ATV/UTV Finger Grip Mount Strap Mount
NAME_EX: UNIVERSAL GRIP HOLDER FOR FINGER RAM MOUNT STRAP ATV/UTV MNT
TITLE: RAM Mount Universal Handle Holder ATV/UTV Strap Holder
TYPE: Ram Mount Store | Rail/Handlebar Mounts
SELLER: RAM Mounting Systems
ELECTRONICS> GPS ACCESSORIES Ram Atv/utv Rail Mount With Finger Grip Support for GPS, two-way radio,
Category Amazon:
Gtags:

RAM supports

GSpecs:

RAM Mount Universal Handle Bracket Strap Mount for ATV/UTV Product Description RAM Universal Handle Bracket Strap Bracket for ATV/UTV
Part Number: RAM-B-149Z-2- UN4

Whether your UTV or ATV is bone stock or loaded with accessory racks and guards, the new RAM Strap Base lets you choose the best possible mounting location for almost anything. Designed for a clean installation, this base fits the most common tube sizes on UTVs and ATVs, allowing placement of the RAM rubber ball base. By safely hiding a strap pliers in a compact case, you won't have to worry about exposed sharp edges or unwanted loosening. With the spherical base in place, you have the base to mount everything from GPS, cell phones, radios, or perhaps the famous RAM self-leveling cup holder. No matter what you choose to do with it, you'll wonderFind out why your UTV or ATV didn't come from the factory with this essential product.

Strap dimensions:
1.57" (40 mm) up to a maximum of 3.15" (80 mm)

Support Universal Finger Holder Description:
The RAM Composite Universal Finger Holder is designed to hold a large quantity of cell phones and electronic devices. The holder comes with (3 sets) of four flexible, rubber-covered fingers placed along the sides to grip your device. Fingers open by squeezing the ends to open the little arms. The bottom of the stand includes a backplate that adds support to the stand. device held by the support. The backplate contains the universal AMPs and 1.5" x 2" hole patterns.

This mount is designed to hold the following devices:
Cell. Telephones
Two-way radios
GPS devices

Height dimensions:
Minimum withtop and bottom plates: 5.25"
Maximum with top and bottom plates: 6.0"
Top and bottom plates can be removed for larger units.

Dimensions of the spinal plate:
3" width x 3" height

Use of short arm side clamps:
Maximum depth: 0, 75"
Minimum width: 1.25"
Maximum width: 3.0"

Using medium arm side clamps:
Maximum depth: 1 .25"
Minimum width: 1.5"
Maximum width: 3.5"

Using long arm side clamps:
Maximum depth: 1.6"
Minimum width: 2.25"
Maximum width: 3.5"

Material:
High strength composite and marine grade aluminum Powder Coated

Ball Size:
1" Rubber Ball Size "B"

Note:
Part number reflects the product packaged in a tr caseansparente for display on store shelves.

Includes steel strap base, U-bolt base, double. -slotted arm and universal finger support. The mount uses a patented rubber ball and sleeve with a RAM diameter 1...

Frequently Asked Questions (FAQ) about RAM Mount Universal Handle Mount Strap Mount for ATV/UTV Who is RAM Mounting Systems? How to describe the RAM Mount Universal ATV/UTV Handle Bracket? Who is RAM Mounting Systems? RAM stands for Round-A-Mount and debuted in 1995. Using the finest assembly hardware, durable composites, steel, stainless steel, rubber and aluminum, our mounting bases and complete kits are manufactured to perform above expectations and stay profitable. For your next editing application, choose wisely. Choose RAM.How to describe RAM Mount Universal Handle Holder forATV/UTV? Features a steel strap base, U-bolt base, double slotted arm and universal finger support. The mount uses a patented rubber ball and sleeve with a RAM diameter of 1...

Save $10 when you purchase the Universal Mount Finger Grip for RAM Rack, Strap for ATV/UTV Mountfor only $82 from NVN Marine! Same day dispatch before 3 p.m. Universal Finger Grip Bracket RAM Mount ATV/UTV Strap Bracket Videos Universal Finger Grip Bracket RAM Mount ATV/UTV Strap Bracket Technical Specifications

Type:	Ram Assembly store \| Rail/Handlebar Mounts
Supplier:	RAM Mounting Systems
Weight:	1.5 lbs

Universal Finger Grip Holder for RAM Holder ATV/UTV Strap Holder User ReviewsHand Strap HolderBorne Universal Finger for RAM Rack ATV/UTV Strap Mount Shipping & Returns

Shipping Weight:	1.5 lbs
Box sizes:	1.00 (h) x 3.00 (w) x 5.00 (w)
Cubic feet:	15.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy shipping and you can find our return and refund policy here.