RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base Ram Mount Store

X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base

The RAM-B-174-A-UN7 consists of the hardware for the mounting on the brake/clutch. tanks and rails from 0.5" to 1.25" diameter, short dual grip arm and universal X-Grip cell phone holder. Designed into the mount, a patented 1" diameter rubber ball and socket system with adjustment points at both ends of the socket arm; this, by turning the arm knob, allows you to move the mount Grip to your optimal viewing position Mounting hardware for the brake/clutch reservoirs includes standard and metric mounting bolts. The included X-Grip bracket has a sleek, clever design that provides plenty of holding power without. hide your phone behind foam pads and plastic The X-Grip holder expands and contracts, allowing for a personalized fit.made from your cell phone. A perfect complement to the modern, stylish interior of today's vehicles, the RAM X-Grip is the cel.Phone holder has evolved. The X-Grip includes a device tether recommended for exterior applications. The mount is compatible with portable devices that fit the dimensions listed below. It is important to check the dimensions of your portable device with a case/sleeve/skin when determining the overall size.

Specifications:

Cradle dimensions:

Minimum width = 1.875" (minimum height = 4.25" )
Maximum width = 3.25" (Minimum height = 2.25")
Depth = 0.875"

Includes:

(QTY: 1), optional clip included
Material: Powder coated marine grade aluminum, marine grade stainless steel components and high strength composite
Bale size : 1" Size B Rubber Ball
Note: The "U" in the part number reflects the product packaged in a poly bag. To see if the RAM-B-174-UN7 fits mounts on your motorcycle, check the hole spacing of the base in relation to your clutch/brake reservoir. The hole centers have a minimum width of 0.94" and a maximum of 1.58". use the supplied Tether for all open cockpit applications when using this product.
Weight: 0.88 lbs

Phone X- Grip base with motorcycle brake/clutch fuel tank base RAM-B-174-A-UN7 contains hardware for mounting on brake/clutch fuel tanks and rails with a diameter of 0.5 " to 1.25", short doubles the length.
PRODUCT ID: 75787
SKU: NVN-75787
CSKU: CWR-75787
REWRITE: 86898-ram-mount-x-grip. -phone-mount-w-motorcycle-brake-clutch
MPN: RAM-B-174-A-UN7U
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: RAM Mount X-Grip Phone Holder with Brake/Reservoir Base motorcycle clutch
EX_NAME: RAM MOUNT X-GRIP PHONE HOLDER WITH ARM BRAKE/CLUTCH BASE SHORT
PTITLE: RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base
TYPE: Ram Mount Store | Cell Phone Mounts
SELLER: RAM Mounting Systems
ELECTRONICS> GPS ACCESSORIES
AmazonCategory:

Gtags:

GSpecs:

RAM Mount X-Grip Phone Mount with Motorcycle Brake/Clutch Reservoir Base Product Description

X-Grip Phone Mount with Motorcycle Brake/Clutch Reservoir Base

The RAM -B-174-A-UN7 consists of hardware for mounting on brake/clutch reservoirs and rails from 0.5" to 1.25" in diameter, an arm with short double socket and a universal X-Grip cell phone holder. Designed into the mount, a patented 1" diameter rubber ball and socket system with adjustment points at both ends of the socket arm; this, by turning the arm knob, allows you to move the mount Grip to your optimal viewing position Mounting hardware for the brake/clutch reservoirs includes standard and metric mounting bolts. The included X-Grip bracket has a sleek, clever design that provides plenty of holding power without. hide your phone behinde foam pads and plastic. The X-Grip mount expands and contracts, allowing for a perfect custom fit of your cell phone. A perfect complement to the modern, stylish interior of today's vehicles, the RAM X-Grip is the ultimate phone mount advanced portable. The X-Grip includes a device tether recommended for exterior applications. The mount is compatible with portable devices that fit the dimensions listed below. It is important to check the dimensions of your portable device with a case/sleeve/skin when determining the overall size.

Specifications:

Cradle dimensions:

Minimum width = 1.875" (minimum height = 4.25" )
Maximum width = 3.25" (Minimum height = 2.25")
Depth = 0.875"

Includes:

(QTY: 1), optional clip included
Material: m-grade aluminumpowder coated arine, marine grade stainless steel components and high strength composite
Bullet Size: 1" Size B Rubber Bullet
Note: The "U" in the part number reflects the product packaged in a poly bag. To see if the RAM-B-174-UN7 will fit on your motorcycle, check the hole in the base against your clutch/brake reservoir. holes have a minimum width of 0.94" and a maximum of 1.58". RAM strongly recommends using the supplied Tether for all open cockpit applications when using this product.
Weight: 0.88 lbs

Phone X-Grip base with motorcycle brake/clutch fuel tank base RAM-B-174-A-UN7 contains hardware for mounting on brake/clutch fuel tanks and rails with a diameter of 0.5" to 1.25", short doubles the length. "utf-8"> Frequently asked questions (FAQ) about propbones of the RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base Who are RAM Mount Systems? How to Describe the RAM Mount motorcycle brake/clutch?
Who is RAM Mounting Systems? RAM stands for Round-A-Mount and debuted in 1995. Using the finest assembly hardware, durable composites, steel, stainless steel, rubber and aluminum, our mounting bases and complete kits are manufactured to perform beyond expectations and remain profitable. For your next editing application, choose wisely. Choose RAM.How to describe the RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base? X-Grip Phone Base with Motorcycle Brake/Clutch Fuel Tank Base RAM-B-174-A-UN7 contains mounting hardware on brake/clutch fuel tanks and mounting railsn diameter from 0.5" to 1.25", short Double the length. .

Save $8 when you purchase the RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base for only $66 from NVN Marine! Same day dispatch before 3 p.m. RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base Videos RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base Technical Specifications

Type:	Ram assembly store \| Cell Phone Mounts
Vendor:	RAM Mounting Systems
Weight:	0.85 lbs
User Guide:	Download PDF
Product installation:	Download PDF

RAM Mount X-Grip Phone Holder with Brake/Clutch Reservoir Basemotorcycle ge User Reviews RAM Mount X-Grip Phone Holder with Motorcycle Brake/Clutch Reservoir Base Shipping & Returns

Shipping Weight:	0.85 lbs
Box sizes:	1.00 (h) x 3.00 ( l) x 5.00 (l)
Cubic feet:	15.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms, please check our shipping policy and you can find our shipping policy return and refund here.