Raymarine P79 adjustable in-hull probe Marine Navigation & Instruments

The P79 Adjustable In-Hull Depth Transducer is ideal for boats with fiberglass hulls that are looking for quick and easy installation, high-speed performance, or for those who want to minimize drag. The transducer installs inside the boat hull, transmitting and receiving echoes through the solid fiberglass bottom, without any protrusion from the hull. The P79 comes with an innovative flange that installs inside the boat hull using quick-setting marine epoxy. No cutting or drilling is required. Using built-in markings, the flange is aligned to match the dead rise angle of the boat hull. Once installed and made liquid tight, the flange is filled with non-toxic propylene glycol antifreeze and the active transducer cap is attached. Finally, the transducer cap is dialed in and locked in place for a straight beam and returnsmaximum echo. The P79 design accommodates a wide range of dead rise angles from 2 degrees to 22 degrees. This transducer is intended for use on vessels with solid fiberglass hulls up to 5/8 inches thick. The P79 can also be used on aluminum hulls less than 3.8 millimeters thick.

Raymarine E66008 Attributes

Mounting Location: In-Hull Mount
Number of pins: 8
Depth: 1,000 feet maximum depth at low frequency/ 600 feet maximum depth at high frequency
Rated power: 600 watts
Frequency range: 50/200 kHz frequency
Supported angle: 45 / 12 degrees beamwidth / 2 to 22 degrees deadrise
Cable length: 30 feet

Raymarine E66008 Features and Benefits

Using built-in markings, the flange is aligned to match the cock's elevation angleboat.
The P79 adjustable in-hull depth transducer is ideal for boats with fiberglass hulls looking for quick and easy installation, high-speed performance
The transducer installs inside the boat hull, transmitting and receiving echoes through the solid fiberglass bottom without any protrusions from the hull.r
Includes an innovative flange that installs inside boat hull using fast-setting marine epoxy
No cutting or drilling required
2-year limited warranty

Raymarine E66008 Warranties

Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf

In- Transducer hull transducer
Adjustable 600 watt inclined hull transducer. (P79)

Compatible with the following echo sounders:

SL Series: SL755RC, SL760RC, SL1250 and SL1250RC

hsb2 Plus Series: L755RC, L760, L760RC, L1250 and L1250RC

hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D and L1260DRC

Compatible shell material : fiberglass

Maximum power: 600 W

Frequency: 200 /50 kHz

Beam angles: 200 kHz 11 50 kHz 45

Features:

Depth only.
Can be used in conjunction with speed and temperature E66019 ST69ure sensor
Easily adjusts to any rise angle up to 22°
Transmits sound waves directly to the bottom so that strong echoes are reflected back to the transducer
Can be removed in seconds for maintenance or storage
Only the base piece is glued to the hull. There is no adhesive layer under the face of the transducer to absorb sound energy
Simplifies installation in the hull

30ft cable (10m)

The unique adjustable angle design of the Raymarine P79 for DSM unit ensures that the beam is aimed vertically to achieve maximum echo return and best performance. because...
PRODUCT ID: 13902
SKU: NVN-13902
CSKU: CWR-13902
REWRITE: 25013-raymarine-p79-adjustable-in-hull-transducer
MPN : E66008
UPC: 023193660080
ASIN: B00I0SEDB6
WSKU: RAYE66008
SSKU: RAY-E66008
KSKU: RAYE66008
GSKU:
MSKU:
LSKU:
NAME: Raymarine P79 in-hull adjustable transducer
EX_NAME: RAYMARINE E66008 HULL DEPTH F/ 1250+/760+/755+,DSM300
PTITLE: Raymarine P79 in-hull adjustable transducer
TYPE: Navigation and maritime instruments | Transducers
SELLER: Raymarine
ELECTRONICS> MARINE ELECTRONICS> FISH FOUNDERS
Furniture
Raymarine 50/200 KHz, P79 in-Hull, DSM30
Title Google: Adjustable transducer ins the Raymarine P79 hull
Furniture
Gtags:

Raymarine

GSpecs:

Raymarine P79 In-Hull Adjustable Depth Transducer Product Description

The P79 In-Hull Adjustable Depth Transducer is ideal for boats with fiberglass hulls that are looking for quick and easy installation, high-speed performance or for those who wish to minimize drag. The transducer installs inside the boat hull, transmitting and receiving echoes through the solid fiberglass bottom, without any protrusion from the hull. The P79 comes with an innovative flange that installs inside the boat hull using quick-setting marine epoxy. No cutting or drilling is required. Using built-in markings, the flange is aligned to match the dead rise angle of the boat hull. Once installed and made liquid tight, the flange is filled with non-toxic propylene glycol antifreeze and the active transducer cap is attached. Finally, the transducer cap est dialed and locked in place for a straight beam and maximum echo returns. The P79 design accommodates a wide range of dead rise angles from 2 degrees to 22 degrees. This transducer is intended for use on vessels with solid fiberglass hulls up to 5/8 inches thick. The P79 can also be used on aluminum hulls less than 3.8 millimeters thick.

Raymarine E66008 Attributes

Mounting Location: In the shell Mounting
Number of pins: 8
Depth: Maximum depth of 1,000 feet at low frequency/Maximum depth of 600 feet at high frequency
Rated power: 600 watts
Frequency range: Frequency 50/200 kHz
Angle taken under load: Beam width 45/12 degrees /2 to 22 degrees Deadrise
Cable Length: 30 feet

Raymarine E66008 Features and Benefits

Using built-in markings, the flange is aligned to match the dead rise angle of the boat's hull
P79 Adjustable In-Hull Depth TransducerIt is ideal for boats with fiberglass hulls that want quick, easy installation and high-speed performance.
The transducer installs inside the boat hull, transmitting and receiving echoes through the solid fiberglass bottom without any protrusion from the hull. /li>
Features an innovative flange that installs inside the boat hull using quick-setting marine epoxy
No cutting or drilling is required
2 Year Limited Warranty
li>

Raymarine E66008 Warranties

Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0 .pdf

Adjustable in-hull transducer
600 watt adjustable angle hull transducer. (P79)

Compatible with the following echo sounders:

SL Series: SL755RC, SL760RC, SL1250 and SL1250RC

hsb2 Plus Series: L755RC, L760, L760RC, L1250 and L1250RC

hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D and L1260DRC

Compatible shell material: fiberglass

>Maximum power: 600 W

Frequency: 200/50 kHz

Beam angles: 200 kHz 11 50 kHz 45

Features:

Depth only.
Can be used in conjunction with E66019 ST69 Speed and Temperature Sensor
Easily adjusts to any tilt angle up to 22
Transmits sound waves directly to the bottom so that strong echoes are reflected back to the transducer
Can be removed in qFew seconds for maintenance or storage
Only the base part is glued to the hull. There is no adhesive layer under the face of the transducer to absorb sound energy
Simplifies installation in the hull

30 ft (10 m) cable

The unique adjustable angle design of the Raymarine P79 for DSM unit ensures that the beam is aimed vertically to achieve maximum echo return and the best performance. because...

Raymarine P79 adjustable in-hull transducer Related productsAirmar Deadrise Angle Finder - Accuracy of ± 1/2°
Vexilar A.C.E. Epoxy Transducer

Frequently Asked Questions (FAQ) about the Raymarine P79 In-Hull Adjustable Transducer Who is the Raymarine?
How to describe the Raymarine P79 In-Hull Adjustable Transducer?

br /> What is the power rating of the product?
Speed function included in the product?
How to startt mount or what is the mounting style of the adjustable transducer in the Raymarine P79 hull?
Can this product read temperature?
What is the cable length (feet)?
What is the type of imagination of the product?
What is the length of the cable?
Does this product support CHIRP and what is the type?
Who is the Raymarine? Raymarine, world leader in marine electronics, develops and manufactures the most complete range of electronic equipment. Raymarine is dedicated to the design, manufacture and distribution of the highest quality marine electronics products and services to the global leisure and light commercial markets. From stand-alone units to fully integrated systems, Raymarine understands boating and what it takes to make it safer. How to describe the Raymarine P79 Adjustable Integrated Transducer? Unique angled designadjustable of the Raymarine P79 for DSM unit ensures that the beam is aimed vertically to achieve maximum echo return and best performance. because...

Transducer with adjustable power of 600 watts
Compatible with Echo Sonar SL755RC, SL760RC, SL1250 and SL1250RC hsb2 Plus L755RC, L760, L760RC, L1250 and L1250RC hsb2

This transducer is adjustable and can be tilted into the hull for increased performance.
Compatible with a range of echo sounders, making it perfect for use on your boat.
600 watts of power output means you can enjoy high-quality sound without worrying about it being too loud.

The adjustable Raymarine P79 is a fully adjustable high performance floor stand for the Raymarine hsb2 and hsb2 Plus series. This pedestal rack is designed for use on boats whose hull material is not pas compatible with our standard P79 floor stand.

What is the power rating of the product? 600 watts

Transducer with adjustable power of 600 watts
Compatible with SL755RC, SL760RC, SL1250 and SL1250RC hsb2 Plus L755RC, L760, L760RC, L1250 and L1250RC hsb2 echo sounders
This transducer is adjustable and can be tilted in the hull to increased performance.
Compatible with a range of echo sounders, making it perfect for use on your boat.
600 watt output means you can enjoy high-quality sound without worrying about it being too loud.
The SL series is designed for use in smaller, more confined spaces.
The hsb2 Plus The series is designed for use in larger spaces large.
The HDFI series is designed for use in high-demand environments, such as restaurants and bars.
Functionne with all Echo fishfinders, including the SL series: SL755RC, SL760RC, SL1250 and SL1250RC. hsb2 Plus Series: L755RC, L760, L760RC, L1250 and L1250RC. hsb2 HDFI series: DSM250, L770D, L770DRC, L1260D
Compatible shell material: All Echo fishfinders are made of aluminum

Speed function included in the product? NoHow to mount or what is the mounting style of the adjustable transducer in the Raymarine P79 hull? In the shellCan this product read temperature? NoHow long is the cable (in feet)? 30'How imaginative is the product? StandardHow long is the cable? 30 feet Does this product support CHIRP and what type? No

Save $33 when you buy the Raymarine P79 Adjustable Hull Transducer for only $176 at NVN Marine ! Same day dispatch before 3 p.m. Raymarine P79 Adjustable Integrated Transducer Technical Specifications

Type:	Navigation and marine instruments \| Transducers
Supplier:	Raymarine
Weight:	2.8 lbs
Temperature:	No
Included speed:	No
Mounting style :	In the hull
Imagination:	Standard
Chirp:	No
Cable length (feet) :	30'
Product manual:	Download PDF
Product brochure:	Download PDF

Raymarine P79 Adjustable Hull Transducer User ReviewsRaymarine P79 Adjustable In-Hull Transducer Shipping & Returns

Shipping Weight:	2 .8 lb
Box sizes:	4.00 (h) x 8.00(l) x 10.00 (l)
Cubic feet:	320.0
Returnable:	Yes

To know the detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.