Raymarine RSW Wired - Intelligent and efficient wind transducer - Short arm with 30 m cable Marine Navigation & Instruments
RSW Wired - Smart High Performance Wind Transducer - Short Arm with 30M Cable
The RSW Wired Smart Wind Transducer is a professional level wind sensor designed to provide very accurate calibration. data on wind speed and direction. Supplied as standard with a 30 meter Smart Wind mast cable.
Install and go!
Raymarine Smart Wind technology provides precision expert level without the need for expensive additional processors or extensive calibration and configuration.
Refinement tuned
Through rigorous wind tunnel testing, we have fine-tuned and balanced the instrument to ensure that the data coming from the masthead are precise and consistent. .
Sail smarter
Reliable, high-precision true wind data combined with Alpha performance displays and tracAxiom map drivers let you navigate smarter.
Specifications:
Length
- Wind transducer (including cable): 657.762 mm(25.90 in)
- Wind transducer (excluding cable): 540.712 mm (21.29 in)
- Wired Gateway: 155.61 mm (6.13 in)
Width
- Wind transducer: 46.96 mm (1.85 in)
- Wired gateway: 47.38 mm (1.88 in)
Height
- Wind transducer: 305.86 mm (12.04 in)
- Wired gateway: 30.61 mm (1.21 in)
Power
- Rated supply voltage: 12V DC (via SeaTalk NG)
- Operating voltage range: 9 V to 16 V DC
- Power consumption: <100 mW
- Fuse blown: Make sure the SeaTalk NG main circuit is protected by a 5A fuse
- NMEA 2000 LEN (Load Equivalence Number)- based on a nominal voltage of 9 V: 1
Environmental
- Operating temperature range: - 25°C to +55°C (-13°F to +131°F)
- Storage temperature range: -30°C to +70°C (-22°F to +158°F)
- Relative humidity: Masthead: 100%/Below deck: up to 93% at 40°C
- Waterproofing rate: Wind transducer: IPx6/IPx7/Gateway wired: IPx3
- Wind: 115 mph (185 km/h)
- Vibration: EN 60945:2002 (exposed)
What's in the box?
- #10 x 3/4" x 4 self-tapping screws (for mounting the wind transducer)
- Self-tapping screws #7 x 3/4" x 2 (for mounting the gateway)
- 40 mm (1.57 in) heat shrink tubing (required to insulate the ground wire when shortening the mast cable)
- Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a surface(metal)
- Mast cable, 30 m (98.43 ft) spool
- Documentation
- Wind transducer
- Gateway Wind-Wired Smart Device
- SeaTalk NG to DeviceNet Adapter Cable, 120 mm (4.72 in)
PRODUCT ID: 102244
SKU: NVN-102244
CSKU: CWR-102244
REWRITE: 113355-raymarine-rsw-wired-smart-performance-wind
br>MPN: E70670
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: RAYMARINE RSWTRANSWIRED INTELLIGENT WIND TRANSDUCER
NAME_EX:
PTITLE : Raymarine RSW Wired - Smart and efficient wind transducer - Short arm with 30M cable
TYPE: Navigation and marine instruments | Instruments
SELLER: Raymarine
ELECTRONICS> MARINE ELECTRONICS
Gtags:
GSpecs:
Raymarine RSW Wired - Smart, high-performance wind transducer - Short arm with 30M cable Product description
RSW Wired - Smart, high-performance wind transducer - Short arm with 30M cable
The RSW Wired, Smart Wind Transducer is a professional-level wind sensor designed to provide highly accurate calibrated wind speed and direction data. Supplied as standard with a 30 meter Smart Wind mast cable.
Install and go!
Raymarine Smart Wind technology provides precision expert level without the need for expensive additional processors or extensive calibration and configuration.
Refinement tuned
Through rigorous wind tunnel testing, we have fine-tuned and balanced the instrument to ensure that the data coming from the masthead are precise and consistent. .
Navigate smarter
strong>Reliable, high-precision true wind data combined with Alpha performance displays and Axiom chartplotters let you sail smarter.
Specifications:
Length
- Wind transducer (cable included): 657.762 mm (25.90 in)
- Wind transducer (excluding cable): 540.712 mm (21.29 in)
- Wired gateway: 155.61 mm (6.13 in)
Width
- Wind transducer: 46.96 mm (1.85 in)
- Wired gateway: 47.38 mm (1.88 in) )
Height
- Wind transducer: 305.86 mm (12.04 in)
- Wired gateway: 30.61 mm (1.21 in)
Power
- Rated supply voltage: 12 V DC (via SeaTalk NG)
- Operating voltage range: 9 V to 16 V DC
- Power consumption: <100 mW
- Fuse rating : hasEnsure the SeaTalk NG backbone is protected by a 5A fuse
- NMEA 2000 LEN (Load Equivalence Number) - based on 9V rating: 1
Environment
- Operating temperature range: -25°C to +55°C (- 13°F to +131°F)
- Storage temperature range: -30°C to +70°C (-22°F to +158°F)
- Relative humidity: Masthead: 100%/ Under Deck: Up to 93% at 40°C
- Waterproof Rating: Wind Transducer: IPx6/IPx7/ Wired Gateway: IPx3
- Wind: 185 km/h (115 mph)
- Vibration: EN 60945:2002 (exposed)
What is in the box?
- Self-tapping screws #10 x 3/4" x 4 (for mounting the wind transducer)
- Self-tapping screws #7 x 3 2 self-tapping screws 4" ( for mounting the walkway)
- 40 mm (1.57 in) heat shrink tubing (required to insulate the ground wire when shortening the cableof the mast)
- Crimp terminal ring (required for additional ground connection when the gateway is not mounted on a metal surface)
- Mast cable, spool of 30 m (98.43 ft)
- Documentation
- Wind Transducer
- Smart Wired Wind Gateway
- SeaTalk NG to Adapter Cable DeviceNet, 120 mm (4.72 in)
Save $155 when you purchase the Raymarine RSW Wired - Smart, Performance Wind Transducer - Short Arm with 30M Cablefor only $694 at NVN Marine! Same day dispatch before 3 p.m. Raymarine RSW Wired - Smart, High Performance Wind Transducer - Short Arm with 30M Cable Technical Specifications
| Type: | Navigation & Marine Instruments | Instruments |
|---|---|
| Supplier: | Raymarine |
For detailed shipping policy, please visit our Shipping Policy and You can find our Return and Refund Policy here.
