Raymarine Type 1 12V Pump Marine Navigation & Instruments
For over 80 years, we have been the global leaders in high-performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide fully electronic systems to boaters around the world. Our products are designed for the harsh marine environment and are renowned for their ease of use, robust design and reliability. Our comprehensive line includes chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.
Raymarine M81120 Attributes- Compatibility: Steering Boats hydraulic
- Maximum pressure: 750 PSI
- Cylinder capacity: 4.9 cubic inches to 14 cubic inches capacity
- Rated voltage: 12 volts
- Mounting Type: Floor Mount
- Boats equipped with steering systemsTraditional hydraulics will use an Evolution autopilot driven by a hydraulic pump
- The pump connects to the boat's hydraulic steering lines and allows the autopilot to steer the boat by controlling the flow of fluid through the steering system. boat steering.
- Built to last longer
- Robust design and reliability
- Limited to 2 years Warranty
Type 1 12 Volt Pump
Hydraulic reversing pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering cylinders.
Type 1 hydraulic drive is compatible with S1/S1G and S2/S2G corepacks. Use the table below to determine the capacity of the Type 1 hydraulic drive when used with each corepack
Corepack used S1 or S1G
Cylinder capacity 4.9 inches - 10.5 inches
(80CC-172CC)
Prmaximum stall pressure at 12 V 750 psi (50 bar)
(no load) 67 in/min (1000 cc/min)
Used Corepack S2 or S2G
RAM Capacity 4.9 inches - 14 inches
(80 cc - 230 cc)
Maximum stall
Pressure at 12V 750psi (50bar)
Peak flow
(no load) 67 in/min (1000 CC/min)
You need to know the size (in cc) of the hydraulic circuit. cylinder cylinder installed on the rudder or drive unit of the inboard motor ship or outboard motor ship. your...
PRODUCT ID: 12743
SKU: NVN-12743
CSKU: CWR-12743
REWRITE: 23854-raymarine-type-1-pump-12v
MPN: M81120
br> br>UPC: 00023193811208
ASIN: B00GLWTD40
WSKU: RAYM81120
SSKU: RAY-M81120
KSKU: RAYM81120
GSKU:
MSKU:
LSKU: 152- M81120
br>NAME: Raymarine Type 1 12V Pump
EX_NAME: RAYMARINE PUMP M81120 TYPE I M81120
PTITLE: PumpRaymarine Type 1 12V
TYPE: Navigation and marine instruments | Autopilots
SELLER: Raymarine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT STEERING PARTS> WATERCRAFT STEERING CABLES
Sports
Raymarine M81120 Hydraulic Reversing Pump, Type 1, 12V,
RAYMARINPOMPE E M81120 TYPE I M81120
Sports
Gtags:
| Raymarine |
GSpecs:
Raymarine Type 1 12V Pump Product Description
For over 80 years, we have been the world leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide fully electronic systems to boaters around the world. Our products are designed for the harsh marine environment and are renowned for their ease of use, robust design and reliability. Our comprehensive line includes chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.
Raymarine M81120 Attributes- Compatibility: Hydraulic Steering Boats
- Maximum Pressure: 750 PSI
- Cylinder Capacity: Capacity from 4.9 cubic inches to 14 cubic inches
- Voltage rating: 12 Volt
- Mounting Type: Floor Stand
- Boats equipped with traditional hydraulic steering systems will use an Evolution autopilot driven by a hydraulic pump
- The pump connects to the boat's hydraulic steering lines and allows the autopilot to steer the boat by controlling the flow. Fluid through the boat's steering system
- Built to last longer
- Robust design and reliability
- 2 year limited warranty
Type 1 12 Volt Pump
Hydraulic reversing pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering cylinders.
Type 1 hydraulic drive is compatible with S1/S1G and S2/S2G corepacks. Use the table below to determine the capacity oftype 1 hydraulic drive when used with each corepack
Corepack used S1 or S1G
Cylinder capacity 4 .9 inch - 10.5 inch
(80CC-172CC)
Maximum stall pressure at 12 V 750 psi (50 bar)
(no load) 67 in/min (1,000 cc/min)
Corepack used S2 or S2G
RAM Capacity 4.9 inches - 14 inches
(80 cc - 230 cc)
Maximum dropout
Pressure at 12 V 750 psi (50 bar )
Peak flow
(no load) 67 in/min (1000 CC/min)
You need to know the size ( in cc) of the hydraulic cylinder installed on the rudder or on the drive unit of the vessel with an inboard engine or on the vessel with an outboard engine. your ...
Frequently asked questions (FAQ) about the Raymarine Type 1 12 V pump Who is the Raymarine?
How to describe the Raymarine Type 1 12 V pump?
What is the type of product?
What is the mounting type of the product?
What is the compatibility of this product?
Who is Raymarine? Raymarine, world leader in marine electronics, develops and manufactures the most complete range of electronic equipment. Raymarine is dedicated to the design, manufacture and distribution of the highest quality marine ctronic products and services to the global leisure and light commercial markets. From stand-alone units to fully integrated systems, Raymarine understands boating and what it takes to make it safer. How to describe the Raymarine Type 1 12V pump? You need to know the size (in cc) of the hydraulic cylinder installed on the rudder or drive unit of the inboard motor vessel or outboard motor vessel. your ...
- Compatible with S1/S1G and S2/S2G corepacks.
- Reversing pump for use with direct systemsion equipped with 4,914 cubic inch (80cc 230cc) hydraulic steering cylinders.
- Type 1 12 volt pump
- Type 1 pump is a hydraulic reversing pump intended for use with steering systems equipped with 4.914 cubic inch (80 cc to 230 cc) hydraulic steering cylinders.
- It can be used with the S1/S1G and S2/S2G corepacks, so it is compatible with all car models.
- Type 1 is a great choice for upgrading upgrade your old system.or build something from scratch.
The Raymarine Type 1 pump is a reverse hydraulic pump for use with steering systems Equipped with 4.9 to 14 cubic inches (80 cc – 230 cc) hydraulic steering cylinders. The pump is equipped with a manual cam lock and quick release lever to allow the steering cylinder to be disconnected from the pump in seconds during emergency situations.
What is the product type? Pumps/Drives- Compatible with S1/S1G and S2/S2G corepacks.
- Reversing pump for use with steering systems equipped with 4.914 cubic inch hydraulic steering cylinders ( 80 cc to 230 cc).
- 12 Volt Type 1 Pump
- The Type 1 Pump is a hydraulic reversing pump intended for use with steering systems equipped with 4.914 cubic inch (80 cc to 230 cc) hydraulic steering cylinders.
- It can be used with S1/S1G and S2/S2G corepacks, so it is compatible with all car models.
- The Type 1 is an excellent choice for upgrading your old stem system or building something from scratch.
- The reversing hydraulic pump is designed to be used in conjunction with a steering system equipped with hydraulic steering cylinders from 4.9 to 14 cubic inches (80 cc - 230 cc).
- The pump can be mountedon the left or right side of the steering cylinder and is equipped with a built-in check valve to prevent backflow.
- It features a high pressure relief valve which will automatically actuate if the pressure exceeds 1,000 psi (6,900 kPa).
- The Hydraulic Reversing Pump is a high quality, reliable product designed for use with steering systems equipped with 4.9 hydraulic steering cylinders to 14 cubic inches (80 cc - 230 cc).
- This pump will allow the operator to move the steering cylinder in either direction by simply reversing the flow of hydraulic fluid on one side of the pump to another.
- This product is made from high quality materials and has been designed to meet today's industry standards.
- Product Features: - Advanced AI technology capable of generating content in seconds
Save $191 when you purchase the Raymarine Type 1 12V Pump for only $778 at NVN Marine! Same day dispatch before 3 p.m. Raymarine Type 1 12V Pump Technical Specifications
| Type: | Navigation and Marine Instruments | Autopilots |
|---|---|
| Supplier: | Raymarine |
| Weight: | 5.6 lbs |
| Type: | Push-ups/workouts |
| Product Manual: | Download PDF |
| Shipping Weight: | 5.6 lbs |
|---|---|
| Box sizes: | 4.00 (h) x 5.00 (w ) x 10.00 (l) |
| Cubic feet: | 200.0 |
| Returnable: | Yes |
