Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base Sailing

C-Cleat Cam Cleat - Medium - Red with Black Base

Rope diameter from 3 to 12 mm (1/8" - 1/2")

>Intensive development efforts have produced this range of cleats that offer unbeatable holding power, whilst being designed to facilitate cleat and release of control lines in all applications and load conditions. Through the use of advanced composites, these crampons achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, lightweight and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the string. A multi-spiral spring embedded in the upper part of the cam generates an almost constant torque. This constant torque guarantees a secure cleat of even the smallest lines with minimal abrasion or wear to the cable and low line entry and exit efforts. THEThe C-cleat's lightweight, ultra-stiff carbon fiber composite cams are corrosion-free, experience virtually no tooth wear, and are non-abrasive to the rope.

Features:

Advanced design, material selection and manufacturing methods combine to provide superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimize line entry and release effort
Carbon fiber composite cam material provides maximum strength heat and abrasion resistance
Unique self-cleaning and self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads

Applications:
Range of cleats for all requirements including command lines, listening tojib and mainsheet cleat

Materials:

Carbon fiber composite cams
Long strand fiberglass reinforced polymer base
PTFE impregnated acetal slot bearing
Stainless steel multi-turn spring

The carbon fiber C cleat cam can be attached to up to 1/2 inch line in a strong, lightweight cleat. Ronstan has invested a lot of time and energy into designing cam nails that provide maximum grip, easy release and superior durability. The anti-slip cam pad is made of high quality fiber composite material, the base is made of a long fiberglass reinforced polymer base beam, with self-lubricating acetal slotted bearings and stainless steel springs multi-coil to ensure that there is no rust and rust. The crampons canmaintain their resistance for many years. The size of the cleats is 2 5/8" long x 1 1/4" wide x 1" high. The mounting holes are spaced 1 1/2" apart and are screwed to the platform through the cam holes with 3/16 inch. Carbon fiber bindings. The composite cam material provides maximum resistance to heat and wear. The combination of design, material selection and advanced manufacturing methods can provide excellent strength and retention, light weight and corrosion resistance. Multi-coil spring in stainless steel. Acetal slotted bearing impregnated with PTFE. fiber reinforced polymer matrix. Carbon fiber composite cam. Maximum static load is 275 lbs, dynamic load is 550 lbs.
PRODUCT ID: 55243
SKU: NVN-55243
CSKU: CWR-55243
REWRITE: 66354-ronstan-c-cleat-cam-cleat-medium
MPN: RF5410R
UPC: 9316800450824
ASIN: B005O2PDEM
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base
NAME_EX: RONSTAN MEDIUM C-CLEAT CAM CLEAT RED WITH BLACK BASE
PTITLE: Ronstan C-Cleat Cam Cleat - Medium - Red with black base
TYPE: Sail | Hardware
SELLER: Ronstan
VEHICLES & PARTS> WATERCRAFT PARTS & ACCESSORIES

Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base (55243 )
Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base

Gtags:

GSpecs:

Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base Product Description C-Cleat Cam Cleat - Medium - Red with Black Base

3-12 mm (1/8" - 1/2") rope diameter

Intensive development efforts have produced this line of cleats that provide unbeatable holding power, whilst being designed for ease of cleat and release of control lines in all applications and load conditions. Through the use of advanced composites, these crampons achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, lightweight and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the string. A multi-spiral spring embedded in the upper part of the cam generates an almost constant torque. This constant torque guarantees a secure cleat of even the smallest lines with minimal abrasion or wear.re of the cable and low line entry and exit efforts. The lightweight, ultra-stiff carbon fiber composite cams of the C-cleat are corrosion-free and suffer from virIn reality, no tooth wear and no abrasive stringing.

Features:

Advanced design, material selection and manufacturing methods combine to provide superior strength and holding power. , lightness and corrosion resistance
Cam profile and multi-coil spring minimize line entry and release effort
Carbon fiber composite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning and self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads

Applications:
Range of cleats for allrequirements, including control lines, jib sheet and mainsheet cleat

Materials:

Composite made of carbon fiber cams
Long strand glass fiber reinforced polymer base
PTFE impregnated acetal split bearing
Stainless steel multi-coil spring

The carbon fiber C wedge cam can be attached to a line of up to 1/2 inch in a strong, lightweight cleat. Ronstan has invested a lot of time and energy into designing cam nails that provide maximum grip, easy release and superior durability. The anti-slip cam pad is made of high quality fiber composite material, the base is made of a long fiberglass reinforced polymer base beam, with self-lubricating acetal slotted bearings and stainless steel springs multiple spools to ensure that there are no partse Rust and rust. The crampons can maintain their strength for many years. The size of the cleats is 2 5/8" long x 1 1/4" wide x 1" high. The mounting holes are spaced 1 1/2" apart and are screwed to the platform through the cam holes with 3/16 inch. Carbon fiber bindings. The composite cam material provides maximum resistance to heat and wear. The combination of design, material selection and advanced manufacturing methods can provide excellent strength and retention, light weight and corrosion resistance. stainless steel line m.multi-helical spring. Acetal slotted bearing impregnated with PTFE. Long line fiberglass reinforced polymer matrix. Carbon fiber composite cam. Maximum static load is 275 lbs, dynamic load is 550 lbs.

Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base Related ProductsKiRonstan Cleat Cleat - Medium - Black
Ronstan Front Mounted Cleat Cable - Medium - Black

Frequently Asked Questions (FAQ) about the Ronstan Cam Cleat C-Cleat - Medium - Red with black base Who is the Ronstan?
How to describe the Ronstan C-Cleat cam cleat - Medium - Red with black base Black base?
What color is the Ronstan C -Cleat Cam Cleat - Medium - Red with black base?
Who is the Ronstan? The sailboat fittings market and the architectural rigging market are different worlds, but in Australia they are both dominated by one powerful player. Ronstan's end-to-end design, manufacturing and distribution operations have become the only serious competitor. Internationally, Ronstan is one of the three largest sailboat fittings brands in the world, instantly recognized and respected in 45 countries. How to Describe Ronstan C-Cleat Cam Cleat - Medium - Red with bblack ase? The carbon fiber C wedge cam can be attached to up to 1/2 inch line in a strong, lightweight wedge. Ronstan has invested a lot of time and energy into designing cam nails that provide maximum grip, easy release and superior durability. The anti-slip cam pad is made of high quality fiber composite material, the base is made of a long fiberglass reinforced polymer base beam, with self-lubricating acetal slotted bearings and stainless steel springs multi-coil to ensure that there is no rust and rust. The crampons can maintain their strength for many years. The size of the cleats is 2 5/8" long x 1 1/4" wide x 1" high. The mounting holes are spaced 1 1/2" apart and are screwed to the platform through the cam holes with 3/16 inch. Carbon fiber bindings. The composite material of the caoffers me maximum warmth.t resistance and resistance to wear. The combination of design, material selection and advanced manufacturing methods can provide excellent strength and retention, light weight and corrosion resistance. Fits 1/8" to 1/2" lines. Multi-coil spring in stainless steel. Acetal slotted bearing impregnated with PTFE. Long line fiberglass reinforced polymer matrix. Carbon fiber composite cam. Maximum static load is 275 lbs, dynamic load is 550 lbs. What is the color of the Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base? Black/Red

Save $5 when you purchase the Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base for only $28 at NVN Marine! Same day dispatch before 3 p.m. Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base Technical Specifications

Type :	Sail \| Material
Supplier:	Ronstan
WeiWeight:	0.1 lb
Color:	Black/Red

Ronstan C-Cleat Cam Cleat - Medium - Red with Black Base User ReviewsRonstan C-Cleat Cam Cleat - Medium - Red with Black Base Shipping and return

Shipping weight:	0.1 lb
Box sizes:	1.00 (h) x 1.00 (w) x 3.00 (w)
Cubic feet:	3.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our Return and Refund Policy here.