Ronstan Medium Alloy Cam Wedge - Red Black Base Sailing

Medium Alloy Cam Cleat - Red and Black Base

Features:

Hot Forged and hard anodized cams for maximum resistance to wear and corrosion
Low effort line entry and exit thanks to unique teeth, line entry geometry and smooth finish
Unique self-cleaning and self-lubricating slotted bearings ensure consistent high performance, even when subjected to high static loads
Superior resistance to sand and salt
>Multi-coil spring generates near constant torque Easy entry/release and secure cleat, even of the smallest diameter lines
Suitable for adding to swivel cleat bases for lines and check sheets.
Small cleat features aluminum cams and a composite base for maximum durability and lightweight.
Mediumthe cleat has an aluminum base and cams for maximum rigidity

Designed for performance
Intensive development efforts have produced this range of cleats high-performance cam release that provides unbeatable holding power while allowing easy cleat and release of lines and check sheets.

Alloy Cleats™
Cam Models Aluminum panels designed for ultimate durability when high wear and high loads are encountered. Cams are hot forged and hard anodized for maximum strength and corrosion resistance. Ronstan Alloy Cleat™ models are available in small and medium sizes. The medium cleat is built on an aluminum base for maximum rigidity while the small cleat has a composite base for an optimal blend of lightweight and durability.

Slotted bearings
Self-lubricating, BearingsSelf-cleaning slots provide lower friction resistance, faster response times and greater resistance to sand and salt than ball bearings which can deform under load.

Multi-coil spring
The multi-spiral spring embedded in the upper part of the cam generates an almost constant torque. This consistency ensures a secure cleat on even the smallest lines with minimal rope abrasion or wear.

Unique teeth and entry profiles
Line entry and exit at low effort thanks to unique teeth and entry geometry.

Advanced composite base
The small wedge has a base produced from long fiber reinforced polymer to save weight while providing essential rigidity.

Customization
A full range of specialized cleat accessories allows customization of the configuration ofshims to optimize performance by controlling inward feed, outward feed, cleat and release angle and height.

Total controlSwivel cleat bases further enhance the function of the cleats by providing articulation and, on some models, adjustment of the angle and direction of the cleat (cleat up or down) to allow control of lines and sheets from different positions on the boat.

Materials:

Hard anodized aluminum cams
Constructed on a hard anodized aluminum base

Specifications:

Rope: 1/8 - 1/2 in .
Height: 1 in.
Width: 1-1/4 in.
Length: 2-5/8 in.
Closure: 3/16 in.
Mounting hole centers: 1-1/2 in.
M.W.L: 275 lb.
B.L: 550 lbs
Weight: 2.5 oz.

Cam bracemedium alloy-red, black basic features: hot forged and hard anodized cam, with maximum wear and corrosion resistance thanks to the unique teeth, wire entry geometry and smooth surface allows the wire to enter and exit. The unique labor-saving self-cleaning and self-lubricating slotted bearings can ensure consistent high performance even under high static loads. Excellent resistance to sand and salt. Multi-coil springs produce almost constant torque. Easy to enter/release, even the smallest diameter pipeline can be firmly fixed. The small anti-slip plate features an aluminum cam and composite base for maximum durability and light weight. Medium-sized anti-slip plate in aluminum with base and cam to achieve maximum rigidity. Built for performance. After extensive development work, the plate seriesHigh-performance cam grips provide unrivaled grip, while also being easy to use for unlocking and unlocking the control line and control panel. The aluminum alloy lug cam model has extremely high durability under high wear and load. The cam is hot forged and hard anodized to achieve maximum strength and corrosion resistance. Ronstan alloy crampon models are available in small and medium sizes. The medium anti-slip board is built on an aluminum base to achieve maximum rigidity, while the small anti-slip board has a composite base to achieve the best combination of lightness and durability. Slotted bearings are self-lubricating. Compared to ball bearings which deform under load, slotted bearings have lower friction resistance, faster response timeand better resistance to sand and salt. Multi-Coil Spring The multi-coil spring embedded in the upper cam art generates almost constant torque. This consistency ensures that even the smallest cords can be safely cracked with minimal wear or abrasion to the cable. Unique tooth and inlet profile Thanks to unique tooth and inlet geometry, labor-saving pipeline inlet and outlet. Advanced composite material base The base of the small non-slip shoe is made of long fiber reinforced polymer to reduce weight while providing the necessary rigidity. A wide range of professional custom cleat accessories allow custom cleat adjustments to optimize performance by controlling inward advance, outward advance, travel and travel angle and height. The base of the Total Contro Swivel Guard Platel further improves the hinge function of the guard plate and sets a fixed angle and direction (fixed up or down) on some models, so that lines and plates can be controlled from different positions on the ship. Material: Hard anodized aluminum cam, based on a hard anodized aluminum base. Specifications: Rope: 1/8-1/2 in. Height: 1 in. Width: 1-1/4 in. Length: 2-5/8 in. Fasteners: 3/16 in. Center of mounting hole: 1-1/2 in. MWL: 275 lbs. Weight: 550 pounds Weight: 2.5 ounces Specifications: Color: Black/Red Packaging Box Size: 2" H x 2" W x 3" W WEIGHT: 0.2 pounds UPC: 9316800530052
PRODUCT ID : 78306
SKU: NVN -78306
CSKU: CWR-78306
REWRITE: 89417-ronstan-medium-alloy-cam-cleat-red
MPN: RF5510R
UPC: 9316800530052
ASIN: B08C21CL38
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Ronstan Medium Alloy Cam Shim - Ro Baseuge, black
NAME_EX: RONSTAN MEDIUM ALLOY CAM RED CLEANER, BLACK BASE
PTITLE: Ronstan Medium Alloy Cam Cleat - Red Base, Black
TYPE: Sailing equipment
SELLER: Ronstan
br> VEHICLES & PARTS> WATERCRAFT PARTS & ACCESSORIES
Sports
Ronstan Medium Alloy Cam Cleat - Red, Black Base
Ronstan Medium Alloy Cam Cleat
Sports
Gtags:

G Specs:

Ronstan Medium Alloy Cam Cleat - Red and Black Base Product Description

Medium Alloy Cam Cleat - Red and Black Base

Features:

Hot forged and hard anodized cams for maximum resistance to wear and corrosion.
Low effort line entry and exit thanks to unique teeth, line entry geometry and smooth finish
Unique self-cleaning and self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads.
Superior resistance to sand and salt
Multi-coil spring generates near constant torque Easy entry/release and secure cleat of even smaller diameter lines
Suitable for be added to swivel cleat bases for control lines and sheets
Small cleat features aluminum cams and ua composite base for maximum durability and lightness
The medium cleat has an aluminum base and cams for maximum rigidity

Designed for performance
Intensive developmentOpment's efforts have produced this range of high performance cam cleats which offer unbeatable holding power while allowing easy cleat and release of lines and control sheets.

Alloy Cleats™
Aluminum cam designs constructed for ultimate durability where high wear and loads are encountered. Cams are hot forged and hard anodized for maximum strength and corrosion resistance. Ronstan Alloy Cleat™ models are available in small and medium sizes. The medium cleat is built on an aluminum base for maximum rigidity while the small cleat has a composite base for an optimal blend of lightweight and durability.

Slotted Bearings
Self-lubricating, Self-cleaning slotted bearings provide lower friction resistance, faster response times and greater resistance to sand and salt than standard bearings ball which can deform under load.

Multi-coil spring
The multi-coil spring embedded in the upper part of the cam generates almost constant torque. This consistency ensures a secure cleat of even the smallest lines with minimal abrasion or wear to the rope.

Unique teeth and entry profiles
Entrance and Low effort line exit thanks to unique teeth and entry geometry.

Advanced composite base
The small wedge has a base produced from long fiber reinforced polymer to save weight while providing essential rigidity.

Personalization
A complete range of accessoriesSpecialized shims allow you to customize the shim configuration to optimize performance by controlling the inward advance, the outward advance, the angle and the height of wedging and unlocking.

Total Control
Swivel cleat bases further enhance the function of the cleats by providing articulation and, with some models, adjustment of the angle and direction of the cleat (cleat towards up or down) to allow control of lines and sheets from different positions on the boat.

Materials:

Hard anodized Aluminum cams
Built on a hard anodized aluminum base

Specifications:

Rope: 1/8 - 1/2 in.
Height: 1 in.
Width: 1-1/4 in.
Length: 2-5/8 in.
Fixture: 3/16 in.
Mounting Hole Centers: 1-1/2 in.
M.W.L: 275 lbs.
B.L: 550 lbs
Weight: 2.5 oz.

Medium Alloy Cam Brace-Red, Black Basic Features: Hot forged and hard anodized cam, with maximum resistance to wear and corrosion thanks to the unique teeth, wire entry geometry and smooth surface allow wire to move in and out Slotted bearings Unique labor-saving self-cleaning and self-lubricating coatings can ensure consistent high performance even under high static loads. Excellent resistance to sand and salt. Multi-coil springs produce almost constant torque. Easy to enter/release, even the smallest diameter pipeline can be firmly fixed. The small anti-slip plate features an aluminum cam and composite base for maximum durability and lightweight. The medium-sized anti-slip plate features an aluminum base and cam to achieve maximum rigidity.Built for performance. After extensive development work, the high-performance cam anti-slip plate series provides unrivaled grip, while also being easy to use for unlocking and unlocking the control line and control panel. The aluminum alloy lug cam model has extremely high durability under high wear and load. The cam is hot forged and hard anodized to achieve maximum strength and corrosion resistance. Ronstan alloy crampon models are available in small and medium sizes. The medium anti-slip board is built on an aluminum base to achieve maximum rigidity, while the small anti-slip board has a composite base to achieve the best combination of lightness and durability. Slotted bearings are self-lubricating. Compared to ball bearings which deform under load, bearingsslotted ts have lower friction resistance, faster response time and better resistance to sand and salt.ance. Multi-coil spring The multi-coil spring embedded in the upper part of the cam generates an almost constant torque. This consistency ensures that even the smallest cords can be safely cracked with minimal wear or abrasion to the cable. Unique tooth and inlet profile Thanks to unique tooth and inlet geometry, labor-saving pipeline inlet and outlet. Advanced composite material base The base of the small non-slip shoe is made of long fiber reinforced polymer to reduce weight while providing the necessary rigidity. A wide range of professional custom cleat accessories allow personalized cleat adjustments to optimize performance by controlling inward feed, outward feed, angle and height of thetravel and travel. The Total Control Swivel Skid Plate Base further enhances the articulation function of the skid plate and sets a fixed angle and direction (fixed up or down) on some models, so the lines and the plates can be controlled from different positions on the vessel. Material: Hard anodized aluminum.Aluminum cam, based on hard anodized aluminum base Specifications: Chord: 1/8-1/2 in. Height: 1 in. Width: 1-1/4 in. Length: 2-5/8 in. Fasteners: 3/16 inch mounting hole center: 1-1/2 inch MWL: 275 lbs. Weight: 550 pounds Weight: 2.5 ounces Specifications: Color: Black/Red Packaging Box Size: 2" H x 2" W x 3" W WEIGHT: 0.2 pounds UPC: 9316800530052

Frequently Asked Questions (FAQ) about Ronstan Medium Alloy Cam Cleat - Red Base, Black Base Who is the Ronstan?
How to describe the cam cleat. cRonstan medium alloy core - red and black base?
What is it? the color of the Ronstan Medium Alloy cam cleat - Red, black base?
Who is the Ronstan? The sailboat hardware market and the architectural rigging market are worlds apart, but in Australia they are both dominated by one powerful player. b>Ronstan's end-to-end design, manufacturing and distribution operations have become the only serious competitor internationally, Ronstan is one of the top three. The world's sailboat fittings brands, instantly recognized and respected in 45 countries. How to describe the Ronstan Medium Alloy Cam Cleat - Red Base, Black? Medium-Red, Black Alloy Cam Splint Basic Features: Hot drop forged and hard anodized cam, with maximum wear and corrosion resistance due to unique teeth, wire entry geometry and surface smooth allowsu thread to enter and exit. The economical, unique, self-cleaning and self-lubricating slotted bearings can ensure high and consistent performance even under high static loads. Excellent resistance to sand and salt. Multi-coil springs produce almost constant torque. Easy to enter/release, even the smallest diameter pipeline can be firmly fixed. The small anti-slip plate features an aluminum cam and composite base for maximum durability and light weight. The medium-sized anti-slip plate features an aluminum base and cam to achieve maximum rigidity. Built for performance. After extensive development work, The cam's high-performance anti-slip plate series provides unrivaled grip, while also being easy to use for triggering and triggering the control line and control board. The cam model with studs inAluminum alloy exhibits extremely high durability under high wear and load. The cam is hot forged and hard anodized to achieve maximum strength and corrosion resistance. Ronstan alloy crampon models are available in small and medium sizes. The medium anti-slip board is built on an aluminum base to achieve maximum rigidity, while the small anti-slip board has a composite base to achieve the best combination of lightness and durability. Slotted bearings are self-lubricating. Compared to ball bearings which deform under load, slotted bearings have lower friction resistance, faster response time and better resistance to sand and salt. Multi-coil spring The multi-coil spring embedded in the upper part of the cam generates an almost constant torque. This consistency ensures that even the smallest cordOns can be cracked safely with minimal risk. Normal wear or abrasion of the rope. Unique tooth and inlet profile Thanks to unique tooth and inlet geometry, labor-saving pipeline inlet and outlet. Advanced composite material base The base of the small non-slip shoe is made of long fiber reinforced polymer to reduce weight while providing the necessary rigidity. A wide range of professional custom cleat accessories allow custom cleat adjustments to optimize performance by controlling inward advance, outward advance, travel and travel angle and height. The Total Control Swivel Skid Plate Base further enhances the articulation function of the skid plate and sets a fixed angle and direction (fixed up or down) on some models, so the lines and the plates can be contRole-played from different positions on the ship. Material: Hard anodized aluminum cam, based on a hard anodized aluminum base. Specifications: Rope: 1/8-1/2 in. Height: 1 in. Width: 1-1/4 in. Length: 2-5/8 in. Fasteners: 3/16 inch Fastener Hole Center: 1-1/2 inch MWL: 275 lbs. Weight: 550 lbs Weight: 2.5 ounces Specifications: Color: Black/Red Package Box Size: 2 "H x 2" W x 3" L WEIGHT: 0.2 lbs UPC: 9316800530052What color is the Ronstan Medium Alloy Cam Cleat - Red and Black Base? Black/Red

$15

Ronstan Medium Alloy Cam Cleat - Red, Black Base

$24