Ronstan series 30 ball bearing block single becket lashing option Sailing

30 Series Ball Bearing Block, Single Ring Tie Down Option

Ball Bearing Blocks™ offer the highest strength-to-weight ratio available. This is achieved through fully composite reinforced polymer materials and multiple fixing options. Their precise design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fiber reinforced composites in the block head, cleat arms and beckets.

Highest workload in its class

Proven Ronstan 2-stage bearing system (30 series and above) features ball bearings high quality acetal compression and a full contact secondary bearing. This achieves minimum friction over the entire working load range.

The pulley and bearing system is supported by a frame of cfiber reinforced harge, computer modeled and optimized using advanced stress analysis methods. Dyneema Link, used in multi-sheave pulleys, is produced from high specification SK75 fiber, which is 10 times stronger and lighter than steel, and provides the final connection of the block to the load point.

Simple, versatile and secure attachment

The unique block attaches easily to an attachment point and can also accept Dyneema links and shackles for a variety of effective fastening alternatives. The Dyneema Link used in multi-sheave pulleys is easily mounted and secured with a removable pin. The Dyneema Link can also be removed and replaced with a shackle, custom lashing or strop.

These pulleys are much more compatible with Dyneema/Spectra lines, the laminate connection points of carbon and straps than traditional pulleyswith steel loop tops or shackles.

Low, compact profile

Bi-directional head of unique tie down block allows alignment at one orientation of 0° or 90°, while the unique swivel block allows full articulation.

The flexible Dyneema link used in multi-sheave pulleys provides 0° or 90° orientation. It connects directly to the head of the block rather than to an intermediate head post. This reduces weight and gives the lowest possible profile while still allowing full articulation. The Beckets have been carefully designed to minimize height.

Features:

Lightweight
Lightest working load best in its class
Safe, versatile and secure attachment
Low and compact profile
Ultra low profile through-sheave ring
Self-lubricating Nylatron sheave and full contact bearing for high dynamic loads

Applications:

Mainsheet systems and spinnaker sheets on dinghies up to 5M(16')
Halyard, vang and backstay applications on boats up to 5M(16')
Control line applications on larger yachts

The maximum wire diameter of RF35109HL is 8 mm, the maximum working load is 1,210 pounds, the breaking load is 3,630 pounds, and the weight is only 42 grams. The high load pulley and raceway are made of stainless steel; the cheeks are made of fiberglass reinforced nylon. The breaking load depends on the strength of the lashing passing through the central hub. The hub can also serve as Baker's takeoff point.
PRODUCT ID: 80102
SKU: NVN-80102
CSKU: CWR-80102
REWRITE: 91213-ronstan-series-30-ball- single bearing block
MPN: RF35109HL
UPC: 9316800593286
ASIN: B07Y5HCPY6
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Ronstan Series 30 Single Becket Ball Bearing Block Tie Down Option
NAME_EX: RONSTAN 30 SERIES OPTION BB BLOCK SINGLE BECKET STOP
PTITLE : Ronstan 30 Series Ball Bearing Block, Single Ring Tie Down Option
TYPE: Sail | Blocks
SELLER: Ronstan
VEHICLES and PARTS> VEHICLE PARTS AND ACCESSORIES> WATERCRAFT PARTS AND ACCESSORIES> SAILBOAT PARTS
Sports
Lashing Block high load Ronstan 30 Series
Ronstan 30 Series, Ball Bearing Block, Single Ring Option, Tie Down RF35109HL
Sports
Gtags:

Ronstan

GSpecs:

Ronstan Series 30, Ball Bearing Block, Single Becket Tie Down Option Product Description

Series 30 Ball Bearing Block, Single Becket Tie Down Option

Ball bearing blocks™ offer the highest strength-to-weight ratio available. This is achieved through fully composite reinforced polymer materials and multiple fixing options. Their precise design provides the optimum number of ball bearings for minimum friction while weight reduction is achieved through the use of fiber reinforced composites in the block head, cleat arms and beckets.

Highest workload in its class

Proven Ronstan 2-stage bearing system (30 series and above) features ball bearings high quality acetal compression and a full contact secondary bearing. This makes it possible to obtain minimum friction onr entire working load range.

The pulley and bearing system is supported by a fiber-reinforced load frame, computer modeled and optimized using advanced load analysis methods. constraints.The Dyneema Link, used in multi-sheave pulleys, is produced from high quality SK75 fiber, 10 times stronger and lighter than steel, and provides the final connection between the pulley and the point of charge.

Simple, versatile and secure attachment

These blocks are much more compatible with D linesyneema/Spectra, carbon laminate connection points and straps than traditional pulleys with steel loop tops or shackles.

Low and compact profile

The bi-directional head of the unique tie-down block allows alignment at 0° or 90° orientation, while the unique swivel block allows for complete articulation.

The flexible Dyneema link used in multi-sheave pulleys allows orientation at 0° or 90°. It connects directly to the head of the block rather than to an intermediate head post. This reduces weight and gives the lowest possible profile while still allowing full articulation. The Beckets have been carefully designed to minimize height.

Features:

Lightweight
Lightest working load best in its class
Safe, versatile and secure attachment
Low and compact profile
Ultra low profile through-sheave rings
Self-lubricating Nylatron sheave and full contact bearing for high dynamic loads

Applications:

Mainsheet and spinnaker sheet systems on dinghies up to 5M(16')
Halyard, downhaul and backstay applications on boats up to 5M(16') )
Control line applications on larger yachts

The maximum wire diameter of the RF35109HL is 8mm, the maximum working load is 1,210 pounds, the breaking load is 3630 pounds, and the weight is only 42 grams. The high-load pulley and raceway are made of stainless steel; the cheeks are made of fiberglass reinforced nylon. The breaking load depends on the strength of the lashing passing through the central hub. The hub can also serve as Baker's takeoff point.

Frequently asked questions (FAQ) about the Ronstan 30 series ball bearing block, rear optionsingle becket image Who is the Ronstan?
How to describe the Ronstan Series 30 Ball bearing block, single ring lashing option?
Who is the Ronstan? The sailboat fittings market and the architectural rigging market are different worlds, but in Australia they are both dominated by one powerful player. Ronstan's end-to-end design, manufacturing and distribution operations have become the only serious competitor. Internationally, Ronstan is one of the three largest sailboat hardware brands in the world, instantly recognized and respected in 45 countries.o describe the Ronstan Series 30 ball bearing block , single ring tie down option? The maximum wire diameter of RF35109HL is 8mm, the maximum working load is 1,210 pounds, the breaking load is 3,630 pounds, and the weight is only 42 grams. The high load pulley and raceway are made of stainless steeloxidizable; the cheeks are made of fiberglass reinforced nylon. The breaking load depends on the strength of the lashing passing through the central hub. The hub can also serve as Baker's takeoff point.

Save $18 when you purchase the Ronstan 30 Series Ball Bearing Block, Single Becket Tie Down Option for only $104at NVN Marin! Same day dispatch before 3 p.m. Ronstan Series 30 Ball Bearing Block, Single Becket Tie Down Option Technical Specifications

Type:	Sail \| Blocks
Seller:	Ronstan
Weight:	0.1 lbs

Ronstan 30 Series Ball Bearing Block, Single Becket Option, lashing User ReviewsRonstan 30 Series, Ball Bearing Block, Single Becket Option, Lashing Shipping & Returns

Shipping Weight:	0 .1 lb
Box sizes:	1.00 (h) x 2.00 (w) x 4.00 (w)
Cubic feet:	8.0
Returnable:	Yes
USPS First Class:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our Return and Refund Policy here. p>