Ronstan Small Alloy Cam Cleat - Red Black Base Sailing

Small Alloy Cam Cleat - Red and Black Base

Features:

Hot Forged and hard anodized cams for maximum resistance to wear and corrosion
Low effort line entry and exit thanks to unique teeth, line entry geometry and smooth finish
Unique self-cleaning and self-lubricating slotted bearings ensure consistent high performance, even when subjected to high static loads
Superior resistance to sand and salt
>Multi-coil spring generates near constant torque Easy entry/release and secure cleat, even of the smallest diameter lines
Suitable for adding to swivel cleat bases for lines and check sheets.
Small cleat features aluminum cams and a composite base for maximum durability and lightweight.
Mediumthe cleat has an aluminum base and cams for maximum rigidity

Designed for performance
Intensive development efforts have produced this range of high cam cleats performanceThe hat provides unbeatable holding power while allowing easy cleat and release of control lines and sheets.

Alloy Cleats™
Designed aluminum cam models for ultimate durability where high wear and loads are important. encountered. Cams are hot forged and hard anodized for maximum strength and corrosion resistance. Ronstan Alloy Cleat™ models are available in small and medium sizes. The medium cleat is built on an aluminum base for maximum rigidity while the small cleat has a composite base for an optimal blend of lightweight and durability.

Slotted bearings
Self-lubricating, BearingsSelf-cleaning slotted bearings provide lower friction resistance, faster response times and greater resistance to sand and salt than ball bearings which can deform under load.

Multi spring -coils
The multi-spiral spring embedded in the upper part of the cam generates an almost constant torque. This consistency ensures a secure cleat of even the smallest lines with minimal rope abrasion or wear.

Unique teeth and entry profiles
Entry and exit of the low effort line thanks to unique teeth and entry geometry.

Advanced composite base
Small wedges have a base produced from fiber reinforced polymer long to save weight while providing essential rigidity.

Customization
A full range of specialized cleat accessories allows for customizationr wedge configuration to optimize performance by controlling inward feed, outward feed, cleat and release angle and height.

Total control
Swivel cleat bases further enhance cleat function by providing articulation and, on some models, adjustment of cleat angle and direction (cleat up or down). ) to allow control of lines and sheets from different positions on the boat.

Materials:

Hard anodized aluminum cams
Constructed on a hard anodized aluminum base

Specifications:

Rope: 3/32 - 5/16 in.
Height: 3/4 in.
Width: 1 in.
Length: 1-7/8 in.
Closure: 5/32 in.
Mounting hole centers: 1-1/16 in.
M.W.L: 165 lb.
B.L: 330 lb
Weight: 0.9 oz.

Aluminum Alloy Anti-Slip Cam for Shopping Mall, Matte Red, Black Basic Features: Hot forged and hard anodized cam, with maximum wear and corrosion resistance thanks to unique teeth, high geometry 'Wire entry and smooth finish, allowing the wire to enter with the unique self-cleaning and self-lubricating slot bearing, labor-saving and exiting, it can ensure high and consistent performance even under high static load , and it is more resistant to sand and salt. Multi-coil springs produce almost constant torque. Easy to enter/release, even the smallest diameter wire can be firmly fixed, and it can even be used for control wire and rotating wire clamp base. Sheets Mall cleats have aluminum cams and composite bases to achieve maximum durability and lightness. Medium cleats have aluminum bases and cams to obtachieve maximum rigidity. Built for performance. Continuous efforts have been developed to develop this high-performance anti-slip mat can provide unparalleled holding power, and it is also easy to operate the unlocking and unlocking of the control line and control board. The aluminum alloy lug cam model has extremely high durability under high wear and load. The cam is hot forged and hard anodized to achieve maximum strength and corrosion resistance. Ronstan alloy crampon models are available in small and medium sizes. The medium skid board is built on an aluminum base to achieve maximum rigidity, while the small skid board uses a composite base to achieve the best combination of light weight and durability. Compared to a ball bearing which deforms under load, a self-slotted bearinglubricant and self-cleaning features lower friction resistance, faster response time and bet.ter resistance to sand and salt. Multi-coil spring The multi-coil spring embedded in the upper part of the cam generates an almost constant torque. This consistency ensures that even the smallest cords can be safely cracked with minimal wear or abrasion to the cable. Unique tooth and inlet profile Thanks to unique tooth and inlet geometry, labor-saving pipeline inlet and outlet. The base of the Advanced Composite Base mall cleats is made from long fiber reinforced polymer to reduce weight while providing the necessary rigidity. A wide variety of professional custom cleat accessories allow personalized cleat adjustments to optimize performance by controlling inwards feeds, outboard feeds, anglesand fixed and non-fixed heights. The Total Control rotating wedge base further enhances the hinged function of the wedge and sets the angle and direction of the wedge (upper and lower wedges) on some models, so that lines and sheets from different positions on the vessel can be controlled. Material: Hard Anodized Aluminum Cam is based on hard anodized aluminum. Basic specifications: Rope: 3/32-5/16 inches. Height: 3/4 inches. Width: 1 inch. Length: 1-7/8 inches. Fastener: 5/32 inch Center of mounting hole: 1-1/16 inch MWL: 165 lbs. Weight: 330 pounds Weight: 0.9 ounces Specifications: Color: Black/Red Packaging Box Size: 1" H x 2" W x 4" W WEIGHT: 0.5 pounds UPC: 9316800532612
PRODUCT ID : 78305
SKU: NVN -78305
CSKU: CWR-78305
REWRITE: 89416-ronstan-small-alloy-cam-cleat-red
MPN: RF5500R
UPC: 9316800532612
ASIN: B08C1WMN8B
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Ronstan Small Alloy Cam Cleat - Red, Black Base
NAME_EX: RONSTAN SMALL ALLOY CAM CLEAT RED, BLACK BASE
PTITLE: Ronstan Small Alloy Cam Cleat - Base red, black
TYPE: Sailing Equipment
SELLER: Ronstan
VEHICLES & PARTS> WATERCRAFT PARTS & ACCESSORIES
Sports
Alloy Cam Cleat Ronstan Small - Red and Black Base
Ronstan Small Alloy Cam Cleat Red, Black Base by Hodges Marine
Sports
Gtags:

GSpecs:

Ronstan Small Alloy Cam Cleat - Red and Black Base Product Description

Small Alloy Cam Cleat - Red and Black Base

Features:

Hot forged and hard anodized cams for maximum resistance to wear and corrosion.
Low effort line entry and exit thanks to unique teeth, line entry geometry and smooth finish
Unique self-cleaning and self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads.
Superior resistance to sand and salt
Multi-coil spring generates near constant torque Easy entry/release and secure cleat of even smaller diameter lines
Suitable for be added to swivel cleat bases for control lines and sheets
Small cleat features aluminum cams and une composite base for maximum durability and lightness
The medium cleat has an aluminum base and cams for maximum rigidity

Designed for performance
Intensive DevelopmentAll our efforts have produced this range of high performance cam cleats which offer unbeatable holding power while allowing easy cleat and release of lines and check sheets.

Alloy Cleats™
Aluminum cam models constructed for ultimate durability where high wear and loads are encountered. Cams are hot forged and hard anodized for maximum strength and corrosion resistance. Ronstan Alloy Cleat™ models are available in small and medium sizes. The medium cleat is built on an aluminum base for maximum rigidity while the small cleat has a composite base for an optimal blend of lightweight and durability.

Slotted Bearings
Self-lubricating, Self-cleaning slotted bearings offer lower friction resistance, faster response times and greater resistance to sand and salt than ball bearings which can be deform under load.

Multi-coil spring
The multi-coil spring embedded in the upper part of the cam generates disadvantages close to high torque. This consistency ensures a secure cleat of even the smallest lines with minimal abrasion or wear to the rope.

Unique teeth and entry profiles
Entrance and Low effort line exit thanks to unique teeth and entry geometry.

Advanced composite base
The small wedge has a base produced from long fiber reinforced polymer to save weight while providing essential rigidity.

Customization
A complete rangeSpecialized cleat accessories allow customization of cleat configuration to optimize performance by controlling inward feed, outward feed, wedge and release angle and height.

Total Control
Swivel cleat bases further enhance cleat function by providing articulation and, with some models, adjustment of cleat angle and direction (cleat up or down) to allow control of lines and sheets from different positions on the boat.

Materials:

Hard anodized aluminumium cams
Constructed on a hard anodized aluminum base

Specifications:

Rope: 3/32 - 5/16 in.
Height: 3/4 in.
Width: 1 in.
Length: 1-7/8 in.
Mounting: 5/32 in.
Mounting hole centers : 1-1/16 in.
M.W.L: 165 lbs
B.L: 330 lbs
Weight: 0.9 oz.

aluminum alloy anti-slip cam for shopping mall, matte red , black basic features: hot forged and hard anodized cam, with maximum wear and corrosion resistance thanks to unique teeth, wire entry geometry and smooth finish, allowing wire to enter . With the unique self-cleaning and self-lubricating slotted bearing, which is labor-saving and outgoing, it can guarantee consistent performance even under high static load, and it is more resistant to sand and salt. Multi-coil springs produce almost constant torque. Easy to enter/release, even the smallest diameter wire can be firmly fixed, and it can even be used for control wire and rotating wire.e clamping base. Sheets Mall cleats feature aluminum cams and composite bases to achieve durability and lightweight.maximum rety. Medium crampons have aluminum bases and cams to achieve maximum rigidity. Built for performance. Continuous efforts have been developed to develop this high-performance anti-slip mat can provide unparalleled holding power, and it is also easy to operate the unlocking and unlocking of the control line and control board. The aluminum alloy lug cam model has extremely high durability under high wear and load. The cam is hot forged and hard anodized to achieve maximum strength and corrosion resistance. Ronstan alloy crampon models are available in small and medium sizes. The medium skid board is built on an aluminum base to achieve maximum rigidity, while the small skid board uses a composite base to achieve the best combination of light weight and durability. CCompared to a ball bearing that deforms under load, a self-lubricating and self-cleaning slotted bearing has lower friction resistance, faster response time and better resistance to sand and salt. Multi-coil spring The multi-coil spring embedded in the upper part of the cam generates an almost constant torque. This consistency ensures that even the smallest cords can be safely cracked with minimal wear or abrasion to the cable. Unique tooth and inlet profile Thanks to unique tooth and inlet geometry, labor-saving pipeline inlet and outlet. The base of the Advanced Composite Base mall cleats is made from long fiber reinforced polymer to reduce weight while providing the necessary rigidity. A wide variety of professional custom cleat accessories allow for personalized cleat adjustments to optimize performance.nces by controlling inward feeds, outward feeds, fixed and non-fixed angles and heights. The Total Control rotating wedge base further enhances the hinged function of the wedge, and sets the angle and direction of the wedge (upper and lower wedges) on some models, so that the lines and sheets positions from different positions on the ship can be controlled. Material: Hard Anodized Aluminum Cam is made from hard anodized aluminum. Basic specifications: Rope: 3/32-5/16 inches. Height: 3/4 inches. Width: 1 inch. Length: 1-7/8 inches. Fastener: 5/32 inch Center of mounting hole: 1-1/16 inch MWL: 165 lbs. Weight: 330 pounds Weight: 0.9 ounces Specifications: Color: Black/Red Packaging Box Size: 1" H x 2" W x 4" W WEIGHT: 0.5 pounds UPC: 9316800532612

Frequently asked questions (FAQ) about Ronstan Alloy Cam Cleats - Basered and black. Who is the Ronstan?
How to describe the Ronstan Alloy Cam Cleats - Red and Black Base?
What is it? the color of the Ronstan Small Alloy Cam Cleat - Red, Black Base?
Who is the Ronstan? The sailboat hardware market and the architectural rigging market are worlds apart, but in Australia they are both dominated by one powerful player. b>Ronstan's end-to-end design, manufacturing and distribution operations have grown to become the only serious competitor. Internationally, Ronstan is one of the three largest sailboat hardware brands in the world, instantly recognized and respected in 45 countries. How to describe the Ronstan Small Alloy Cam Cleat - Red and Black Base? Aluminum Alloy Anti-Slip Cam for Shopping Mall, Matte Red, Black Basic Features: Hot forged and hard anodized cam, with maximum strengthwear and corrosion resistant thanks to unique teeth, wire entry geometry and a smooth finish, allowing wire to enter. Cleaning and self-lubricating slotted bearing, which is labor-saving and outgoing, it can ensure high and consistent performance even under high static load, and it is more resistant to sand and salt. Multi-coil springs produce almost constant torque. Easy to enter/release, even the smallest diameter wire can be firmly fixed, and it can even be used for control wire and rotating wire clamp base. Sheets Mall crampons have aluminum cams and composite bases to achieve maximum durability and lightness.art. Medium crampons have aluminum bases and cams to achieve maximum rigidity. Built for performance. Continuous efforts have been made to develop this high performance anti-slip mat can provide powerfulunrivaled holding power, and it is also easy to operate the unlocking and unlocking from the control line and control panel. The aluminum alloy lug cam model has extremely high durability under high wear and load. The cam is hot forged and hard anodized to achieve maximum strength and corrosion resistance. Ronstan alloy crampon models are available in small and medium sizes. The medium skid board is built on an aluminum base to achieve maximum rigidity, while the small skid board uses a composite base to achieve the best combination of light weight and durability. Compared to a ball bearing which deforms under load, a self-lubricating and self-cleaning slotted bearing has lower friction resistance, faster response time and better resistance to sand and salt. Multi-coil spring The multi-turn spring embedded in the upper part of the cam generates an almost constant torque. This consistency ensures that even the smallest cords can be safely cracked with minimal wear or abrasion to the cable. Unique tooth and inlet profile Thanks to unique tooth and inlet geometry, labor-saving pipeline inlet and outlet. The base of the Advanced Composite Base mall cleats is made from long fiber reinforced polymer to reduce weight while providing the necessary rigidity. A wide variety of professional custom cleat accessories allow custom cleat adjustments to optimize performance by controlling inward feeds, outward feeds, fixed and non-fixed angles and heights. The Total Control rotating cleat base further enhances the articulating function of the cleat and sets the angle and direction of the cleatbilge (upper and lower bilges) on some models, so that lines and sheets from different positions on the vessel can be controlled. Material: Hard anodized aluminum cam is based on hard anodized aluminum. Basic specifications: Rope: 3/32-5/16 inches. Height: 3/4 inches. Width: 1 inch. Length: 1-7/8 inches. Fastener: 5/32 inch Center of mounting hole: 1-1/16 inch MWL: 165 lbs. Weight: 330 pounds Weight: 0.9 ounces Specifications: Color: Black/Red Package Box Size: 1" H x 2" W x 4" W WEIGHT: 0.5 pounds UPC: 9316800532612What color is the small Ronstan Alloy Cam Cleat - Red and Black Base ? Black/Red

Save $12 on the purchase of the Cam Cleat Ronstan Small Alloy Cam - Red, Black Basefor only $19 at NVN Marine Same Day Dispatch before 3:00 PM Ronstan Small Alloy Cam Cleat - Red and Black Base table> Type:

Sail | Material

Supplier:

Ronstan

Weight:

0.5 lbs

Color:

Black/Red

Small Ronstan Alloy Cam Cleat - Red and Black Base User ReviewsSmall Ronstan Alloy Cam Cleat - Red and Black Base Shipping & Returns