Rule 4" Inline Blower Marine Plumbing & Ventilation

Xylem offers a range of products and systems designed to effectively meet the demands and challenges of water and wastewater treatment. From smarter aeration to advanced filtration to chemical-free disinfection, Xylem experts evaluate different customer needs and help them find the right solutions for their application. With brands trusted for decades, Xylem offers hundreds of solutions backed by a comprehensive, integrated portfolio of services designed to ensure water and wastewater treatment equipment continues to perform optimally.

Rule 240 Attributes

Compatibility: 4 inch inside diameter vent pipe
Flow rate: 235 cubic feet per minute
Voltage rating: 13.6 volts
Rated current: 4.3 amps
Length: 106 inches
Width: 152 inches
Color: White

Rule 240 Features and Benefits

Expertly crafted from premium materials
Developed to provide consistent performance and reliability
Meets the highest quality standards
Built to meet your exact needs
Easy installation
One year limited warranty

Rule 240 Installation Instructions

rule-blower-data-sheet.pdf

Rule Inline Blower - 4" Ducting
Part Number: 240

Designed for efficient, high output operation, these fans feature our exclusive front and rear shaft seals and wear-resistant motor housings corrosion for long life. Compact and easy to install on any flat surface. Rule in-line fans offer higher airflow, lower amperage draw and quieter operation than standard blowers.rs standards.

Characteristics

Quiet operation
Low amperage draw
Duct fittings Slip-on inlet and outlet
Sealed motor shaft for moisture protection
Corrosion-resistant nickel-plated motor housing
IMCI (CE)
Complies with USCG 183.410: ignition protection

Applications:
Racing cars and helmet ventilation
Bus ventilation (engine and toilet vapors)
Prison van ventilation (cooling, air freshening)
Inflatable panels and mascots
Tanning booths
Building ventilation

Specifications

Approvals: CE
Dimensions (H x W x D): 102 x 152 x 106 (mm)
Electrical rating: 4.3 Amp
Flow rate (US gallons and literscains): 235 CFM open flow
Fuse size: 7 (amps)
Product inlet connection: 4" (102 mm) conduit )
Product outlet connection: 4" (102 mm) conduit
Voltage: 13.6 (Vdc)

This product can expose you to chemicals including STYRENE, which is known to the State of California to cause cancer. For more information,

These in-line bilge fans are designed for efficient, high-efficiency operation and provide ventilation for the bilge, engine compartment, kitchen and roof. They have our unique features...
PRODUCT ID: 31480
SKU: NVN-31480
CSKU: CWR-31480
REWRITE: 42591-rule-4-in-line-blower
MPN: 240
UPC: 042237085429
ASIN: B000O8D0IC
WSKU:
SSKU:
KSKU: X69240
GSKU:
MSKU:
LSKU: 29-240
br> br>NAME: Rule 4" Inline Blower
NAME_EX: RULE IN-LINE BILGE BLOWER 4"
PTITLE: Rule 4" In-Line Blower
TYPE: Marine Plumbing and Ventilation | Blowers & Heaters
br>SELLER: Rule
HOME & GARDEN> HOME APPLIANCES> AIR CONDITIONING> FANS> FANS
Automotive Parts & Accessories
New Rule Boat Accessories Bilge Blower-4 Inline RUL 240
Rule 4" Inline Blower
Automotive Parts and Accessories
Gtags:

Rule
Bathroom
Online

GSpecs:

Rule 4" In-Line Blower Product Description

Xylem offers a range of products and systems designed to effectively meet the demands and challenges of water and wastewater treatment. From smarter aeration to filtration advanced to chemical-free disinfection, Xylem experts evaluate customers' varied needs and help them find the right solutions for their application. With brands trusted for decades, Xylem offers hundreds of solutions backed by. a comprehensive, integrated portfolio of services designed to keep water and wastewater treatment equipment operating at its best.

Rule 240 Attributes

Compatibility: 4 inch ID vent pipe
Flow rate: 235 cubic feet per minute
Rated voltage: 13.6 volts
Rated Ampere: 4.3 A
Length: 106 inches
Width: 152 inches
Color: White

Rule 240 Features and Benefits

Expertly crafted from premium materials
Developed to provide consistent performance and reliability
Meets the highest quality standards
Designed to meet your exact requirements
Easy installation
One year limited warranty an

Rule 240 Installation Instructions

rule-blower-data-sheet.pdf

Rule In-Line Blower - 4" Duct
Part Number: 240

Designed for efficient, high output operation, these blowers feature our exclusive front and rear shaft seals and Corrosion-resistant motor housings for long lifeof life. Compact and easy to install on any flat surface, Rule in-line fans provide higher airflow. Lower amperage draw and quieter operation than standard fans. For international and US markets.

Features

High volume efficient airflow.flow rate
Quiet operation
Low amperage draw
Slip-on inlet and outlet conduit fittings
Motor shaft sealed for moisture protection
Corrosion-resistant nickel-plated motor housing
IMCI (CE)
Compliant to USCG 183.410: Protection against ignition

Applications:
Ventilation of racing cars and helmets
Ventilation of bus (engine and bathroom fumes)
Ventilation of prison vans (cooling, air freshening)
Go panelsinflatables and mascots
Tanning booths
Building ventilation

Specifications

Approvals: CE
Dimensions (H x W x D): 102 x 152 x 106 (mm)
Electrical specifications: 4.3 Amp
Flow rate (gallons and liters : 235 CFM open flow
Fuse size: 7 (amps)
Product Inlet connection: 4" (102 mm) conduit
Product outlet connection: 4" (102 mm) conduit
Voltage: 13.6 (VDC)

This product can expose you to chemicals including STYRENE, which is known to the State of California to cause cancer. For more information,

These in-line bilge fans are designed for efficient, high-efficiency operation and provide ventilation of the bilge, engine compartment, galley and roof. They have our characteristics aiques...

Rule 4" In-Line Blower Related ProductsBlue Sea 5060 AGC MDL Crimpable In-Line Fuse Holder
Blue Sea 5061 AGC/MDL Waterproof In-Line Fuse Holder
Blue Sea 5065 ATO/ATC Waterproof In-Line Fuse Holder

Frequently Asked Questions (FAQ) about Rule 4" In-Line Fan Who is the rule?
How to describe the Rule 4" in-line blower?
What is the warranty policy for the Rule 4" in-line blower?
What is the operating voltage of the product?
What is the type of product?
What are the dimensions and weight of the Rule 4" In-Line Blower?
What is the color of the Rule 4" In-Line Blower?
What is the mounting type of the product?
What are the dimensions of the product?
What is the compatibility of this product?
What is the pipeline of the product?
Who is the rule? In 1998, Rule was acquired by ITT Corporation and joined the family of companies.eprises Marine & Leisure. Rule is a global leader in submersible bilge pumps for the recreational boat and small commercial boat markets and a leading supplier of accessory products such as ventilation fans and winches. Look for the Rule name and Wave logo when you need the best in product performance and durability. How to describe the Rule 4" in-line bilge blower? These in-line bilge blowers are designed for efficient and high-output operation and ventilation of the bilge, engine compartment, galley and roof. They have our features unique... What is the warranty policy for the Rule 4" Inline Fan? One year

High volume efficient air flow
Quiet operation
Low amperage draw
Push-on inlet and outlet conduit fittings
Sealed motor shaft forhas moisture protection
Corrosion-resistant nickel-plated motor housing
IMCI (CE) certified
Complies with USCG 183.410 for ignition protection

What is the operating voltage of the product? 12What is the type of product? Motor BlowersWhat are the dimensions and weight of the Rule 4" inline fan? 152 inches (w) X (h) 4"? WhiteWhat is the mounting type of the product? OnlineWhat are the dimensions of the product? 4 1/8" length x 4" height x 6" width How compatible is this product? 4 inch inside diameter vent pipe How much is the product duct? 4"

Save $19 when you buy the Rule 4" Online Blower for only $39 from NVN Marine! Same day shipping before 3 p.m. Technical specifications of the ventiOnline Rule 4"

Type:	Marine Plumbing and Ventilation \| Blowers and Heaters
Provider:	Ruler
Weight:	1 .0 lb
Duct:	4"
Open Flow (CFM):	235 CFM
Volts:	13.6v
Product Manual:	Download PDF

Rule 4 In-Line Blower User Reviews"Rule 4 In-Line Blower" Shipping & Returns

Shipping Weight:	1.0 lb
Box sizes:	5.00 (h) x 5, 00 (l) x 6.00 (l)
Cubic feet:	150.0
Returnable:	Yes
P65:	Yes

To know the shipping conditionsion details, please see our Shipping Policy and you can find our Return Policy. and refund policy here.