Rule 500GPH standard bilge pump - 12V Marine Plumbing & Ventilation

Our new range of small bilge pumps offer the ultimate pumping performance, now more efficient than ever, providing full rated flow at just 12 volts instead of 13.6 volts.

20DA Rule Attributes

Type: Submersible
Voltage rating: 12V DC
Flow rate: 800 gallons per hour
Port type: 3/4 inch
Width: 2-7/8 inches
Height: 4 inches
With thermal overload protection: Yes

Rule 20DA Features and Benefits

Higher Flow – Optimized impeller provides greater flow at the same amperage.
Integrated thermal cut-off (TCO) provides additional protection for the pump and tank
Backflow Prevention – Non-Return Prevents water left in the drain from flowing back, keeping holds drier and cleaner.
Air Vents – Built into the body, they help prevent air blockage in the installationsDifficult plumbing lations
Provide direct or direct access. 90 degree ports to suit your installation
3 year limited warranty

Standard Bilge Pump 500 GPH - 12V

Customers talk about flow, they want water to come out of the bilge, and
quickly. Improved design and performance mean our next generation 500GPH pump will produce this flow at just 12V instead of 13.6V as previously required... more typical of on-board voltage supply.

Our new generation of Rule pumps include valve control and to do this, we have created a hidden vent to avoid the airlock. Under each strainer tab is a small hole that vents any air trapped in the pump housing, thus avoiding airlocks...and that's how we do it.

We have a true electromagnetic suppression (EMC). We have a built-in thermal cell that protects thepump and the ship when things get too hot.

We've redesigned the interior and exterior of our bilge pumps, starting with a blank slate. And we're just getting started

Features:

Non-automatic - used with a panel switch or Rule float switch
Submersible and ignition protected
High efficiency, low amperage motor
Stainless steel shaft
Includes check valve

This product can expose you to chemicals including 1,3-butadiene, known as State of California to cause cancer, birth defects, or other reproductive harm. harm. For more information,

Standard Rules Series bilge pumps have the longest life and highest pumping power highindustry, making it a world leader. Our bilge pumps provide excellent pumping results
PRODUCT ID: 64166
SKU: NVN-64166
CSKU: CWR-64166
REWRITE: 75277-rule-500gph-standard-bilge-pump -12v
MPN: 25DA
UPC: 042237104717
ASIN: B01LZ5HQ2W
WSKU:
SSKU:
KSKU: X6920DA
GSKU:
MSKU:
LSKU : 29-25DA
NAME: Rule 500 GPH Standard Bilge Pump - 12V
NAME_EX: RULE 500 GPH STANDARD BILGE PUMP - 12V
PTITLE: Rule 500GPH Standard Bilge Pump - 12V
TYPE: Plumbing and marine ventilation | Bilge Pumps
SELLER: Rule
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
Rule 500 GPH 25DA Standard Bilge Pump -500
br> Rule 500 GPH Standard Bilge Pump - 12V
Sports
Gtags:

GSpecs:

Rule 500GPH Standard Bilge Pump - 12V Product Description

Our new range of small bilge pumps offer ultimate pumping performance, now more efficient than ever, providing full rated flow at just 12 volts instead of 13, 6 volts.

20DA Rule Attributes

Type: Submersible
Rated voltage: 12V DC
Flow rate: 800 gallons per hour
Port Type: 3/4 inch
Width: 2-7/8 inch
Height: 4 inches
With thermal overload protection: Yes

Rule 20DA Features and Benefits

Higher Flow – Optimized turbine delivers greater flow at the same amperage
The integrated thermal cut-off (TCO) provides additional protection for thea pump and the container
Backflow prevention – Non-return prevents water from remaining in the dischargeBackflow, keeping bilges drier and cleaner.
Air vents – integrated into the body, help prevent air blockage in difficult plumbing installations
Offer straight or 90 degree ports to suit your installation
3 Year Limited Warranty

Standard Bilge Pump 500 GPH - 12V

Customers Talk About Flow , they want the water out of the hold, and
quickly. Improved design and performance mean our next generation 500GPH pump will produce this flow at just 12V instead of 13.6V as previously required... more typical of on-board voltage supply.

Our new generation of Rule pumps include valve control and to do this, we have created a hidden vent to avoid the airlock. Under each languageInside the strainer is a small hole that vents any trapped air in the pump housing, thus avoiding airlocks...and that's how we do it.

We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and container in the event of a low thickness. The gs become too hot.

We have redesigned the interior and exterior of our bilge pumps, starting with a blank page. And we're just getting started

Features:

Non-automatic - used with a panel switch or Rule float switch
Submersible and ignition protected
High efficiency, low amperage motor
Stainless steel shaft
Includes preventive backflow

This product can expose you to chemicals including 1,3-butadiene, known to the State by Californie to cause cancer, birth defects, or other reproductive harm. For more information,

Standard Rules Series bilge pumps have the longest life and highest pumping power high in the industry, making it a world leader. Our bilge pumps provide excellent pumping results

Rule 500GPH Standard Bilge Pump - 12V Related ProductsRule ECO-Switch Automatic Bilge Pump Switch
Rule-A-Matic Plus& #153; Float Switch
Rule-A-Matic Float Switch
Rule-A-Matic Float Switch with Fuse Holder
BoatLIFE Silicone Rubber Sealant Cartridge - Clear
BoatLIFE Silicone Rubber Sealant Cartridge - White
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - Clear
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - White

Frequently Asked Questions (FAQ) about Rule 500GPH Standard Bilge Pump - 12V Who is the Rule?
How to describe the Rule 500GPH Standard Bilge Pump - 12V?
What is the operating voltage of the product?
What is the operating voltage of the product?
What is the warranty policy for the Rule 500GPH Standard Bilge Pump - 12 V?
What is the product type?
br/> What is the Rule 500GPH Standard Bilge Pump - 12V Package Dimensions and Weight?
What is the amperage of the product?
What is the output size of the product?
What is the capacity of the product?
What is the working mode of the product, automatic?
What is the diameter of the product?
What is the working capacity of the product ( GPH)?
Who is the rule? In 1998, Rule was acquired by ITT Corporation and became part of the Marine & Leisure family of companies. Rule is a world leader in submersible bilge pumpsfor the recreational boat and small commercial boat markets and a leading supplier of accessory products such as ventilation fans and winches. Look for the Rule name and vague logo when you need the best product performance and durability. How to describe the Rule 500GPH Standard Bilge Pump - 12V? Rule Standard Series bilge pumps have the longest life and highest pumping power in the industry, making them a world leader. Our bilge pumps provide excellent pumping results. What is the operating voltage of the product? 12

Increased water flow without increasing amperage consumption
Thermal cut-off prevents damage to the pump and the boat if clogged by debris
Reduction of residual bilge water and resulting odors
Prevention of air pockets with horn ventsps of the pump
Simplified maintenance with threaded discharge and clip-on base

What is the operating voltage of the product? 24 VoltsWhat is the warranty policy for the Rule 500GPH Standard Bilge Pump - 12V? Three-year limited warranty; Contact manufacturer for detailsWhat is the product type? SubmersibleWhat is Rule 500GPH Standard Bilge Pump - 12V Package Dimensions and Weight? 2-7/8 inches (l) X 4 inches (h) X (w) inches and the weight is: 0.9 lbs. What is the amperage of the product? 1.7What is the output size of the product? 3/4"What is the capacity of the product? 800 gallons per hourWhat is the working mode of the product, automatic? Non-automaticWhat is the diameter of the product? 3/4 inchWhat is the working capacity of the product (GPH)? 500 GPH

Save $14 when you purchase the Rule 500GPH Standard Bilge Pump - 12V for only $28 from NVN Myrine! Same day dispatch before 3 p.m. Rule 500GPH Standard Bilge Pump - 12V Technical Specifications

Type:	Marine Plumbing & Ventilation \| Bilge pumps
Seller:	Rule
Weight:	0.8 lbs
Type:	Electric
Gallons per hour:	500 GPH
Operation:	Non-automatic
Output size:	3/4 "
Volts:	12v
Product Brochure:	Download PDF

Rule 500GPH Standard Bilge Pump - 12V User ReviewsBilge Pump standard Rule 500GPH - 12V Shipping & Returns

Shipping Weight:	0.8 lbs
Box sizes:	4.00 (h) x 7.00 (w) x 7.00 (w)
Cubic feet:	196.0
Returnable:	Yes
P65:	Yes

For detailed shipping policy, please view our Shipping Policy and you can find our Return and Refund Policy here.