Rule 800GPH Electronic Sensing Bilge Pump - 12V Marine Plumbing & Ventilation
800GPH Electronically Sensed Bilge Pump - 12VIn the new generation of electronically sensed bilge pumps, the 800GPH 12V S Series pump operates on the principle of impeller resistance. The pump will turn on every 2 1/2 minutes for approximately one second to detect the presence of water. If water is present, the pump will detect resistance and continue to run until all water is removed. After that, it will start checking for water again every 2 1/2 minutes.
Water is controlled between 1/8" and 3/8"!!! Great idea when energy savings are needed and as an added benefit no float switch is needed!
All this plus the added benefits of our standard bilge pump:
- Check valve included with hidden vent to prevent airlock
- True electromagnetic suppression (EMC)
- A integrated thermal celli protects the pump and the container when it is too hot
These are the smallest automatic pumps available on the market!!!
Features :
- Fully automatic with manual override - No float switch required!
- Submersible and ignition protected
- High efficiency, low amperage motor
- Stainless steel shaft
- Includes check valve
This product can expose you to chemicals, including 1,3-butadiene, known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov. .
Among the next generation of induction bilge pumps, the 800 GPH S series pumps fonoperate according to the principle of turbine resistance. The pump will turn on for approximately one minute every 2 1/2 minutes.
PRODUCT ID: 64162
SKU: NVN-64162
CSKU: CWR-64162
REWRITE: 75273-rule-800gph-electronic-sensing-bilge-pump
MPN: 20SA
UPC: 042237104779
ASIN: B01LZSZE5O
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 29-20SA
NAME: Bilge pump electronically sensed Rule 800GPH - 12V
NAME_EX: 12V ELECTRONICALLY SENSED BILGE PUMP RULE 800 GPH
PTITRE: Rule 800 GPH Electronically Sensed Bilge Pump - 12V
TYPE: Marine Plumbing and Ventilation | Bilge Pumps
SELLER: Rule
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Sports
Rule 800 GPH 20SA Bilge Pump electronically sensed-800
Rule 800 gph 1 electronically sensed bilge pump2 v by Hodges Marine
Sports
Gtags:
Boat |
GSpecs:
Rule 800GPH Electronic Sensing Bilge Pump - 12V Product Description 800GPH Electronic Sensing Bilge Pump - 12V
In the new generation of sensing bilge pumps, the S Series pump 800GPH 12V works on turbine principle. resistance. The pump will turn on every 2 1/2 minutes for approximately one second to detect the presence of water. If water is present, the pump will detect resistance and continue to run until all water is removed. After that, it will start checking for water again every 2 1/2 minutes.
Water is controlled between 1/8" and 3/8"!!! Great idea when energy savings are needed and as an added benefit no float switch is needed!
All this plus the added benefits of our standard bilge pump:
- Check valve included with hidden vent to prevent airlock
- Genuine suppelectromagnetic pressure (EMC)
- A built-in thermal cell that protects the pump and container when things get too hot
These are the most small automatic pumps available in the market!!!
Features:
- Fully automatic with manual override - No float switch needed!
- Submersible and protected against ignition
- High efficiency, low amperage motor
- Stainless steel shaft
- Includes check valve
This product can expose you to chemicals including 1,3-butadiene , known to the State of California to cause cancer and birth defects. or other reproductive problems. For more information,
Among the next generation of induction bilge pumps, the 800 GPH S Series pumpsoperate according to the principle of turbine resistance. The pump will turn on for approximately one minute every 2 1/2 minutes.
Rule 800GPH Electronically Sensing Bilge Pump - 12V Related ProductsBoatLIFE Silicone Rubber Sealant Cartridge - Clear
BoatLIFE Silicone Rubber Sealant Cartridge - White
Tube BoatLIFE Silicone Rubber - 2.8 FL. Oz -Clear
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - White
Frequently asked questions (FAQ) about the Rule 800GPH electronically sensed bilge pump - 12 V Who is the Rule?
How to describe the Rule 800GPH Electronic Sensing Bilge Pump - 12 V?
What is the warranty policy of the Rule 800GPH Electronic Sensing Bilge Pump - 12 V?
What is the warranty policy? operating voltage of the product?
What is the operating voltage of the product?
What is the type of the productt?
What is the amperage of the product?
What is the capacity of the product?
What is the operating mode of the product? product, automatic?
What is the diameter of the product?
What is the working capacity of the product (GPH)?
Who is the rule? In 1998, Rule was acquired by ITT Corporation and became part of the Marine & Leisure family of companies. Rule is a global leader in submersible bilge pumps for recreational and small commercial boats and a leading supplier of accessory products such as ventilation fans and winches. Look for the Rule name and vague logo when you need the best product performance and durability. How to describe the Rule 800GPH Electronic Sensing Bilge Pump - 12V? Among the new generation of induction bilge pumps, the 800 GPH S series pumps operate according to the resistance principleof the wheel. The pump will turn on for approximately one minute every 2 1/2 minutes. What is the warranty policy for Rule 800GPH Electronic Sensing Bilge Pump - 12V? Three-year limited warranty; Contact manufacturer for details
- Impellers optimized to provide greater flow at the same amperage
- Integrated thermal cutoff (TCO) provides additional protection to pump and vessel
- Backflow prevention reduces the amount of water remaining in the bilge
- Hidden body vents help prevent air pockets
- Threaded drain for easier installation and maintenance
- Internal computer chip turns pump on and off if no water is detected
- Integrated strainer bases detach for easy cleaning
- Completely submersible, rust-proof, corrosion-resistant and protected against ignition
- Three-wire wiringies allows connection to a switch for manual control or indicator light
- Rated output is 12V versus 13.6V li>
Save $48 when you purchase the Rule 800GPH Electronic Sensing Bilge Pump - 12V for only $96 at NVN Marin! Same day dispatch before 3pm.Rule 800GPH Electronically Sensed Bilge Pump - 12V Technical Specifications
Type: | Marine Plumbing & Ventilation | Bilge pumps |
---|---|
Saleur: | Ruler |
Weight: | 0.8 lbs |
Type: | Electric |
Gallons per hour: | 800 GPH |
Operation: | Automatic |
Volts: | 12v |
0.8 lb
3 .00 (h) x 7.00 (w) x 7.00 (l)
147.0
Yes
Yes
Yes
For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.
- Rule 800 GPH non-automatic round bilge pump - 24 V
- Rule 800 GPH non-automatic round bilge pump - 12 V
- Rule 800 GPH Legacy Shower Drain Replacement Pump - 24V - Compatible with 97A-24 and 98A-24 Shower Drain Boxes
- Rule 800 GPH Legacy Shower Drain Replacement Pump - 12V - Compatible with 97A and 98A Shower Drain Boxes.
- Rule 800 G.P.H. Square bilge pump
- Rule 7700D GPH drain pump - 12 V
- Rule 500GPH standard bilge pump - 24V