Sale!

Samlex 25A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor

$91

SKU: Samlex 25A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor
Category:

Samlex 25A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Electrical

This advanced fully automatic three stage 25 amp battery charger is ideal for charging all types of 24 volt lead acid batteries (flooded/absorbed glass mat (AGM)/gel cell) from a 120 volts, 60 Hertz or 230 volts. , 50 Hertz AC source. By means of a DIP switch setting, conversion to a two-step algorithm is possible for charging batteries connected to a DC load (DC UPS). The unit can also be used as a DC power supply. Features include overload, short circuit, reverse polarity and thermal overload protection. Unit allows charging of up to 2 separate battery banks.

Samlex America SEC2425UL Attributes
  • Number of Banks: 2
  • Application: 24 Volt AGM/Flooded/Gel Lead- Acid Batteries
  • Output voltage: 24 volts
  • Input voltage: 120 to 230 volts
  • Rated current: 25 amps on load
  • Number ofe Steps: 2/3 steps
  • Universality: Completely universal
  • Length (IN): 13.03 inches
  • Width (IN): 9.61 inches
  • Height (in): 3.82 inches
Samlex America SEC2425UL Features and Benefits
  • Switch mode technology for high efficiency, lightweight and quiet
  • Automatic operation for ALL flooded lead acid, AGM or gel cell batteries
  • Can charge 2 battery banks simultaneously, no isolator needed
  • Can be used as a power supply or DC UPS when used in conjunction with a battery
  • Protections: short circuit, overload, reverse battery connection and overheating
  • 2 year limited warranty
Samlex America SEC2425UL Installation Instructions
  • 11001-SEC-1250-2425UL-0920_Hrez.pdf
Samlex America SEC2425UL Technical Bulletins
  • 12001-SEC-2425UL-0920.pdf

Char25 Amp Battery Charger - 24 V - 2 Banks - 3 Stage with DIP Switch and Lugs - Includes Temperature Sensor

This advanced fully automatic three stage 25 A battery charger is ideal for charging all types of 24 volt-acid batteries (Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. With a DIP switch setting, conversion to a two-step algorithm is possible for charging batteries connected to a DC load (DC UPS). The unit can also be used as a DC power supply. Features include overload, short circuit, reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Features:

  • Switch mode technology for operation at high efficiency, light and quiet
  • FunctionAutomatic charging for ALL flooded lead acid, AGM or gel cell batteries
  • Can charge 2 battery banks simultaneously, no isolator needed
  • Can be used as a power supply or DC UPS when used in conjunction with a battery
  • User configurable AC input voltage 120 or 230 VAC, 50/60 Hz
  • User selectable (via switch DIP) for 2 or 3-stage fast and safe charging of self-contained and charged lead-acid batteries
  • "Half-power MB" reduces the maximum charging current to half the rated capacity, allows charging safely from low capacity batteries.
  • Voltmeter and ammeter for monitoring
  • Fan cooled depending on output current
  • Protections: short circuit , overcharging, reverse battery connection and overheating
  • Includes temperature sensor to prevent under/overchargingbattery if temperature varies significantly

Specifications:

  • Input: 120 VAC or 230 VAC
  • Output: 24 VDC
  • Amps: 25
  • Remote: 900-RC
  • Weight: 9 (lbs)
  • Weight: 4.1 (kg)
  • Dimensions: 13.03 x 9.6 x 3.82 (in)
  • Dimensions: 331 x 244 x 97 (mm)
  • Safety: Listed to UL UL-1564, EMI Compliant to FCC Part 15(B), Class B
  • Warranty: 2 Years Limited

Applications:

  • Test bench
  • Automotive
  • Marine
  • Communication sites
  • Battery Backup Systems
  • Hobby


Through DIP switch setting, it can be converted to a two-step algorithm to charge the battery connected to the DC load (DC Ups). The battery charger can be...
PRODUCT ID: 67192
SKU: NVN-67192
CSKU: CWR-67192
REWRITE: 78303-samlex-25a-battery-charger-24v
MPN: SEC-2425UL
UPC: 622988083068
ASIN: B00BRLJ6NS
WSKU:
SSKU:
KSKU: S6ASEC2425UL
GSKU:
MSKU:
LSKU:
NAME: Samlex 25A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor
EX_NAME: SAMLEX SEC-2425UL 2 BANK 3 STAGE 24V 25 BATTERY CHARGER
PTITLE: Samlex 25A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor
TYPE: Electric | Battery Chargers
SELLER: Samlex America
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
Automotive Parts & Accessories
Samlex SEC- 2425UL Advanced Fully Automatic Battery Charger Power Supply, 24V, 25A, 3 Stage, Configurable AC Input Voltage, Fan Cooled Based on Output Current, Voltmeter and Ammeter for Sustainabilityrveillance
"Samlex America SEC-2425UL, 24V 25A Battery Charger"
Auto Parts & Accessories
Gtags:

GSpecs:

Samlex 25Amp Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Product Description

This advanced fully automatic three stage 25 amp battery charger is ideal for charging all types of 24 volt cables. -acid batteries (flooded/absorbed glass mat (AGM)/gel cell) from a 120 volt, 60 Hertz or 230 volt, 50 Hertz AC source. By means of a DIP switch setting, conversion to a two-step algorithm is possible for charging batteries connected to a DC load (DC UPS). The unit can also be used as a DC power supply. Features include overload, short circuit, reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Samlex America SEC2425UL Attributes
  • Number of Banks: 2
  • Application: 24 Volt AGM/Flooded/Gel Lead Acid Batteries
  • Output Voltage: 24V
  • Input Voltage: 120 to 230 Volts
  • Rated Ampere: 25 amp load
  • Number of stages: 2/3 stages
  • Universality: Fully universal
  • Length (IN): 13.03 inches
  • Width (IN): 9.61 inches
  • Height (IN): 3.82 inch
Samlex America SEC2425UL Features and Benefits
  • Switch Mode Technology for high efficiency, lightweight and quiet operation
  • Automatic operation for ALL flooded lead acid, AGM or gel cell batteries
  • Can charge 2 battery banks simultaneously, no isolator needed
  • Can be usedused as a DC power supply or UPS when used in conjunction with a battery
  • Protections: short circuit, overload, reverse battery connection and overheating
  • Limited 2 Year Warranty
Samlex America SEC2425UL Installation Instructions
  • 11001-SEC-1250-2425UL-0920_Hrez.pdf
Samlex America SEC2425UL Technical Bulletins
  • 12001-SEC-2425UL-0920.pdf

25A Battery Charger - 24V - 2 Banks - 3 Stage with DIP Switch and Lugs - Includes Sensor Temperature

This advanced 25 Amp fully automatic three stage battery charger is ideal for charging all types of 24 volt lead acid batteries (flooded/absorbed glass mat (AGM) /gel cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-step algorithm is possible for charging connected batteries to aDC charging (DC UPS). The unit can also be used as a DC power supply. Features include overload, short circuit, reverse polarity and thermal overload protection. The unit allows charging of up to 2 separate battery banks.

Features:

  • Switch mode technology for operation at high efficiency, lightweight and quiet
  • Automatic operation for ALL Charged Lead Acid, AGM or Gel Cell batteries
  • Can charge 2 battery banks simultaneously, no isolator needed
  • Can be used as a DC power supply or UPS when used in conjunction with a battery
  • li>
  • User configurable AC input voltage 120 or 230 VAC, 50/60 Hz
  • User selectable (via DIP switch) for fast and safe charging in 2 or 3 stages of self-contained and charged lead-acid batteries
  • The "Half-pu Modeissance" reduces maximum charging current to half of rated capacity, allows safe charging of low capacity batteries.
  • Voltmeter and ammeter for monitoring
  • Fan cooled based on output current
  • Protections: short circuit, overload, reverse battery connection and overheating
  • Includes temperature sensor to prevent battery under/overcharge if temperature varies widely

Specifications:

  • Input: 120 VAC or 230 VAC
  • Output: 24 VDC
  • Amps: 25
  • Remote: 900-RC
  • Weight: 9 (lbs)
  • Weight: 4.1 ( kg)
  • Dimensions: 13.03 x 9.6 x 3.82 (in)
  • Dimensions: 331 x 244 x 97 (mm)
  • Safety : Listed to UL UL-1564, EMI compliant to FCC Part 15(B), Class B
  • Warranty: 2 years limited

Applications:

  • Test bench
  • Automotive
  • Marine
  • Communications Sites
  • Battery Backup Systems
  • Hobby


Through the DIP switch setting, it can be converted into a two-step algorithm to charge the battery connected to the DC Charge (DC Ups). The battery charger can be...

Samlex 25A Battery Charger - 24V - 2 Banks - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Related ProductsSamlex Remote Control for SEC Battery Chargers


Frequently Asked Questions (FAQ) about Samlex 25A Battery Charger - 24V - 2 Banks - 3 Stage with DIP Switch and Lugs - Includes Temperature Sensor Who is the Samlex America?
How to describe the Samlex 25A Battery Charger - 24V - 2-Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor?
Is this product portable?
What is the output voltage?
What is the voltageoutput?
What is the input voltage?
How many banks support charging?
Who is Samlex America? Develop lasting relationships with our customers by providing innovative power conversion products backed by the best customer service in the industry. Samlex manufactures and distributes power conversion products to customers worldwide. Synonymous with providing quality products at competitive prices and being backed by the best customer service in the industry. How to describe the Samlex 25A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor? Through DIP switch setting, it can be converted into a two-stage algorithm to charge the battery connected to DC load (DC Ups). The battery charger can be... Is this product portable? NoWhat is the output volume of the stadium? 24vWhat is the output voltageie? 25aWhat is the input voltage? 120/240vHow many banks cover the fees? 2

Save $126 on the purchase of the Samlex 25 Amp Battery Charger - 24 V - 2 Banks - 3 Stages with DIP Switch and Terminals - Includes a temperature sensor for only $507 from NVN Marine! Same day dispatch before 3 p.m. Samlex 25A Battery Charger - 24V - 2 Bank - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Technical Specifications
Type:

Electric | Battery Chargers

Supplier:

Samlex America

Weight:

11.0 lbs

Charger output voltage:

24v

Charger output - Amps:

25a

Charging banks:

2

Laptops:

No

Charger Input - Voltage:

120/240v

Manual of the product:

Download the PDF

Product brochure:

Download the PDF

Samlex 25A Battery Charger - 24V - 2 Banks - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor User ReviewsCharger Samlex 25A Battery - 24V - 2 Banks - 3 Stage with DIP Switch and Terminals - Includes Temperature Sensor Shipping & Returns
Shipping Weight:

11.0 lbs

Box sizes:

6.00 (h) x 11.00 (l) x 17.00 (l)

Cubic feet:

1122.0

Recordable:

Yes

P65:

Yes

For detailed shipping terms, please visit our ShippPolreturns policy and you can find our returns and refund policy here.