Scanstrut ROKK 10W Cove Wireless Phone Charging Pocket Electrical
ROKK 10W Cove Wireless Phone Charging Pocket
Cove 10W securely houses and charges your phone wirelessly at the same time. Now you can keep your phone in a safe place on board, stowed, charged and ready to go!
The Qi-certified IPX6 waterproof 12/24V wireless charging range allows wireless charging for the outdoor environment without the need for phone charging cables.
Designed to starting from scratch, it is the first in the world. Waterproof wireless charging system created specifically for use on board, with unique 10W technology housed in an IPX6, fully encapsulated and sealed unit.
The most convenient way to store and charge without wire your phone on board inside or out! Cove 10W safely houses and charges your phone wirelessly at the same time. You can now keep your phone in a safe place on board, ranegated, loaded and ready to go!
Smart design reduces installation depth by storing and wirelessly charging the sidephone. Perfect for integrating into consoles, partitions, seats, cabinets and more! Slip your phone into the pocket and instantly start charging wirelessly.
The internal non-slip mat prevents your phone from sliding around and its rubber front lip with an easy-access thumb bevel acts as a barrier security, ensuring that your phone always remains safe.
The Cove's front panel features passive air vents, promoting cool air into the pocket and through rubber cooling channels, keeping your phone cooler for longer. This gives you the most efficient outdoor wireless charging possible.
Case Compatibility:
- ROKK Wireless is designed to work with themost thin phone cases. to 0.11" (3 mm)
Features:
- Compatible with all Qi wireless charging electronic devices .
- Place your phone in the center of the charging mat and instantly start wireless charging.
- Rounded corners and tapered front design eliminate snag hazards, allowing easy installation in high traffic areas of the boat where phone charging/storage has until now been impossible.
- The cove is part of our IPX6 waterproof 12/24V Qi certified waterproof wireless charging range which allows wireless charging for the outdoor environment without phone charging cables.
- Small and compact, our charging mat is suitable for any type of boat, opening up the possibilities for onboard charging.
- One easy to cut to the chosen mounting location, 4 screws provided for fixing and a faceplatee before to leave the finished result clean and uncluttered – you are now ready to store. Charge. Log in!
- The niche is perfect for storing other personal items such as wallets and keys, as the charger will only start charging when a phone is placed on the mat.
Technical specifications:
- Input voltage range - 10-30 V DC (12/24 V system)
- Max. input current - 2A
- Output power - 10W (9V, 1.1A)
- IPX6 waterproof
- Qi certified wireless charging
In the box:
- Pocket with bezel
- Wireless charger
- Mounting hardware
- Instruction Manual
*Sold as an individual
PRODUCT ID: 95499
SKU: NVN-95499
CSKU: CWR-95499
REWRITE: 106610-scanstrut-rokk-10w-cove- wireless phone charging
MPN: SC-CW-09F
UPC:
ASIN:
WSKU :
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: SCANSTRUT ROKK 10W WIRELESS PHONE CHARGING POCKET
EX_NAME:
PTITLE: Scanstrut ROKK 10W Cove Wireless Phone Charging Pocket
TYPE: Electric | Accessories
SELLER: Scanstrut
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIESAllerogle Title:
Category Amazon:
Gtags:
GSpecs:
Scanstrut ROKK 10W Cove Wireless Phone Charging Pocket Product Description
ROKK 10W Cove Wireless Phone Charging Pocket
Cove 10W houses and wirelessly charges your phone at the same time. Now you can keep your phone in a safe place on board, stowed, charged and ready to go!
The Qi-certified IPX6 waterproof 12/24V wireless charging range allows wireless charging for the outdoor environment without the need for phone charging cables.
Designed to starting from scratch, it is the first in the world. Waterproof wireless charging system created specifically for use on board, with unique 10W technology housed in an IPX6, fully encapsulated and sealed unit.
The most convenient way to store and charge without wire your phone on board inside or out! Cove 10W safely houses and charges your phone wirelessly at the same time. Yous now you can keep your phone in a safe place on board, stowed, charged and ready to go!
The smart die panel reduces installation depth by storing and wirelessly charging the phone on the side. Perfect for integrating into consoles, partitions, seats, cabinets and more! Slip your phone into the pocket and instantly start charging wirelessly.
The internal non-slip mat prevents your phone from sliding around and its rubber front lip with an easy-access thumb bevel acts as a barrier security, ensuring that your phone always remains safe.
The Cove's front panel features passive air vents, promoting cool air into the pocket and through rubber cooling channels, keeping your phone cooler for longer. This gives you the most efficient outdoor wireless charging possible.
Compatibility ofCases:
- ROKK Wireless is designed to work with most thin phone cases. to 0.11" (3 mm)
Features:
- Compatible with all Qi wireless charging electronic devices .
- Place your phone in the center of the charging mat and instantly start wireless charging.
- Rounded corners and tapered front design eliminate any snag hazards, allowing for easy charging. installation in high-traffic areas of the boat where phone charging/storage has previously been impossible.
- The Cove is part of our Qi-certified IPX6 12/24V waterproof wireless charging range which allows wireless charging for the outdoor environment without phone charging cables.
- Small and compact, our charging mat is perfect for any type of boat, unlocking onboard charging possibilities.
- li>
- Easy cuttinge to your chosen mounting location, 4 screws provided for fixing and a front fascia to leave the end result clean and uncluttered: you are now ready to Store. Charge. Log in!
- The niche is perfect for storing other personal items such as wallets and keys, as the charger will only start charging when a phone is placed on the mat.
Technical specifications:
- Input voltage range - 10-30 V DC (12/24 V system)
- Max. input current - 2A
- Output power - 10W (9V, 1.1A)
- IPX6 waterproof
- Qi certified wireless charging
In the box:
- Pocket with bezel
- Wireless charger
- Equipment assembly
- Instruction manual
*Sold individually
Scanstrut ROKK 10W Cove Wireless Phone Charging Pocket Related ProductsPhone Receiver sWireless Scanstrut Patch - Lightning
Scanstrut Wireless Phone Receiver Patch - Micro USB
Frequently Asked Questions (FAQ) about SCANSTRUT ROKK WIRELESS COVE 10W CHARGING POCKET FOR PHONE Who is Scanstrut?
Who is Scanstrut? Scanstrut is a complete range of ready-to-use installation solutions for every type of marine electronics. From mounting a radar on your yacht to a satcom antenna on your motorboat, Scanstrut offers a choice of solutions that guarantee quick, easy and aesthetically pleasing installation. Scanstrut products are fully approved and recommended by all major marine electronics manufacturers.
Save $50 when you purchase the Scanstrut ROKK 10W Cove Wireless Phone Charging Pad for just $78 at NVN Marine! Same day dispatch before 3 p.m. Phone charging pocketone wireless Scanstrut ROKK 10W Cove Technical specifications
| Type: | Electric | Accessories |
|---|---|
| Supplier: | Scanstrut |
| Type: | Chargers |
| User Guide: | Download PDF |
| Product installation: | Download PDF |
- Scanstrut ROKK 10W Cove LED Wireless Phone Charging Pocket
- Scanstrut ROKK 10W Catch Waterproof Wireless Phone Charging Pad
- Compact pod mounted on Scanstrut rail - Screens up to 8"
- Scanstrut rail support for GPS or VHF antenna
- Scanstrut 2 radome plate for Furuno domes
- Scanstrut 6' radar pole mounting kit for Raymarine 2 kW and 4 kW dome
- Scanstrut 6' radar pole mounting kit for Garmin and Furuno domes
