Sale!
Scanstrut Scanpod Deck Pod Uncut f/15" Monitor - Deep Back
Scanstrut Scanpod Deck Pod Uncut f/15" Monitor - Deep Back

Scanstrut Scanpod Deck Pod Uncut f/15" Monitor - Deep Back

$86

SKU: Scanstrut Scanpod Deck Pod Uncut f/15" Monitor - Deep Back
Category:

Scanstrut Scanpod Deck Pod Uncut f/15" Monitor - Deep Back Boat Outfitting

Scanpod Deck Pod

Solve the challenge of finding a flat mounting surface to install your displays on the wheelhouse of your powerboat, RIB or sailboat.

The range includes options for installing standard radar displays, chartplotters and navigation instruments.

  • Suitable for 15 inch screens
  • Usable face 16.7H x 13.7W

Swivel and tilt base

One-handed quick release action. Simply release the lever, rotate and tilt it as needed before locking it back into position.

Better viewing angle

A ball head adjustable allows for range of motion and multiple mounting angles

Added strength

Inner reinforcement plate secures the Deck Pod base to the pod and gives a increased rigidity at assembly, eliminating potential damage from shock and vibration

Height mounting

Deck Pod models can be mounted high. Refer to the part number guide for compatibility

Increased protection

The pod seal is made from a high resistance silicone to tear, it has very high heat and UV resistance, so you can be sure that it will not break. deteriorate over time.

Supplied uncut

As standard you will receive your Scanpod uncut (for advice on cutting please see the FAQ tab). For larger orders, factory cutting service is available.



Solve the problem of finding a horizontal mounting surface to install the monitor on the rotating and tilting base of the motorboat. Quickly release the action with one hand. Simply release the handle to rotate and tilt for the best viewing angle. The adjustable ball jointThe allows a range of motion and a variety of installation methods, and increases strength. The internal support plate secures the Deck Pod base to the Pod and increases overhead. Deck Pod models can be installed high. For more information about Compa Scanpod Deck Pod, please refer to the reference guide. Solve the challenge of finding a horizontal mounting surface to mount the monitor on a powerboat, RIB or sailing cabin. The range includes options for installing standard radar displays, chartplotters and navigators. Rotate and tilt the base. Quickly release the action with one hand. Simply release the handle, rotate and tilt it as needed, then lock it in place. Better viewing angle. Adjustable ball head allows for range of motion and multiple installation angles. Increased strength. Interior support plate secures the Deck Pod base to the Podand improves component rigidity, eliminating potential damage caused by vibration and impact. Overhead installation. Deck Pod models can be installed high. See the part number guide for compatibility. Increases protection. The Pod's gasket is made from high tear strength silicone, which has high heat and UV resistance, so you can rest assured that it won't deteriorate over time. Supplied cut.
PRODUCT ID: 41491
SKU: NVN-41491
CSKU: CWR-41491
REWRITE: 52602-scanstrut-scanpod-deck-pod-uncut-f-15-display
MPN: SPD-15D-W
UPC: 5060114793088
ASIN: B004DL13KI
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Scanstrut Scanpod Deck Pod Uncut f/15" Display - Deep Back
NAME_EX: SCANSTRUT SCANPOD UNCUT FOR 15" DISPLAY - DEEP BACK
PTITLE: Scanstrut Scanpod Deck Pod Uncut f/15" Display - Deep Back
br> TYPE: Boat fitting | Display Stands
SELLER: Scanstrut
ELECTRONICS> MARINE ELECTRONICS
Sports
Scanpod Deck Pod Uncut f/15" Display - Deep Back
br> Scanstrut Uncut Scanpod for 15" Screen - Deep Back SPD-15D-W
Sports
Gtags:
15 screens maximum

GSpecs:

Scanstrut Scanpod Deck Pod Uncut f/15" Display - Deep Back Product description

Scanpod Deck Pod

Solve the challenge of finding a flat mounting surface to mount your displays on your motorboat, RIB or sailboat wheelhouse.

The range includes options to install radar displays, chartplotters and standard navigation instruments.

  • Fits 15" screens
  • Usable face 16.7 H x 13.7 W

Swivel and tilt base

One-handed quick release action. Simply release the lever, pivot and tilt. to meet your needs before locking into position

Better viewing angle

An adjustable ball joint allows for freedom of movement and multiple mounting angles

Added strength

The interior reinforcement plate secures the base of the Deck Pod to the pod and gives increased rigidity to the assemblyage, eliminating potential damage from shock and vibration

Overhead mounting

Deck Pod models can be mounted overhead. Refer to the part number guide for compatibility

Increased protection

The pod seal is made from a high resistance silicone to tear, it has a very high heat and UV resistance so you can be sure that it will not deteriorate over time.

Supplied uncut

As standard you will receive your Scanpod uncut (for advice on cutting please see the FAQ tab). For larger orders, factory cutting service is available.



Solve the problem of finding a horizontal mounting surface to install the monitor on the rotating and tilting base of the motorboat. Quickly release the action with one hand. Simply release the handle to pivoter and tilt the best viewing angle. The adjustable ball joint allows for a range of movement and a variety of installation methods, and increases strength. The internal support plate secures the Deck Pod base to the Pod and increases overhead. Deck Pod models can be installed overhead. For more information on the Compa Scanpod Deck Pod, please refer to the reference guide. Solve the challenge of finding a horizontal mounting surface to mount the monitor on a powerboat, RIB or sailing cabin. The range includes options for installing standard radar displays, chartplotters and navigators. Rotate and tilt the base. Quickly release the action with one hand. Simply release the handle, rotate and tilt it as needed, then lock it in place. Better viewing angle. Adjustable ball head allows for range of motion and multiple installation angles. AC forceraw. The interior support plate secures the Deck Pod base to the Pod and improves component rigidity, eliminating potential damage from vibration and impact. Overhead installation. Deck Pod models can be installed high. See the part number guide for compatibility. Increases protection. The Pod Gasket is made of high tear strength silicone, which features high heat resistance and UV resistance, so you can rest assured that it will not deteriorate over time. Delivered uncut.

Frequently Asked Questions (FAQ) about Scanstrut Scanpod Deck Pod Uncut f/15" Display - Deep Back Who is Scanstrut?
How to describe Scanstrut Scanpod Deck Pod Uncut f/15 " Display - Deep Back?
Is it cut or uncut?
How to mount or what is the mounting style of the Scanstrut Scanpod Deck Pod Uncut f/15" Display - Deep Back?
How big isusable surface area of the product?
Who is Scanstrut? Scanstrut is a complete range of ready-to-use installation solutions for every type of marine electronics, from mounting a radar to your yacht. to a satcom antenna on your motorboat, Scanstrut offers a choice of solutions that guarantee quick, easy and aesthetic installation. Scanstrut products are fully approved and recommended by all major players in the maritime industry. electronics manufacturers.How to describe Scanstrut Scanpod Deck Pod Uncut f/15" Display - Deep Back? Solve the problem of finding a horizontal mounting surface to install the monitor on the rotating and tilting base of the motorboat. Quickly release the One-handed action Simply release the handle to rotate and tilt to the best viewing angle. Adjustable ball head allows for a range of motion and a variety of installation methods, and increases.you resistance. The internal support plate secures the Deck Pod base to the Pod and increases the height of the Deck Pod models. installed above. For more information on the Compa Scanpod Deck Pod, please refer to the reference guide. Solve the challenge of finding a horizontal mounting surface to mount the monitor on a powerboat, RIB or sailing cabin. standard chartplotters and browsers. Rotate and tilt the base. Quickly release the one-handed action, rotate and tilt it as needed, then lock it in place. Better viewing angle. Adjustable ball head allows for range of motion and multiple installation angles. Increased strength. The interior support plate secures the Deck Pod base to the Pod and improves component rigidity, eliminating potential damage from vibration and impact. Overhead installation. Deck Pod models can be installed high. Check out the gReference guide for compatibility. Increases protection. The Pod's gasket is made from high tear strength silicone, which has high heat and UV resistance, so you can rest assured that it won't deteriorate over time. Supplied uncut. Is it cut or uncut? Uncut
      How to mount or what is the mounting style of the Scanstrut Scanpod Deck Pod Uncut f/15" Display - Deep Back? DeckHow big is the usable surface area of the product? 16.7"L x 13.7"H

      Save $244when you purchase the Scanstrut Scanpod Deck Pod Uncut f/15" Monitor - Deep Backfor only $540b> from NVN Marine! Same day dispatch before 3 p.m. Scanstrut Scanpod Deck Pod Uncut Display f/15" - Deep Fold Technical Specifications
      Type:

      Boat Equipment | Display Mounts
      Supplier:

      Scanstrut
      Weight:

      12.0 lbs
      Cut/Uncut:

      Uncut
      Editing style:

      Bridge
      Usable side:

      16.7"W x 13.7"H
      User Guide:

      Download PDF
      Product Installation:

      Download PDF
      Scanstrut Scanpod Deck Pod Uncut f/15" Screen - Deep Back User ReviewsScanstrut Scanpod Deck Pod f/15" Screen /15" Uncut - Deep Back Shippshipping & Return
      Shipping Weight:

      12.0 lbs
      Box sizes:

      8.00 (h) x 16.00 (w) x 19.00 (w)
      Cubic Feet:

      2432.0
      Returnable:

      Yes

      For detailed shipping terms, please see our shipping policyedition and you can find our returns and refund policy here.

Related products