Seastar AP1219 Type 1 12V 60 CU inch/min Pump Marine Navigation & Instruments

The SeaStar Autopilot pump is a fixed flow reversible type assembly that uses an internal hydraulic gear pump, producing very little vibration or noise. It comes in 12 and 24 volt configurations, as well as two different pump sizes. It can be used as a stand-alone pilot pump or can be mounted on a previously installed SeaStar Power Assist unit and can avoid the need to penetrate hydraulic lines.

SeaStar AP1219 Attributes

Power Voltage input: 12 Volt
Maximum pressure rating: 1000 PSI
Amp rating: 4 A to 8 A
Cylinder capacity: 4.9 to 12. 5 cubic inches
Flow rate: 60 cubic inches per minute
Line length: 24 feet

SeaStar AP1219 Features and Benefits

Design compact
Low energy consumption
Superior resistance to corrosion
Quiet operation
Stand-alone or mounts on the unitSeaStar electric assistance
ABYC, CE and J1171 compliant
Long life DC motor
Limited to 1 year Warranty

Technical bulletins SeaStar AP1219

pas1-SeaStar-Autopilot_Pump.pdf

The Seastar Autopilot pump is a fixed flow, reversible pump unit that uses an internal hydraulic gear pump, producing very little vibration or noise. It comes in two different pump sizes (type 1 and type 2).

AUTOMATIC PILOT? KEY FEATURES

Long life DC motor (i.e. long life brushes)
Design compact
Simplified installation
Low energy consumption
ABYC, CE and J1171 compliant
Superior corrosion resistance
Quiet operation
All travel mounting brackets included


Voltage		12 volts

Fittings		Compatible with Standard Seastar Hose - Thread 9/16"p align="right">
Wire Details
Length		24"
Gauge		12 awg
Connector		Nonen - Bare slopes

Oil compatibility		Seastar Steering Fluid (MIL 5606)

Weight		4.9 lb (2.2 kg)

Pump sizes		Type 1: 60 inches3/ min (no load)
		Type 2: 100 cfm (no load)

Maximum pressure		1000 psi

Typical current consumption		12V Type 1: 4? 8 amps
(depending on application)		12V Type 2: 5? 11 amps



RAM capacity
Type 1		4.9 in.³ - 14 in. ³
Type 2		14 inches³ - 21 inches³

The SeaStar solution The Seastar autopilot pump is a group of reversible pumps with fixed flow using an internal hydraulic gear pump, which produces almost no vibration or noise. It offers two different types of pumps: Type 1 and Type 2. The main functions of the autopilot.

The SeaStar solution The Seastar autopilot pump is a set of reversible fixed flow pumps using a hydraulic pump internal gear, which produces almost no vibration or noise. It offers two different pump types: Type 1 and Type 2. The main functions of the autopilot.
PRODUCT ID: 1001531
SKU: NVN-1001531
CSKU: CWR-1001531
REWRITE: 1012642 - Seastar-ap1219-type-1-12v-pump-60cu
MPN: AP1219
UPC: 731957897817
ASIN: B00C3FPRT4
WSKU: TELAP1219
SSKU:
KSKU: S5RAP1219
br>GSKU:
MSKU: AP-1219
LSKU: 1-AP1219
NAME:Seastar AP1219 Type 1 Pump 12v 60CU inches/min
NAME_EX:
PTITLE: Seastar AP1219 Type 1 Pump 12v 60CU inches/min
TYPE: Marine Navigation & Instruments | Autopilots
SELLER: Seaview

Wireless

Seastar Ap1219 Type 1 12V Pump 60cu Inch-Min
Wireless
br>Gtags:

SeaStar Solutions

GSpecs:

Seastar AP1219 Type 1 12V 60CU Inch/min Pump Product Description

SeaStar AP1219 Attributes

Input Voltage: 12 Volts
Maximum Pressure Rating: 1000 PSI
Rated Ampere: 4 A to 8 A
Cylinder Capacity: 4.9 TB 12.5 cubic inches
Throughput: 60 cubic inches per minute
Wire length: 24 feet

SeaStar AP1219 Features and Benefits

Compact Design
Low power consumption
Superior corrosion resistance
Quiet operation
Stand-alone or mounts to SeaStar power assist unit
ABYC, CE and J1171 compliant
Long-life DC motor
One Year Limited Warranty

SeaStar AP1219 Technical Bulletins

pas1 -SeaStar-Autopilot_Pump.pdf

The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise. It comes in two different pump sizes (type 1 and type 2).

AUTOMATIC PILOT? KEY FEATURES

Long life DC motor (i.e. long life brushes)
Design compact
Simplified installation
Low energy consumption
ABYC, CE and J1171 compliant
Superior corrosion resistance
Quiet operation
All displacement mounting brackets included

Voltage

12 volts

Connections

Compatible with standard Seastar hose - 9/16" X 24 UNEF thread

Thread details

Length

24"

Gauge

12 awg

Connector

None - Naked Leads

Oil compatibility

Seastar Steering Fluid (MIL 5606)

Weight

4.9 lb (2.2 kg)

Pump sizes

Type 1: 60 cfm (no load)

Type 2: 100 cfm (no load)

Maximum pressure

1000 psi

Typical current consumption

12V Type 1: 4? 8 amps

(Depending on application)

12V Type 2: 5? 11 amps

RAM capacity

Type 1

4.9 inches³ -14 inches³

Type 2

14 in³ - 21 in³

The SeaStar FloorThe Seastar autopilot pump is a set of fixed flow reversible pumps using an internal hydraulic gear pump, which produces almost no vibration or noise. It offers two different pump types: Type 1 and. Type 2. The main functions of the autopilot.

The SeaStar solution The Seastar autopilot pump is a group of reversible fixed flow pumps using an internal hydraulic gear pump, which produces almost no vibration or noise. It offers two different types of pumps: Type 1 and Type 2. The main functions of the autopilot

Frequently asked questions (FAQ) about.the Seastar AP1219 Type 1 12 V 60 CU inch/min pump Who is the Seaview?
How to describe the Seastar AP1219 Type 1 12 V 60 CU inch/min pump?
What is the weight of the product?
Who is the Seaview? Working closely with all major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sail, recreational and commercial boats. Seaview has added a hard coat anodizing process before powder coating to ensure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry. How to describe the Seastar AP1219 Type 1 12V 60CU Inch/Min Pump? The SeaStar Solution The Seastar autopilot pump is a fixed-flow reversible pump group using an internal hydraulic gear pump, which produces almost no vibration or noiset. It offers two different pump types: Type 1 and Type 2. The main functions of the autopilot.

The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration. or noise.
It comes in two different pump sizes (type 1 and type 2).
AUTOMATIC PILOT? KEY FEATURES Long life, simple installation and maintenance, low noise and vibration levels.

The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses a internal hydraulic gear pump, producing very little or no vibration.
It is offered in two different pump sizes (type 1 and type 2).
The Seastar features 'a patented system to automatically adjust fluid flow to maintain the desired pressure. .
AUTOMATIC PILOT?FEATURESMAIN FEATURES: Long life, low power consumption, high reliability and low noise.

How heavy is the product? 6.55

The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise.
It is offered in two different pump sizes (type 1 and type 2).
AUTOMATIC PILOT? KEY FEATURES Long life, simple installation and maintenance, low noise and vibration levels.
The Seastar Autopilot pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise.
It is offered in two different pump sizes (type 1 and type 2).
The Seastar features a patented system to automatically adjust the fluid flow to maintain pressuren desired.
AUTOMATIC PILOT? KEY FEATURES: Long life, low power consumption, high reliability and low noise.
The Seastar Autopilot pump is a fixed-flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise.
It is offered in two different pump sizes (type 1 and type 2). .
AUTOMATIC PILOT? KEY FEATURES: Long service intervals for the hydraulic gear pump, low power consumption, high efficiency and no need for priming.
The Seastar Autopilot pump is a set of fixed flow reversible pumps which uses an internal hydraulic gear pump. , producing very little vibration or noise.
It is offered in two different pump sizes (type 1 and type 2).
AUTOPILOT? KEY FEATURES: Long life, flow vibration, high reliability.

Save $36 when you buy the Seastar AP1219 Type 1 12V 60CU in/min Pump for only $567 at NVN Marine! Same day dispatch before 3 p.m. Seastar AP1219 Type 1 12V 60CU Inch/min Pump Technical Specifications

Type:	Navigation & Marine Instruments \| Autopilots
Seller:	Seaview
Weight:	5.0 lbs

Seastar AP1219 Type 1 12v Pump 60CU in/min User ReviewsSeastar AP1219 Type 1 12v Pump 60CU in/min Shipping & Returns

Shipping Weight:	5.0 lbs
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic feet:	1.0
Returnable:	Yes
USPS Firste Class:	Yes
P65:	Yes