Seastar PA6020 T2 12v Power Assisted Autopilot Pump Marine Navigation & Instruments
Converts manual hydraulic steering for a dramatic reduction in steering wheel torque and at the same time provides a pump for an autopilot installation. The SeaStar Power Assist Autopilot Pump is the standard power assist product with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot Pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes.
SeaStar PA6020 Attributes- Input voltage: 12 volts
- Pressure rating Maximum: 1000 PSI
- Ampere Rating: 5 A to 11 A
- Cylinder Capacity: 12.5 to 21 cubic inches
- Flow Rate: 100 cubic inches per minute
- Line length: 24 feet
- Converts dimanual hydraulic steering in power steering
- Dramatic reduction in steering wheel torque
- OEM or retrofit
- Compatible with electric bleed system
- Protected against ignition
- ABYC, CE, NMMA, ISO 10592 approved
- Easy to install
- Limited to 1 year Warranty
- pas3-SeaStar_power_assist_autopilot.pdf
Seastar PA6020 Power Assisted Autopilot Pump
Model: PA6020- Autopilot ready — one-time installation (i.e. no need to enter the system to install the pump).
- Converts manual hydraulic steering to power steering.
- Dramatic reduction in steering wheel torque.
- Easy installation.
- OEM or retrofit.
- Simple addition to an existing system. SeaStar manual system (1.4 to 2.4 SeaStar bar pumps)
- Compatible withec the electrical purge system.
- Protected ignition (SAE J-1171).
- ABYC, CE approved, NMMA, ISO 10592.
- Replaces others 12 and 24 volt systems
Converts manual hydraulic steering for a dramatic reduction in steering torque eel and at the same time provides a pump for an autopilot installation.
The SeaStar Power Assist Autopilot Pump is the standard power assist product with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot Pump is a set of reversible flow pumps stationary which uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes (type 1 and type 2).
Specifications| Voltage | 12vDC |
| Fittings | Compatible with standard SeaStar hoses (HO51xx, etc.) |
| Compatibility with oil | SeaStar Steering Fluid (MIL 5606) |
| Autopilot Pump Sizes | 60 CFM (no load) |
| Maximum pressure | 1000 psi |
| Typical current consumption (depending on application) | 5 - 11 amps |
| Pump displacement | 12.5 in3 — 21 in3 |
Seastar PA6020 Electrically Assisted Autopilot Pump Model: PA6020 Autopilot is Ready to be installed in one go (i.e. no entry into the system is required to install the pump). ). Convert manual hydraulic steering to power steering. Steering wheel torque is significantly reduced. Easy installation. OEM or refurbished. Addsimply to the existing SeaStar manual system (from SeaStar 1.4-2.4 helm pump) to be compatible with the power purification system. Protection against ignition (SAE J-1171). ABYC, CE, NMMA, ISO 10592 certification passed. Replace other 12V and 24V systems. Convert manual hydraulic steering to significantly reduce steering wheel torque while providing pumps for automatic steering devices. The SeaStar power-assisted auto-drive pump is a standard power-assisted product, and a Type 1 or 2 auto-drive pump is added. The SeaStar Autopilot pump is a fixed-flow reversible pump assembly using an internal hydraulic gear pump, which generates little vibration or noise. It offers 12 volt and 24 volt configurations, as well as two different pump specifications (type 1 and type 2). The 12 V DC voltage connector is compatible with thes standard SeaStar hoses (HO51xx, etc.). Oil Compatibility SeaStar Steering Fluid (MIL 5606) Autopilot Pump Specifications 60 in3/min (no load) maximum pressure 1,000 psi typical current (depending on application) 5-11 amps Autopilot Cylinder Capacity pump 12.5 in3 × 21 in3
PRODUCT ID: 1001534
SKU: NVN-1001534
CSKU: CWR-1001534
REWRITE: 1012645-seastar-pa6020-power-assist-autopilot-pump- t2
MPN: PA6020
br>UPC: 731957898043
ASIN:
WSKU: TELPA6020
SSKU:
KSKU: S5RPA6020
GSKU:
MSKU: PA6020
LSKU:
NAME: Seastar PA6020 T2 12V Electrically Assisted Autopilot Pump
NAME_EX:
PTITLE: Seastar PA6020 T2 12V Electrically Assisted Autopilot Pump
TYPE: Marine Navigatisur et instruments | Autopilots
SELLER: Seaview
Seastar PA6020 Autopilot Pumpelectric heater T2 12 V
Gtags:
| SeaStar Solutions |
GSpecs:
Seastar PA6020 T2 12v Power Assisted Autopilot Pump Product Description
Converts manual hydraulic steering for a dramatic reduction in steering wheel torque and at the same time provides a pump for an autopilot installation. The SeaStar Power Assist Autopilot Pump is the standard power assist product with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot Pump is a fixed flow reversible pump assembly that uses an internal hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations, as well as two different pump sizes.
SeaStar PA6020 Attributes- Input Voltage: 12 volts
- Maximum pressure rating: 1000 PSI
- Ampere Rating: 5A to 11A
- Cy Capacitylindre: 12.5 to 21 cubic inches
- Flow rate: 100 cubic inches per minute
- Wire Length: 24 Feet
- Converts from manual hydraulic steering in power steering
- Dramatic reduction in steering wheel torque
- OEM or retrofit
- Compatible with electric bleeding system
- Protected against ignition
- ABYC, CE, NMMA, ISO 10592 approved
- Easy to install
- One year limited warranty
- pas3-SeaStar_power_assist_autopilot.pdf
Seastar PA6020 Power Assisted Autopilot Pump
Model: PA6020- Autopilot ready — one-time installation (i.e. no need to enter the system to install the pump).
- Converts steering manual hydraulic in dPower assisted steering.
- Dramatic reduction in steering wheel torque.
- Easy installation.
- OEM or Retrofit.
- Simple addition to an existing SeaStar manual system (1.4 to 2.4 SeaStar bar pumps)
- Compatible with Powerr purge system.
- Protected ignition (SAE J-1171).
- ABYC, CE, NMMA, ISO 10592 approved.
- Replaces others 12 and 24 volts.
Converts manual hydraulic steering for a dramatic reduction in steering wheel torque and at the same time provides a pump for an autopilot installation.
The autopilot pump SeaStar Power Assist is the standard power assist product with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot Pump is a fixed flow reversible pump assembly that uses a hydraulic gear pump internal, producing very little vibration or noise. It is offered in 12 and 24 configurationsvolts, as well as in two different pump sizes (type 1 and type 2).
Specifications| Voltage | 12vDC |
| Connections | Compatible with standard SeaStar hoses (HO51xx etc.) |
| Oil Compatibility | SeaStar Steering Fluid (MIL 5606 ) |
| Autopilot Pump Sizes | 60 in3/min (no load) |
| Maximum pressure | 1000psi |
| Typical current consumption (depending on application) | 5 - 11 amps |
| Pump Cylinder Capacity | 12.5 cu in — 21 cu in |
Seastar PA6020 Electrically Assisted Autopilot Pump Model: The PA6020 autopilot is single installation ready (i.e. it is not necessary toe enter the system to install it). the pump). Convert manual hydraulic steering to power steering. Steering wheel torque is significantly reduced. Easy installation. OEM or refurbished. Simply add to existing SeaStar manual system (from SeaStar 1.4-2.4 helm pump) to be compatible with the power purification system. Protection against ignition (SAE J-1171). ABYC, CE, NMMA, ISO 10592 certification passed. Replace other 12V and 24V systems. Convert manual hydraulic steering to significantly reduce steering wheel torque while still providing pumps for automatic driving devices. The SeaStar power-assisted auto-drive pump is a standard power-assisted product, and a Type 1 or 2 auto-drive pump is added. The SeaStar Autopilot pump is a group of reversible fixed flow pumps using an internal hydraulic gear pump, which ggenerates little vibration or noise. It offers 12 volt and 24 volt configurations, as well as two different pump specifications (type 1 and type 2). The 12V DC voltage connector is compatible with standard SeaStar hoses (HO51xx, etc.). Oil Compatibility SeaStar Steering Fluid (MIL 5606) Autopilot Pump Specifications 60 in3/min (no load) maximum pressure 1,000 psi typical current (depending on application) 5-11 amps Autopilot Cylinder Capacity pump 12.5 in3 × 21 in3
Frequently Asked Questions (FAQ) about Seastar PA6020 Power Assist T2 12v Autopilot Pump Who is the Seaview?
How to describe the Seastar PA6020 Power Pump automatic assistance pilot T2 12v?
Who is the Seaview? Working closely with all major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sail boats, pleasure boats and more.commercial. Seaview has added a hard anodizing process before powder coating to ensure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry. How to describe the Seastar PA6020 T2 12v Electrically Assisted Autopilot Pump? Seastar PA6020 Power Assisted Autopilot Pump Model: The PA6020 autopilot is ready to install in one go (i.e. no entry into the system is required to install the pump ). Convert manual hydraulic steering to power steering. Steering wheel torque is significantly reduced. Easy installation. OEM or refurbished. Simply add to existing SeaStar manual system (from SeaStar 1.4-2.4 helm pump) to be compatible with the power purification system. Ignition protection (SAE J-1171). ThisABYC, CE, NMMA, ISO 10592 certification passed. Replace other 12V and 24V systems. Convert manual hydraulic steering to significantly reduce steering wheel torque while providing pumps for automatic steering devices. The SeaStar power-assisted auto-drive pump is a standard power-assisted product, and a Type 1 or 2 auto-drive pump is added. The SeaStar Autopilot pump is a fixed flow reversible pump group using an internal hydraulic gear pump, which generates little vibration or noise. It offers 12 volt and 24 volt configurations, as well as two different pump specifications (type 1 and type 2). The 12V DC voltage connector is compatible with standard SeaStar hoses (HO51xx, etc.). Oil Compatibility SeaStar Steering Fluid (MIL 5606) Autopilot Pump Specifications 60 in3/min (no load) maximum pressure 1,000 psi coTypical current (depending on application) 5-11 amps Pump cylinder capacity 12.5 in3 × 21 in3
- Seastar PA6020 Automatic Power AssistPilot Pump Model: PA6020
- The Autopilot ready pump is a one-time installation. No need to enter the system to install the pump.
- Drastic reduction in manual steering required, so you can spend more time on the water and less time at the helm.
- Seastar PA6020 Electric Power Assist Autopilot Pump, Model: PA6020
- Easily converts manual hydraulic steering to power steering
- Dramatic reduction in operator fatigue, increased productivity
Save $1,213 when you purchase the Electricly Assisted Autopilot Pump Seastar PA6020 T2 12vfor only $1,889 at NVN Marine! Free same day delivery before 3 p.m.Seastar PA6020 T2 12v Electrically Assisted Autopilot Pump Technical Specifications
| Type: | Navigation & Marine Instruments | Autopilots |
|---|---|
| Seller: | Seaview |
| Weight: | 5.0 lbs |
| Shipping Weight: | 5.0 lbs |
|---|---|
| Box sizes: | 1.00 (h) x 1.00 (w) x 1.00 (w) |
| Cubic feet: | 1.0 |
| Returnable: | Yes |
| USPS First Class: | Yes |
| P65: | Yes |
For conditions detailed shipping instructions, seePlease review our shipping policy and you can find our return and refund policy here.
