Seaview PMADM4M1 Dual Mount Rear Rake Requires Top Plate Marine Navigation & Instruments

Attributes of the Seaview PMADM4M1

Seaview PMA-DM4-M1 Compact Dual Mount

Model: PMA-DM4- M1

Mount your satdome, camera or other marine electronics above your radar using a Seaview dual mount. This ensures maximum performance of your electronic devices and eliminates radar interference. The lower mounting plate is pre-drilled to fit all closed dome radars, while the upper mounting plate is modular and sold separately. The hollow oval mast section allows for easy cable management.

Specially designed not to take up a large amount of space, it is the perfect solution where space saving is essential.

A dual mount gives your radar or satdome extra height to tower over anything that might obstruct its view, while maintaining a small footprint. This also allows all electronic cables to bepass through a single hole for a cleaner installation.

Choose the appropriate top plate sold separately. The top deck is where you bolt on the top plate. Seaview developed the top plate to make product selection easier for the customer and improve the appearance of these racks. The days of top plates with many holes drilled into them are long gone.

Double modular base, MFG#PMA-DM4-M1, bottom plate is used for radomes 18-24, and the top plate is used for thermal cameras or projectors. . .
PRODUCT ID: 1001528
SKU: NVN-1001528
CSKU: CWR-1001528
REWRITE: 1012639-seaview-pmadm4m1-dual-mount-aft-rake-requires
MPN: PMADM4M1
UPC: 727908835137
ASIN:
WSKU: SVWPMADM4M1
SSKU: SVW-PMA-DM4-M1
KSKU: SVWPMADM4M1
GSKU:
MSKU:
LSKU:
NAME: Seaview PMADM4M1 Dual Mount Rear Rake Requiresa top plate
NAME_EX:
PTITLE: Seaview PMADM4M1 Dual Mount Stern Rake requires a top plate
TYPE: Navigation & Marine Instruments | Instruments
SELLER: Seaview

Seaview-PMA-DM4-M1-Dual-Mount

Gtags:

GSpecs:

Seaview PMADM4M1 Dual Mount Rear Rake Requires Top Plate Product Description Seaview PMADM4M1 Attributes

Seaview PMA-DM4-M1 Compact Dual Mount

Model: PMA-DM4-M1

Mount your satellite, camera or other marine electronics above your radar using a Seaview Dual Mount. This ensures maximum performance of your electronic devices and eliminates radar interference. The lower mounting plate is pre-drilled to fit all closed dome radars, while the upper mounting plate is modular and sold separately. The hollow oval mast section allows for easy cable management.

Specially designed not to take up a large amount of space, it is the perfect solution where space saving is essential.

A dual mount gives your radar or satdome extra height to tower over anything that mightobstruct your view, while maintaining a small footprint. This also allows all electronic cables to pass through a single hole for a cleaner installation.

Choose the appropriate top plate sold separately. The top deck is where you bolt the top plate. Seaview developed the top plate to make product selection easier for the customer and improve the appearance of these racks. The days of top plates with many holes drilled into them are long gone.

Double modular base, MFG#PMA-DM4-M1, bottom plate is used for radomes 18-24, and the top plate is used for thermal cameras or projectors. . .

Frequently Asked Questions (FAQ) about the Seaview PMADM4M1 Dual Mount Rear Rake requiring a top plate. Who is the Seaview? How to describe the Seaview PMADM4M1 dual mount rear rake requiredt a top plate?
Who is the Seaview? Working closely with all major electronics manufacturers, Seaview offers an innovative range of high quality products for power and sail, recreational and commercial boats. Seaview has added a hard coat anodizing process before powder coating to ensure superior durability and corrosion protection against discharge. Seaview is dedicated to providing quality products with the highest level of service in the industry. How to describe the Seaview PMADM4M1 dual mount rear rake requiring a top plate? Dual modular base, MFG#PMA-DM4-M1, the bottom plate is used for 18-24 radomes and the top plate is used for thermal cameras or projectors. . .

Keep your electronic devices safe and dry
Mount your radar above the waterline toget the best performance
Eliminate the need for a boring mast or pole. which can be complicated to install

The Seaview Dual Bracket is the perfect solution for mounting your radar, camera or other marine electronic device above of your radar.
The dual mount is designed for maximum performance and to eliminate radar interference.

The Seaview PMADM4M1 dual mount is a great way to place your radar and other equipment on a boat. It's compact and easy to install, so you can get the most out of your marine electronics.

Save $201 when you purchase the Rake Seaview PMADM4M1 Dual Mount Rear Requires Top Platefor only $1,664 from NVN Marine! Fast, free same-day delivery before 3 p.m. Seaview PMADM4M1 Dual Mount Rear Rake Requires Top Plateieure Technical specifications

Type:	Navigation and marine instruments \| Instruments
Supplier:	Seaview
Weight:	18.0 lbs

Seaview PMADM4M1 Dual Mount Rear Rake Requires Top Plate User ReviewsRake Dual Mount Rear Seaview PMADM4M1 Requires shipping and return of top plate

Shipping Weight:	18.0 lbs
Box sizes:	1.00 (h) x 1.00 (w) x 1.00 (w)
Cubic feet:	1.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes
Delivery by truck:	Yes

For shipping conditionsdetailed, please see our shipping policy and you can find our return and refund policy here.