Shurflo by Pentair Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing Marine Plumbing & Ventilation

Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing

The Shurflo standard ballast pump was specifically designed and developed for marine applications. High capacity ballast in ski and wake boat applications, offering rapid fill and drain rates in an easily adaptable configuration, capable of operating on a 25 amp circuit. The high-output, high-torque motor, combined with a high-modulus neoprene compound impeller, provides fast priming, long life and consistent performance. Close internal tolerances help reduce leaks when the pump is mounted below the ballast tank. The standard ballast is built on the latest Shurflo motor series which features fully sealed die-cast end bells, electro-coated finish throughout and a steel mounting plate for reliable performance.t durability in engine compartment conditions.

Features:

2 VDC sealed corrosion resistant electro-coated motor
14 AWG lead wires
Reversible F Lexible impeller
Bronze pump body
Self-priming up to 4 feet vertically
Ports: ½" internal pipe thread,
1" Barbed external pipe
Ignition protected
CE and IMCI certified

Pump Design:

Type: Reversible Flexible Impeller
Ports: Internal Pipe Thread ½", 1" external barb
Liquid: 200°F [93°C] Max
Prime: 4 feet [1.2M]
Dry running: not recommended

Electric:

Motor: 12 V DC permanent magnet,
Intermittent service
Protection: Requires external fuse (not supplied)
Cables (red): 14.5" [0.36M] é14 AWG tin plated
Cables (black): 12.5" [0.31 M] 14 AWG tin plated
Fuse: 25 A fuse recommended
Check : No control – External switch required

Materials:

Housing: Bronze
Wheel: Neoprene
Hardware: Brass/Stainless Steel

Agency Approvals:

Electrical Standards USCG 183.410
ISO 8846 Marine for PROTECTION AGAINST IGNITION on gasoline-powered vessels
CE and IMCI certification

The fuel pump Pentair Shurflo standard ballast is specially designed and developed for the application of large capacity ballast tanks in ski and wake boats. It can provide rapid water injection and drainage...
PRODUCT ID. : 69000
SKU: NVN-69000
CSKU: CWR-69000
REWRITE: 80111-shurflo-by-pentair-standard-flow -marine ballast
MPN: 3300-101
UPC: 752324330997
ASIN: B07BHKQRL3
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Shurflo by Pentair Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing
br> EX_NAME: SHURFLO MARINE BALLAST PUMP 12 GPM 12 VDC BRONZE HOUSING
PTITLE: Shurflo by Pentair Standard Flow Marine Ballast Pump, 12 GPM and 12 VDC, BronzeHousing
TYPE: Marine Plumbing & Ventilation | Transfer Pumps
SELLER: Shurflo by Pentair
HARDWARE> HARDWARE PUMPS> UTILITY PUMPS
Sports
SHURFLO Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing
Shurflo By Pentair Standard Flow Marine Ballast Pump 12 Gpm 12 Vdc by Hodges Marine
Sports
Gtags:

GSpecs:

Shurflo by Pentair Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing Product Description

Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing

The Shurflo Standard Ballast Pump was specifically designed and developed for high capacity ballast applications in ski and wake boats, providing rapid fill and drain rates in an easily adaptable configuration , capable of operating on a 25 A circuit. The high-efficiency, high-torque motor, combined with a high-modulus neoprene compound impeller, provides rapid priming, long life and consistent performance. Close internal tolerances help reduce leaks when the pump is mounted below the ballast tank. The standard ballast is built on the latest Shurflo engine series which features fully sealed die-cast end bellss, electro-coated finish throughout and a steel mounting plate for reliable performance and durability in engine bay conditions.

Features:

2V DC Corrosion Resistant Sealed Electroplated Coated Motor
14 AWG Lead Wires
Reversible Flex Hole
Bronze Pump body
Self-priming up to 4 feet vertically
Ports: ½" internal pipe thread,
1" external pipe barb
Protected against ignition
CE and IMCI certification

Pump design:

Type: Reversible Flex Wheel
Ports: ½" internal pipe thread, 1" external barb fitting
Liquid: 200°F [93°C ] maximum
Start: 4 feet [ 1.2 M]
Dry running: not recommended

Electric:

Motor: 12 V DC permanent magnet,
Intermittent service
Protection: Requires external fuse (not supplied)
Wires (red): 14.5" [0.36M] 14 AWG tinned
li>
Wires (black): 12.5" [0.31M] tinned 14 AWG
Fuse: 25A fuse recommended
Control: No control – External switch required

Materials:

Housing: Bronze
Wheel : Neoprene
Material: Brass/Stainless Steel

Agency Approvals:

Electrical Standards USCG 183.410
ISO 8846 Marine for IGNITION PROTECTION on Gasoline Vessels
CE and IMCI Certification

The Pentair Shurflo standard ballast pump is specially designed and developed for the application of large capacity ballast tanks in ski and wake boats. It can provide rapid water injection and drainage...

Shurflo by Pentair Standard Flow Marine Ballast Pump -12 GPM and 12 VDC - Bronze Housing Related ProductsJohnson Pump Polarity Reversal Switch for F4B-11 Pump

Frequently Asked Questions (FAQ) About the Pentair Shurflo Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing Who is the Pentair Shurflo? How to Describe the Shurflo by Pentair Standard Flow Marine Ballast Pump standard – 12 GPM and 12 VDC – Bronze housing?
WhWhat is the operating voltage of the product?
What is the operating capacity of the product (GPM)?
Who is Shurflo from Pentair? At Shurflo by Pentair, we believe that the health of our world depends on reliable access to clean water. Pentair offers a comprehensive range of smart, sustainable water solutions to homes, businesses and industries around the world. The industry's leading and proven portfolio of solutions enables individuals, businesses and industrye to access clean and safe water, reduce their water consumption, as well as recover and reuse it. Pentair helps ensure water is clean when returned to the environment. How to describe the Shurflo by Pentair Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing? The Pentair Shurflo Standard Ballast Pump is specifically designed and developed for the application of large capacity ballast tanks in ski and wake boats. It can provide rapid water injection and drainage...What is the working voltage of the product? 12v What is the product's working capacity (GPM)? 12 GPM

Save $128 when you purchase the Shurflo by Pentair Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing for only $360 from NVN Marine! Same day dispatch before 3 p.m. Shurf Standard Flow Marine Ballast Pumplo by Pentair - 12 GPM and 12 VDC - Bronze Housing Technical Specifications

Type:	Marine Plumbing and Ventilation \| Transfer Pumps
Supplier:	Shurflo by Pentair
Weight:	6.55 lbs
Gallons per minute:	12 GPM
Reversible:	Yes
Volts:	12v
User Guide:	Download PDF

Shurflo by Pentair Standard Flow Marine Ballast Pump - 12 GPM and 12 VDC - Bronze Housing User ReviewsShurflo by Pentair Pump Standard Flow Marine Ballast Tank - 12 GPM and 12 VDC - Bronze Housing Shipping & Returns

Shipping Weight:	6.55 lbs
Box sizes:	5.00 (h) x 6.00 (w) x 12.00 ( l)
Pcubic feet:	360.0
Returnable:	Yes