SI-TEX SP-70 Second Station Kit with 30' Cable Marine Navigation & Instruments

SP-70 Autopilot Second Station Kit

Complete Remote 2nd Station for SP-70
Includes 30' of cable
Laptop with clip mount
br>
Features:

The ultra-compact, waterproof control unit features an easy-to-use keypad and a large LCD display showing heading, rudder angle, operating mode and error messages
Control unit can be used as a dashboard-mounted keypad or removed Quickly and easily from the mounting bracket to be used as a handheld device
Exceptionally easy to use - Simply point it to the desired heading, press the PILOT key and the system takes over
Integrated NMEA-0183 Loran/GPS interface for precise navigation along routes
Bold, backlit displays with ten brightness levels for clear reading qin any light
Digital displays of rudder angle and operating mode provide up-to-date operating status
Automatic steering controls Sea condition and trim and ten levels of selectable rudder sensitivity
High and low speed settings for smooth, precise steering.
Ruler feedback verifies autopilot commands
Phantom rudder backup allows the autopilot to use rudder movement memory to calculate new movements in case of rudder feedback failure
/li>
Heading output can be used to stabilize the radar overlay on chartplotters using the heading function radar overlay
Integrated diagnostics and self-tests, as well as visual and audible alarms
Includes 30' of cable

Second driver station kit aautomatic SP-70, for the second complete remote station of the SP-70, including 30 cable handhelds, with clip installation function: ultra-compact and waterproof control unit, with simple keypad and large LCD display. The display screen can show heading, rudder angle, operating mode and error messages. The control unit can be used as a keypad for dashboard installation, or it can be quickly and easily removed from the bracket. Support for use as a portable device. Very simple to use: just rotate it in the desired direction, press the PILOT button and the system will take over. In the Loran/GPS interface of NMEA-0183, precise navigation can be carried out throughout the route. The backlit display screen with ten brightness levels can clearly read the rudder angle and digital operating mode display under any light.carries what light. It can provide the latest operating status, automatic ocean state and trim control, as well as ten optional rudder sensitivity settings at high and low speeds to achieve smooth and precise steering. Steering feedback check Autopilot control Phantom rudder backup allows the autopilot to use the rudder movement memory to calculate new movements in the event of steering feedback failure, as well as providing visual and audible alerts, including including 30 SI-TEX SP with 30 Cables - 70 Second Cable Station Kit This product is new, unopened and sealed in its original packaging box.
PRODUCT ID: 45234
SKU: NVN-45234
CSKU: CWR-45234
REWRITE: 56345-si-tex-sp-70-second-station-kit-w-30-cable
br> MPN: 10080035
UPC: 010407610214
ASIN: B01J4YV6G4
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: SI - SITEX SP-70 Second Station Kit with 30' Cable
NAME_EX: SITEX SP70 SECOND STATION KIT with 30' Cable
PTITLE: SI-TEX SP-70 Second Station Kit with 30' cable
TYPE: Navigation and maritime instruments | Autopilots
SUPPLIER: SI-TEX
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER STEERING PARTS> POWERWATER STEERING CABLES
Sports
Si -tex SP-70 Second Station Kit with 30' Cable
SI-TEX SP-70 Second Station Kit with 30' Cable
Sports
br> Gtags:

GSpecs:

SI-TEX SP-70 Second Station Kit with 30' Cable Product Description SP-70 Autopilot Second Station Kit

Complete Remote 2nd Station for SP-70
Includes 30' of handheld cable with clip holder

Features:

Ultra- compact and waterproof has simple operation via keypad and large LCD display showing heading, rudder angle, operating mode and error messages
The control unit can be used as a dashboard-mounted keypad or quickly and easily removed from the mounting bracket for use as a portable device
Exceptionally easy to use - Simply point in the desired direction, press the PILOT button and the system takes over
Integrated NMEA-0183 Loran/GPS interface for precise road-line navigation along routes
Bold backlit displays with ten brightness levels for clear reading in any light
Digital displays of rudder angle and operating mode give up-to-date operating status
Automatic Sea state and trim controls and ten selectable levels of rudder sensitivity
High and low speed settings for smooth, precise steering.
Ruler feedback verifies autopilot commands
Phantom rudder backup allows the autopilot to use rudder movement memory to calculate new movements in case of rudder feedback failure
/li>
Heading output can be used to stabilize the radar overlay on chartplotters using the heading function radar overlay
Integrated diagnostics and self-tests, as well as visual and audible alarms
Cincludes 30' of cable

SP-70 Autopilot Second Station Kit, for the complete SP-70 remote second station, includes 30 handhelds cables, with clip installation function: ultra-compact and waterproof control unit, with simple keypad and large LCD display. The display screen can show heading, rudder angle, operating mode and error messages. The control unit can be used as a keypad for dashboard installation, or it can be quickly and easily removed from the mounting bracket for use as a portable device. Very simple to use: just rotate it in the desired direction, press the PILOT button and the system will take over. In the Loran/GPS interface of NMEA-0183, precise navigation can be carried out throughout the route. The backlit display screen with ten brightness levels makes it easy to read clearly.t rudder angle and digital operating mode display in any light. It can provide the latest operating status, automatic ocean state and trim control, as well as ten optional rudder sensitivity settings at high and low speeds to achieve smooth and precise steering. Steering feedback check Autopilot control Phantom rudder backup allows the autopilot to use the rudder movement memory to calculate new movements in the event of steering feedback failure, as well as providing visual and audible alerts, including including 30 SI-TEX SP with 30 Cables - 70 Second Cable Station Kit This product is brand new, unopened and sealed in its original factory packaging box.

Frequently Asked Questions (FAQ) for SI-TEX SP-70 Second Station Kit with 30' Cable Who is SI-TEX?
How to describe SI-TEX SP- 70 Secondsd Station kit with 30' cable?
What is the type of product?
Who is SI-TEX? There's an old saying: "If it ain't broke, don't fix it!" » This perfectly sums up the SI-TEX philosophy. With solid products built in the SI-TEX tradition of simplicity, performance and reliability, as well as friendly and responsive technical support, the SI-TEX business b> has continued to grow. SI-TEX is committed to developing new products based on how customers actually use their boats, rather than just piling on a bunch of expensive bells and whistles for the sake of it. marketing. How to describe SI- TEX SP-70 Second Station Kit with 30' Cable? SP-70 Autopilot Second Station Kit, for the complete remote second station of the SP-70, including 30 portable cCapable, with clip installation function: ultra-compact and waterproof control unit, with clasimple life and large LCD screen. The display screen can show heading, rudder angle, operating mode and error messages. The control unit can be used as a keypad for dashboard installation, or it can be quickly and easily removed from the mounting bracket for use as a portable device. Very simple to use: just rotate it in the desired direction, press the PILOT button and the system will take over. In the Loran/GPS interface of NMEA-0183, precise navigation can be carried out throughout the route. The backlit display screen with ten brightness levels can clearly read the rudder angle and digital operating mode display under any light. It can provide the latest operating status, automatic ocean and trim status control, as well as ten optional rudder sensitivity settings at high and lowe speed to obtain smooth and precise steering. Steering Feedback Check Autopilot cCommand Ghost rudder backup allows the autopilot to use the rudder movement memory to calculate new movements in the event of rudder feedback failure, as well as providing visual and audible alerts, including 30 SI-TEX SP with 30 Cables -70 Second Station Kit Cable This product is new, unopened and sealed in its original packaging box. What is the type of product? Parts

Save $191 when you purchase the SI-TEX SP-70 Second Station Kit with 30' Cable for only $558 from NVN Marine! Same day dispatch before 3 p.m. SI-TEX SP-70 Second Station Kit with 30' Cable Technical Specifications

Type:	Marine Navigation & Instruments \| Autopilots
Supplier:	SI-TEX
Weight:	1.6 lbs
Type :	Parts
User Guide:	Download PDF
Product Manual:	Download PDF
Product brochure:	Download PDF
Product installation:	Download the PDF

SI-TEX SP-70 Second Station Kit with 30' Cable User ReviewsSI-TEX SP-70 Second Station Kit with 30' cable Shipping & Returns

Shipping Weight:	1.6 lbs
Box sizes:	2.00 (h) x 10.00 (w) x 13.00 (w)
Cubic feet:	260.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policyon and you can find our return and refund policy here.