Sika Sikaflex 292i - White - 10 oz Tube with Nozzle Boat Outfitting

Sikaflex 291i - White - 10 oz tube with nozzle

Sikaflex-292i is a non-sag, one-part polyurethane adhesive with a thixotropic, paste consistency that hardens when applied. exposure to atmospheric humidity. It has excellent adhesive properties and good mechanical resistance. Sikaflex-292i meets the low flame spread requirements established by the International Maritime Organization (IMO).

Features:

Good filling properties
Can be painted
Adheres well a wide variety of substrates

Areas of application:

Sikaflex-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable for bonding metals including aluminum (including anodized finishes), metal primers and paint coatings (2-part systems), orceramic, plastic materials such as GRP (unsaturated polyester resin), ABS, etc. Seek advice from the manufacturer and carry out tests on original substrates before using Sikaflex-292i on materials subject to stress cracking. This product is only suitable for experienced professional users. Testing with substrates and real-world conditions should be performed to ensure adhesion and material compatibility.

Advantages:

Good filling properties
Can be painted
Adheres well a wide variety of substrates
Wheelmark approved
Solvent-free and very low VOCs

Surface preparation:

Surfaces must be clean, dry and free of grease, oil and dust. The surface treatment depends on the specific nature of the supports and is crucial for a lasting bond. Suggestions forsurface preparation can be found in the current edition of the appropriate Sika Pretreatment Table.

Consider that these suggestions are based on experience and should in any case be verified by testing on substrates original.

Application:

Sikaflex-292i can be used between 10°C and 40°C (climate and product) but changes in Responsiveness and application properties must be taken into account. The optimal temperature for the support and the sealant is between 15°C and 25°C. Consider that viscosity will increase at low temperatures. For easy application, condition adhesive at room temperature before use.

Tooling and Finishing

Tooling and finishing should be done in the skin time of the sealer. It is recommended to use Sika Tooling Agent N. The suitability and compatibility of other finishing agents should be tested.tees before use.

Removal

Uncured Sikaflex-292i can be removed from tools and equipment with Sika Remover-208 or other suitable solvent. Once hardened, the material can only be removed mechanically. Hands and exposed skin should be washed immediately using Sika Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on skin.

PRODUCT ID: 92118
SKU: NVN-92118
CSKU: CWR-92118
REWRITE: 103229-sika - sikaflex-292i-white-10oz
MPN: 577359
UPC: 7612895495279
ASIN: B08C1YQ5V9
WSKU:
SSKU:
KSKU:
GSKU:
MSKU :
LSKU:
NAME: SIKA SIKAFLEX 292I WHITE 10 OZ WITH NOZZLE
NAME_EX:
PTITLE: Sika Sikaflex 292i - White - 10 oz tube with nozzle
TYPE: Boat outfitting | Adhesives/Sealants
SUPPLIER: Sika
HARDWARE> SUPPLIESCONSTRUCTION> PROTECTIVE COATINGS AND SEALANTS

Gtags:

GSpecs:

Sika Sikaflex 292i - White - 10 oz Tube with Nozzle Product Description

Sikaflex 291i - White - 10 oz Tube with Nozzle

Sikaflex-292i is an anti-sagging product Single-component polyurethane adhesive with a thixotropic and pasty consistency, hardening on contact with atmospheric humidity. It has excellent adhesive properties and good mechanical resistance. Sikaflex-292i meets the low flame spread requirements established by the International Maritime Organization (IMO).

Features:

Good filling properties
Can be painted
Adheres well a wide variety of substrates

Areas of application:

Sikaflex-292i is suitable for structural joints in marine constructions which will be subjected to high dynamic stresses. It is suitable for bonding metals, particularly aluminum (including anodized finishes), dMetal primers and paint coatings (2-component systems), or ceramic materials, plastics such as GRP (cured polyester resin), ABS, etc. Seek advice from the manufacturer and carry out tests on the original substrates before using Sikaflex-292i on materials prone to stress cracking. This product is only suitable for experienced professional users. Testing with substrates and real-world conditions should be performed to ensure adhesion and material compatibility.

Advantages:

Good filling properties
Can be painted
Adheres well a wide variety of substrates
Wheelmark approved
Solvent-free and very low VOCs

Surface preparation:

Surfaces must be clean, dry and free of grease, oil and dust. Surface treatment depends onthe specific nature of the supports and is crucial for a lasting bond. Suggestions for surface preparation can be found in the current edition of the appropriate Sika pretreatment table.

Consider that these suggestions are based on experience and should in any case be verified by specialists. tests on original supports.

Application:

Sikaflex-292i can be used between 10°C and 40°C (climate and product) but changes in responsiveness and application properties must be taken into account. The optimal temperature for the support and the sealant is between 15°C and 25°C. Consider that viscosity will increase at low temperatures. For easy application, condition adhesive at room temperature before use.

Tooling and Finishing

Tooling and finishing should be done in the skin time of the sealer. It is recommended to use Sika Tooling Agent N. Other finishing agents should be tested for suitability and compatibility before use.

Removal

Uncured Sikaflex-292i can be removed from tools and equipment with Sika Remover-208 or other suitable solvent. Once hardened, the material can only be removed mechanically. Hands and exposed skin should be washed immediately with Sika Cleaner-350H cleaning cloths or a suitable industrial hand cleaner and water. Do not use solvents on the skin.

Frequently asked questions (FAQ) About SIKA SIKAFLEX 292I WHITE 10 OZ WITH NOZZLE Who is Sika?
Who is Sika? Sika is a leading supplier of specialty chemicals and industrial materials to the construction and industrial markets, including transportation, marine and automotive. Its technologies are focused on sealing, bonding, amoroasting, strengthening and protection. Sika product lines include roofing, concrete admixtures, specialty mortars, epoxies, structural reinforcement systems, industrial flooring, sealants, adhesives, specialized acoustic and reinforcement materials.

Save $7 when you purchase the Sika Sikaflex 292i - White - 10 oz Tube with Nozzle for only $17 from NVN Marine! Same day dispatch before 3 p.m. Sika Sikaflex 292i - White - 10 oz Tube with NozzleTechnical Specifications

Type:	Boat Equipment \| Adhesives/Sealants
Supplier:	Sika
Weight:	1.0 lbs
User Guide:	Download PDF

Sika Sikaflex 292i - White - 10 oz tube with nozzle User reviewsateursSika Sikaflex 292i - White - 10 oz Tube with Nozzle Shipping & Returns

Shipping Weight:	1.0 lbs
Box sizes:	2.00 (h) x 2.00 (w) x 12.00 (w)
Cubic feet:	48.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy 'shipping and you will find our conditions of return and refund. Funds policy here.