Swivel base for RAM Mount composite handlebars Ram Mount Store

RAM Composite Handlebar Swivel Base

The high strength RAM composite rail mount consists of a locking tooth system with a standard diamond plate end. The bracket accommodates rails up to 1" in diameter. The hole pattern found on the diamond base adapter will connect to most RAM brackets.

Installation Instructions:
To mount on a circular rail, simply press the plastic "U" clamp around the rail, then connect and tighten the small nut and bolt to close the U clamp. Then connect the plate plate to the clamp mounted at the required angle and screw the other bolt through the diamond plate. You are now ready to connect any RAM composite or other cradle with two holes positioned 1.912" center to center. . Placing a rubber liner (not included) between the tube and the bracket for a tube less than 1" in diameter helpsra the base to grip the rail.

Material:
High strength composite

Note:
The "U" in the part is numb reflects the Product packaged in a polyethylene bag. You cannot rotate the diamond plate on the U-clamp when the holder is connected.

The RAP-274U high strength composite rail mount from Ram Mounts consists of a locking tooth system with standard diamond plate ends. The bracket accommodates...
PRODUCT ID: 42409
SKU: NVN-42409
CSKU: CWR-42409
REWRITE: 53520-ram-mount-composite-handlebar-swivel-base
MPN: RAP-274U
UPC: 793442802744
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: RAM MOUNT COMPOSITE HANDLEBAR SWIVEL BASE
EX_NAME: RAM MOUNT COMPOSITE HANDLEBAR SWIVEL BASE
PTITRE: RAM MOUNT Composite Handlebar Swivel Base
TYPE: Ram Mount Store | Rail brackets/handlebar
SELLER: RAM Mounting Systems
ELECTRONICS> GPS ACCESSORIES

Rap-274u

Gtags:

RAM supports
Handlebar

GSpecs:

RAM Mount Composite Handlebar Swivel Base Product Description RAM Composite Handlebar Swivel Base

The high strength RAM composite rail mount consists of a locking tooth system with one end of standard diamond plate. The bracket accommodates rails up to 1" in diameter. The hole pattern found on the diamond base adapter will connect to most RAM brackets.

Installation Instructions:
To mount on a circular rail, simply press the plastic "U" clamp around the rail, then connect and tighten the small nut and bolt to close the U clamp. Then connect the plate plate to the clamp mounted at the required angle and screw the other bolt through the diamond plate. You are now ready to connect any RAM composite or other cradle with two holes positioned 1.912" center to center. . Place a rubber covering (not included) betweenthe tube and support for a tube with a diameter less than 1" will help the base grip the rail.

Material:
High strengthgth Composite

Note:
The "U" in the part number reflects the product packaged in a poly bag You cannot rotate the diamond plate on the U clamp when the holder is. connected

The RAP-274U high-strength composite rail mount from Ram Mounts consists of a locking tooth system with standard diamond plate ends. The mount accommodates...

Frequently Asked Questions (FAQ) about RAM Mount Composite Handlebar Swivel Base Who is RAM Mounting Systems?
How to describe RAM Mount Composite Handlebar Swivel Base?
Who are the RAM mounting systems? RAM stands for Round-A-Mount and started in 1995. Using the finest assembly hardware, durable composites, steel, stainless steel, rubberand aluminum, our mounting bases and complete kits are manufactured to perform above expectations and remain cost effective. . For your next editing application, choose wisely. Choose RAM.How to describe the RAM MountBase Composite Handlebar Pivot? The Ram Mounts RAP-274U High Strength RAM Composite Rail Mount (New from Factory) consists of a locking tooth system with standard diamond plate ends. The mount accommodates...

Save $1 when you purchase the RAM Mount Composite Handlebar Swivel Base for just $7 from NVN Marine! Same day dispatch before 3 p.m. RAM Mount Composite Handlebar Swivel Base Videos RAM Mount Composite Handlebar Swivel Base Technical Specifications

Type:	Ram Mount Store \| Rail/Handlebar Mounts
Supplier:	RAM Mounting Systems
Weight:	0.1 lb
User Guide:	Download PDF
Product Manual:	Download PDF

RAM Composite Handlebar Swivel Base Mount User Reviews RAM Composite Handlebar Swivel Base Mount Shipping & Returns

Weight Shipping:	0.1 lbs
Box Sizes:	1.00 (h) x 1.00 (w) x 2.00 (l)
Cubic feet:	2.0
Returnable:	Yes
USPS First Class:	Yes