T-H Marine ATLAS 4 in. Recessed Hydraulic Jack Plate Boat Outfitting

The Atlas' revolutionary design meets the demands of today's high-performance outboards. The one-piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses of the heaviest and most powerful outboards, up to 300 horsepower on the market today. The entire hydraulic system is integrated into the jack, eliminating the need to install pumps and tanks inside the transom. The all-new hydraulic unit is also fast. Lifts from bottom to top in 8 seconds.

T-H Marine AHJ4VDP Attributes

Setback: 4 inches
Hydraulic lift: 5-3/4 inches
Total Rise: 8-1/4 inches to 9-3/4 inches
Horsepower: 300 horsepower
Adjustment: 7 inches vertical
Finish: Polished
Color: Silver
Material: Aluminum
With rocker switch: Yes
With relay harness: Yes

Features and beforeages of the T-H Marine AHJ4VDP

One-piece design
Featuring the innovative rod lift and slot system
300 horsepower maximum
Will handle the constraints of the heaviest and most powerful outboards
Limited lifetime warranty

ATLAS 4-inch recessed hydraulic jack plate polished

Designed for engines up to 300 hp or up to 625 pounds dry weight.

5 REASONS WHY YOU SHOULD CHOOSE L 'ATLAS™ HYDRAULIC JACK PLATE

ATLAS™ is truly the world's best hydraulic jack plate
ATLAS™ is factory installed by over manufacturers boats than any other plate
ATLAS™ is used by more professional fishermen than any other hydraulic jack plate
ATLAS™ is the best-selling hydraulic plate in the world – sold and serviced by more points of sale
The ATLAS™ hydraulic actuatoris made in the USA, while our competitors come from China

6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER

ATLAS™ is manufactured by T-H Marine/CMC, which was the FIRST to offer an actuator inside the jack – the competition copied
ATLAS™ has was the first plate to offer pre-drilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the design the competition can't do this
ATLAS™ was the first plate to include a heavy-duty safety cable to protect boaters from engine entry into the cockpit in the event of a breakdown
ATLAS™ was the first plate to offer very simple actuator replacement in the field
ATLAS™ was the first major development in the field of hydraulic cylinder platesfor over a decade – driving improvements in hydraulic cylinder plates

This high-tech, high-speed, one-piece design utilizes an innovative rod and groove that can cope with the pressure exerted by the heaviest and most powerful V6 outboard engine on the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks inside the beam and hydraulic hoses running through it.e beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. Lifting up and down in 8 seconds, installation time is only half that of similar jacks. Handles all outboard equipment, including the powerful Verado V6 engine. Atlas outboard hydraulic cylinder plate, Frustration Atlas est a new design that can meet the needs of today's high-performance outboard motors. This one-piece design featuring an innovative rod-and-groove lifting system can handle the pressure of the heaviest and most powerful V6 outboard engine on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam. The new hydraulic device is also very fast, lifting from bottom to top in 8 seconds! Up to 350 hp
PRODUCT ID: 81676
SKU: NVN-81676
CSKU: CWR-81676
REWRITE: 92787-t-h-marine-atlas-4-set-back-hydraulic
MPN: AHJ-4V-DP
UPC: 733572069402
ASIN: B00428HY7S
WSKU: THMAHJ4VDP
SSKU: THM-AHJ-4V-DP
KSKU: T9TAHJ4VDP
GSKU:
MSKU:
LSKU:
NAME: T-H Marine ATLAS Polished 4" Recessed Hydraulic Jack Plate
NAME_EX: T-H MARINE 4" Recessed HYDRAULIC JACK PLATEATLAS STD
PTITLE: T-H Marine ATLAS 4" Recessed Hydraulic Jack Plate
TYPE: Boat Equipment | SELLER: T-H Marine Supplies
br> VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS AND ACCESSORIES
Sports

T-H Marine ATLAS 4" Set Back Hydraulic Jack Plate Polished - AHJ -4V-DP
Sports
br>Gtags:

T-H Marine
Jack
Hydraulic

GSpecs :

T-H Marine ATLAS 4" Recessed Hydraulic Jack Plate Product Description

The revolutionary design of the Atlas meets the demands of today's high-performance outboard motors. The one-piece design, featuring the innovative rod and slot lift system, will handle the stresses of even the heaviest and heaviest engines. the most powerful outboards, up to 300 horsepower on the market today. The entire hydraulic system is integrated into the jack, eliminating the need to install pumps and tanks inside the transom. The all-new hydraulic unit also lifts from the bottom up. 8 seconds.

T-H Marine AHJ4VDP Attributes

Recoil: 4 inches
Hydraulic lift: 5-3/4 inches
Total lift: 8-1/4 inches to 9 -3/4 inches
Power: 300 horsepower
Adjustment: 7 inches vertical
Finish: Polished
Color: Silver
Material: Aluminium
With Rocker Switch: Yes
With Relay Harness: Yes

T-H Marine AHJ4VDP Features and Benefits

One-piece design
Featuring the innovative rod and slot lift system
Maximum power of 300 horsepower
Will handle the stresses of the heaviest and most powerful outboards
Limited lifetime warranty

ATLAS Hydraulic jack plate recessed 4" polished

Designed for engines up to 300 hp or up to 625 pounds dry weight.

5 REASONS FOR WHICH YOU SHOULD CHOOSE ATLAS™ HYDRAULIC JACK PLATE

ATLAS™ is truly the best hydraulic jack platedraulique in the world
ATLAS™ is factory installed by more boat manufacturers than any other plate
ATLAS™ is used by more professional anglers than any other plate hydraulic actuator
ATLAS™ is the #1 selling hydraulic plate in the world – sold and serviced by more outlets
The ATLAS™ hydraulic actuator is manufactured in the USA United, while our competitors come from China

6 WAYS THE ATLAS™ CAN CHANGE HYDRAULIC JACK PLATES FOREVER

ATLAS™ is manufactured by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate - the competition copied
ATLAS™ was the first plate to offer pre-drilling for shallow water anchors – the competition copied
ATLAS™ was the first and only plate that did not require regular grease lubrication – the designn competition can't do that
ATLAS™ was the first plate to include a heavy-duty safety cable to protect boaters from engine entry into the cockpit in the event of a breakdown
ATLAS™ was the first plate to offer a very simple safety cable. field actuator replacement
ATLAS™ was the first major development in hydraulic cylinder plates in over a decade, spurring the improvement of hydraulic cylinder plates

This high-tech, high-speed one-piece design uses an innovative rod-and-groove lifting system that can cope with the pressure exerted by the heaviest and longest V6 outboard engine. most powerful on the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks inside the beam and hydraulic hoses running through the beam. The ITges made from high-tech technical polymers have 6 times greater wear resistance than steel and are made from self-lubricating materials. Lifting up and down in 8 seconds, installation time is only half that of similar jacks. Handles all outboard equipment, including the powerful Verado V6 engine. Atlas Outboard Hydraulic Jack Plate, Frustration Atlas is a new design that can meet the needs of today's high-performance outboard engines. This one-piece design featuring an innovative rod-and-groove lifting system can handle the pressure of the heaviest and most powerful V6 outboard engine on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam. The new hydraulic device is also very fast, lifting from bottom to top in 8 seconds! Up to 350 hp

T-H Marine ATLAS 4" Recessed Hydraulic Ram Plate Related ProductsT-H Marine Replacement Relay Harness for Hydraulic Ram Plates 2014+

Fair to questions Questions (FAQ) about T-H Marine ATLAS 4" Polished Recessed Hydraulic Cylinder Plate Who is T-H Marine Supplies?
How to describe T-H Marine ATLAS 4" Polished Recessed Hydraulic Cylinder Plate?
What is the material of T-H Marine ATLAS 4" Set Back Hydraulic Jack Plate Polished?
What is the color of T-H Marine ATLAS 4" Set Back Hydraulic Jack Plate Polished?
What is the finish of the product?
What is the power of the product?
Who is T-H Marine Supplies? T-H Marine manufactures thousands of products in many categories, including outboard motor mounts, outboard tilt and trim, access hatches, deck plates, cover locks, deck hardware, livewell aeration, lead fittingsberie, battery trays, fishing rod holders, boat lights, rigging accessories, trolling motor accessories, pontoon boat parts and general boat accessories. How to describe T-H Marine ATLAS 4" Polished Hydraulic Recessed Jack Plate? This high-tech, high-speed, one-piece design uses an innovative rod-and-groove lifting system that can cope with the pressure exerted by the outboard engine. heaviest and most powerful V6 edge on the market. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks inside the beam and hydraulic hoses that pass through the jack. beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made of self-lubricating material. Lift up and down in 8 seconds, installation time is no more. than half of that ofsimilar jacks. Handles all outboard equipment, including the powerful Verado V6 outboard motor, Frust.ration Atlas is a new design that can meet the needs of today's high-performance outboard motors. This one-piece design featuring an innovative rod-and-groove lifting system can handle the pressure of the heaviest and most powerful V6 outboard engine on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam. The new hydraulic device is also very fast, lifting from bottom to top in 8 seconds! Up to 350 hp

Rated up to 300 hp or 625 pounds, ATLAS is the perfect jack plate for any engine.
Precision engineered with A sturdy and durable design, this jack plate will last a lifetime.
The ATLAS jack plate featureswith an ergonomic handle that makes lifting and maneuvering easier.
The ATLAS jack plate is designed for engines up to 300 hp or 625 pounds, making it the best jack plate hydraulic jack in the world.

Atlas Polished 4" Recessed Hydraulic Jack Plate
The AtlasThis is the best hydraulic jack plate in the world , with its sleek design and durability.
With a weight rating of up to 300 hp or 625 pounds dry weight, it is perfect for all engine sizes.
The Atlas is made from high quality steel that can support up to 10 tonnes of load without breaking.
It features a recessed design which makes it easier to work on engines in tight spaces.
li>

The ATLAS 4" Jack Plate is the best jack plate in the world. The ATLAS 4" Jack Plate is factory installed by over manufacturers of boats than any other plate. The plateThe ATLAS 4" Jack Plate is used by more professional anglers than any other jack plate.

What is the material of the T-H Marine ATLAS 4" Polished Recessed Hydraulic Jack Plate? Aluminum

Rated up to 300 hp or 625 pounds, ATLAS is the perfect jack plate for any engine.
Precision engineered with a rugged, durable, this jack plate will last you a lifetime.
The ATLAS jack plate features an ergonomic handle that allows for easy lifting and maneuvering.
The ATLAS jack plate is designed for engines up to 300 hp or 625 lbs, making it the world's best hydraulic jack plate.
Atlas 4" Polished Recessed Hydraulic Jack Plate
The Atlas is the world's best hydraulic cylinder plate, with its sleek design and durability.
With a weight rating of up to 300 hp or 625 lbs.dry, it is perfect for any size engine.
The Atlas is made from high quality steel that can support up to 10 tonnes of load without breaking.
It features a recessed design that makes it easier to work on engines in tight spaces.
Seamless integration with your boat's hydraulic system.
Designed to be the strongest and most reliable plate on the market. .
Comes with a lifetime warranty and is used by professional fishermen, so you can be sure it will last.
The world's best hydraulic jack plate.
li>
Factory installed by more boat manufacturers.
Used by more professional anglers.

What color is the T-H Marine ATLAS 4" Jack Plate hydraulic recessed polished?SilverWhat is the finish of the product?PolishedHow powerful is the hydraulic recessed jack plate?4 in. ATLASRine for only $1,379 from NVN Marine! Free same day delivery before 3 p.m. T-H Marine ATLAS 4" Hydraulic Recessed Jack Plate Technical Specifications

Type:	Boat Equipment \| Jack Plates
Seller:	T-H Marine Supplies
Weight:	52.0 lbs

T-H Marine ATLAS 4" Using the Hydraulic Cylinder Plate Retracted CommentsT-H Marine ATLAS 4" Recessed Hydraulic Jack Plate Shipping & Returns

Shipping Weight:	52.0 lbs
Box sizes:	7.00 (h) x 18.00 (w) x 21.00 (w)
Cubic feet:	2646.0
Returnable:	Yes
P65:	Yes

To know the conditions of eshipping details, please see our shipping policy and you can find our return and refund policy here.