T-H Marine ATLAS 8" Recessed Hydraulic Jack Plate - Gloss Black Anodized Boat Outfitting

TH Marine Atlas Hydraulic Jack Plate The ATLAS Hydraulic Jack Plate from T-H Marine is truly the next generation of jack plate design, designed for the heaviest and most powerful outboard motors on the market today , even the big four-strokes. Our innovative high-tech polymer rod and lift slot design ensures trouble-free action. This plate also features the all-new concept of one-piece hydraulics from the most respected name in hydraulic design, offering the best of all worlds: speed and self-lifting action. This all-new pump will lift the heaviest outboard motor from bottom to top in less than 8 seconds.

T-H Marine AHJ8VBDP Attributes T-H Marine AHJ8VBDP Features and Benefits

Self-contained hydraulic pump system (no tank or lines to install)
Made from self-lubricating material, no greasee required and the hydraulic actuator is made in the USA.
Rod and slotted lift design - Trouble-free lifting action
Hi-Engineering Polymer Rods - 6 times more abrasion resistant than steel rods
Easy removal of two-pin pump - Quick maintenance installation in half the time of comparable jack plates
Available in 4, 6, 8, 10, 12 and 14 inch setback models
Standard versions can be used for most outboards - 300 hp maximum
"HD" - HEAVY DUTY version is designed for engines up to 400 hp.
All ATLAS plates are pre-drilled for Power-Pole and Minn-shallow water anchors. Kota Talon
Stroke length - 5 inches, height adjustment up to 7 inches

8 recessed hydraulic jack plate " ATLAS™ - Glossy black anodized

The designAtlas' revolutionary engine meets the demands of today's high-performance outboards. The one-piece design, featuring the innovative Rod and Slot lifting system, will handle the stresses of the heaviest and most powerful outboards, up to 300 HP or 625 pounds, on the market today.

The entire hydraulic system is integrated. the jack eliminating the need to install pumps and tanks inside the transom. The all-new hydraulic unit is also fast. It lifts from bottom to top in 8 seconds!

Designed to meet the needs of today's high-performance outboard motors. This one-piece design featuring an innovative rod and groove lift system will be able to handle the pressure of the heaviest and most powerful outboard motors on the market today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and tanksfuel in the beam and hydraulic hoses which pass through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets. -atlas-8-set-back-hydraulic
MPN: AHJ-8V-B-DP
UPC: 733572096200
ASIN: B07BH544V1
WSKU: THMAHJ8VBDP
SSKU:
KSKU: T9TAHJ8VBDP
GSKU:
MSKU:
LSKU: 232-AHJ8VBDP
NAME: T-H Marine ATLAS™ 8" Recessed Hydraulic Jack Plate - Gloss Black Anodized
NAME_EX: T-H MARINE PLATE ATLAS 8" STD RETRACTED HYDRAULIC JACK
PTITLE: T-H Marine ATLAS™ 8" Recessed Hydraulic Jack Plate - Gloss Black Anodized
TYPE: Boat Equipment
SELLER: T-H Marine Supplies
Google Category : VEHICLES AND PARTS> VEHICLE PARTS AND ACCESSORIES> PARTS AND ACCESSORIES FORWATERCRAFT
Automotive Parts & Accessories

T-H Marine ATLAS 8" Recessed Hydraulic Jack Plate - Bright Black Anodized [AHJ-8V-B-DP]
Automotive Parts and Accessories
Gtags:

T-H Marine
Jack
Hydraulic

GSpecs:

T-H Marine ATLAS™ 8" Hydraulic Recessed Jack Plate - Gloss Black Anodized Product Description

TH Marine Atlas Hydraulic Jack Plate The T-H Marine ATLAS Hydraulic Jack Plate is truly the next generation of jack plate design jack, designed for the heaviest and most powerful outboard motor. engines on the market today, even the big four-strokes. Our innovative high-tech polymer rod and slotted lift design ensures trouble-free action. This plate also features the all-new concept of one-piece hydraulics from the most respected name in hydraulic design. offering the best of all worlds: speed and autonomous lifting action. This all-new pump will lift the heaviest outboard motor from bottom to top in less than 8 seconds.

T-H Marine AHJ8VBDP Attributes T-H Marine AHJ8VBDP Features and advantages

Pump systemself-contained hydraulic (no tank or lines to install)
Made from a self-lubricating material, no grease required and Hydraulic actuator is made in the USA.
Rod and slotted lifting design - Trouble-free lifting action
High-tech polymer rods - 6 times more abrasion resistant than steel rods
Easy removal 2-Prong Pump - Quick Service Installation in Half the Time of Comparable Jack Plates
Available in 4, 6, 8, 10, 12 and 14 inch setback models
Standard versions can be used for most outboards - 300 hp maximum
"HD" - HEAVY DUTY version is designed for engines up to 400 hp.
All ATLAS plates are pre-drilled for the Power-Pole and Minn-Kota Talon shallow water anchors
Stroke length - 5 inches, height adjustment up to 7 inches

ATLAS™ 8" Hydraulic Recessed Jack Plate - Gloss Black Anodized

Revolutionary Atlas design meets the demands of high outboards performance today The one-piece design, featuring the innovative rod and slot lift system, will handle the stresses of the heaviest and most powerful outboards, up to 300 HP or 625 pounds, on. market today.

The entire hydraulic system is integrated into the jack, eliminating the need to install pumps and tanks inside the transom. The all-new hydraulic unit is also fast. It lifts from bottom to top in 8 seconds!

Designed to meet the needs of today's high-performance outboard motors This one-piece design features an innovative system. rod and groove lifting will be able to cope with the pressure of the heaviest and most powerful outboard motors on the marketToday. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses running through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. From top to bottom in 8 seconds, installation time is only half that of similar sockets.

T-H Marine ATLAS™ 8" Recessed Hydraulic Jack Plate - Bright Black AnodizedroductsT-H Marine Replacement Relay Harness for Hydraulic Jack Plates 2014+

Frequently Asked Questions (FAQ) about T-H Marine ATLAS™ 8" Hydraulic Recessed Jack Plate - Gloss Black Anodized Who is T-H Marine Supplies?
How to Describe the ATLAS™ Hydraulic Recessed Jack Plate 8" T-H Marine - Gloss Black Anodized?
What is theweight of the product?
What is the finish of the product?
Who is T-H Marine Supplies? T-H Marine manufactures thousands of products in many categories, including outboard motor mounts, outboard tilt and trim, access hatches, deck plates, cover locks, l deck fittings, livewell aeration, plumbing fittings, battery trays, fishing rod holders, boat lights, rigging accessories. , trolling motor accessories, pontoon boat parts and general boat accessories. How to describe the T-H Marine ATLAS™ 8" Hydraulic Recessed Jack Plate - Gloss Black Anodized? Designed to meet the needs of today's high-performance outboard motors. This multi-piece design with an innovative system of lifting rods and grooves will be able to cope with the pressure of the heaviest and most powerful outboard motorsmarket leaders today. All hydraulic devices are integrated into the jack, eliminating the need to install pumps and fuel tanks in the beam and hydraulic hoses running through the beam. High-tech engineering polymer rods have 6 times the wear resistance of steel and are made from self-lubricating materials. Up and down in 8 seconds, installation time is only half that of similar jacks.

Atlas' revolutionary design meets the demands of today's high-performance outboard motors . The one-piece design, featuring the innovative rod and slot lift system, will provide years of trouble-free service.
One-piece design is easy to install and remove without tools.
Includes sturdy steel construction with a durable gloss black anodized finish.

Atlas™ is the latest and greatestinnovative hydraulic cylinder hyplate on the market.
The revolutionary design meets the demands of today's high-performance outboards.
The one-piece design, featuring the lifting system innovative slotted shank design, will make your life easier by saving you time and effort.

The ATLAS is the jack plate that will handle the stress of outboards high performance today. With a one-piece design and innovative rod and slot lifting system, this will be the jack plate you can rely on for years to come.

How heavy is the product? 68

The Atlas' revolutionary design meets the demands of today's high-performance outboards. The one-piece design, featuring the innovative Rod and Slot lifting system, will provide years of trouble-free service.
A one-piece design is easy to install and remove without tools.
Includes a steel constructionrugged with a durable gloss black anodized finish.
Atlas™ is the latest, most innovative hydraulic cylinder plate on the market.
Revolutionary design meets the demands of outboard motors high performance today.
The one-piece design, featuring the innovative rod and slot lifting system, makes your life easier by saving you time and effort.
Atlas is the world's first one-piece jack plate
Designed to handle the high stresses of today's high-performance outboards
The rod lift system and slot ensures a secure and easy fit on any boat
The revolutionary Atlas design meets the demands of today's high-performance outboards.
The One-piece design, including the innovative Rod and Slot lifting system, will withstand the stresses of the toughest applications.
Model: AHJ-8V-B-DP

What is the finish of the product? Black

Save $619 when you purchase the T-H Marine ATLAS™ 8" Recessed Hydraulic Jack Plate - Brilliant Black Anodized for only $1,519 from NVN Marine! Free Same Day Delivery Before 3pm T-H Marine ATLAS™ 8" Hydraulic Recessed Jack Plate - Gloss Black Anodized Technical Specifications.

Type:	Boat equipment \| Jack Plates
Seller:	T-H Marine Supplies
Weight:	67.35 lbs

T-H Marine ATLAS™ Hydraulic Recessed Jack Plate 8" - Gloss Black Anodized User ReviewsT-H Marine ATLAS™ 8" Hydraulic Recessed Jack Plate - Gloss Black Anodized Shipping & Returns

Shipping Weight:	67.35 lbs
Box sizes:	10.00 (h) x 18.00 (l) x21.00 (l)
Cubic feet:	3780.0
Returning:	Yes
P65:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here .