Trident Marine 6" ID Blue Silicone Molded 90 Degree Wet Exhaust Elbow with 4 T-Bolt Hose Clamps Boat Outfitting

6" ID Blue Silicone Molded 90 Degree Wet Exhaust Elbow with 4 T-Clamps

Mix Rubber Marine Wet Exhaust Fittings of Trident Silicone They are molded of very High Temperature Blue Silicone EPDM Blend Rubber with a smooth bore and cover, except 6" ID elbows; or larger have reinforcing ribs molded into the exterior.

Features:

Four stainless steel T-bolt hose clamps
EDPM silicone/rubber blend very high temperature - molded
This elbow has excellent resistance to ozone, salt water, diesel fumes, splashes, cold, heat and aging
Exceeds (SAE J2006-R1 and ABYC & NMMA P-1) exhaust standards
Ultra high temperature blue silicone blended with EDPM rubber at 350°F (177°C) max in continuous

Construction:

Color: Blue
Reinforcement: Reinforcement ribs over 6 inches inside diameter. and more
Temperature range: up to 350°F (177°C)

Specifications:

Inside diameter: (inches) 6" / 152.4 mm
A: (inches) 7" / (mm) 178
B: (inches) 7" / (mm) 178
C: (inches) 2.25" / (mm) 57.2
D: (inches) 2" / (mm) 57.2
R: (inch) 1.75" / (mm) 44.5
W: (inch) 0.25" / (mm) 6.4
Elbow degree: 90 degrees

PRODUCT ID: 99753
SKU: NVN-99753
CSKU: CWR-99753
REWRITE: 110864-trident-marine-6-id-90-degree-blue-silicone
MPN: 290V6000-S/S
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: BLUE SILICONE MOLDED WET EXHAUST 90 DEGREE TRIDENT 6" ID
NAME_EX:
PTITLE: Molded Wet Exhaust Elbow Trident Marine Blue Silicone 6" ID 90 Degree with 4 CollarT-Bolt Clamps
TYPE: Boat Equipment | Fuel Systems
SELLER: Trident Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT FUEL SYSTEMS> WATERCRAFT FUEL TANKS & PARTS
Amazon Category :

Gtags:

GSpecs:

Trident Marine 6" ID Blue Silicone Molded 90 Degree Wet Exhaust Elbow with 4 T-Bolt Clamps Product Description

6" ID Blue Silicone Molded 90 Degree Wet Exhaust Elbow " ID with 4 T-Bolt Hose Clamps Trident Rubber and Silicone Blend Marine Wet Exhaust Fittings. They are molded in a super high temperature blue silicone EPDM rubber blend with a smooth bore and cover; except that elbows 6" ID or larger have reinforcing ribs molded on the outside.

Features:

Four Stainless Steel T-Bolt Hose Clamps
Extra High Temperature EDPM Silicone/Rubber Blend - Molded
This elbow has excellent resistance to ozone, water salty, diesel fumes, splashes, cold, heat and aging
Exceeds standardsexhaust pipes (SAE J2006-R1 and ABYC & NMMA P-1)
Ultra high temperature blue silicone mixed with EDPM rubber at 350°F (177°C) maximum continuous

Construction:

Color: Blue
Reinforcement: Reinforcement ribs on 6" I.D. and above
Temperature Range: Up to 350°F (177°C)

Specifications:

Inner Diameter: (inch) 6" / 152.4 mm
A: (inch) 7" / (mm) 178
B: (inch) 7" / (mm) 178
C: (inches) 2.25" / (mm) 57.2
D: (inches) 2" / (mm) 57.2
R: (inches) 1.75" / (mm) 44.5
W: (inches) 0.25" / (mm) 6.4
Degree of elbow: 90 degree

Frequently Asked Questions (FAQ) about TRIDENT 6" ID 90 DEGREE WET EXHAUST MOLDED IN BLUE SILICONE Who is the Trident Marine?
Who is Trident Marine? Trident Marine brings you the best Trident Marine brings you on board.yaux, tubes, conduits, ducts and flexible wet exhaust connectors in the global marine market. Trident Marine also built. and supplies marine LP gas systems

Save $154 when you purchase the Trident Marine Blue Silicone Molded Wet Exhaust Elbow 6" ID at 90 degrees with 4 T-. Bolt Pliersfor only $210 from NVN Marine! Same day dispatch before 3 p.m. Trident Marine 6" ID Blue Silicone Molded 90 Degree Wet Exhaust Elbow with 4 T-Clamps Technical Specifications

Type:	Boat Equipment \| Fuel Systems
Seller:	Trident Marine
User's Guide:	Download PDF

Molded Wet Exhaust Trident Marine Blue Silicone 6" ID 90 Degree Elbow with 4 CollarsT-clamp Return and Refund Policy here.