Turning Point Express Mach3 - Right Hand - Stainless Steel Propeller - E1-1013 - 3 Blades - 10.5" x 13 Pitch Boat Outfitting

Express Mach3™ - Right hand - Stainless steel propeller - E1-1013 - 3 blades - 10.5" x 13 pitch

Turning Point a builds its reputation based on a consistent focus on engineering the world's highest performing stainless steel propellers. Super rigid metallurgy, unique blade geometry, aggressive pitch, rake and cup give you the best of what. They can deliver not only top speed, maneuverability and hole shooting, but also mid-range performance, which will save you a ton of gas mileage if you want to shoot. get the most out of what your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.

The Three Blade Express is ideal for boaters looking to get the most out of. their boat and offer excellent bow lifting capabilities. These accessories are perfectly suited to.ux medium power pontoons, fishing boats, semi-rigid boats and tiller boats. 75 hp outboard with 2.5", 3" and 3.5" gear housings from all engine manufacturers.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous demands of New Express Mach3 and Mach4 designs 20% higher chromium content than the competition – more shine, better corrosion resistance and 5. times more durable than regular stainless steel This new material gives Turning Point engineers and designers the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large Free Flow Exhaust Ports

Turning Point propeller housings have huge exhaust flow paths. Their propellers have 40% flow area. more exhaust compared to c productsoncurrents. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine , then choose the propeller that suits your navigation needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or PropWizard™ for hub kit selection.

WARNING:This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. go to P65Warnings.ca.gov.

The gearbox is a right-hand propeller with a diameter of 14 inches and a pitch of 13 inches. Make the 4 a prop. performance. Turning 4 Blade HuStler has revolutionized aluminum...
PRODUCT ID: 63332
SKU: NVN-63332
CSKU: CWR-63332
REWRITE: 74443-turning-point-express. -mach3-right-hand
MPN: 31301312
UPC: 652480200922
ASIN: B01CZ2YERA
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 31301312
LSKU:
NAME: Turning Point Express Mach3™ - Right Hand - Stainless Steel Propellere - E1-1013 - 3 blades - 10.5" x 13 pitch
NAME_EX: TURNING POINT EXPRESS SS RH PROPELLER 10.5" stainless steel - E1-1013 - 3 blades - 10.5" x 13 pitch
TYPE: Boat equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> PARTS AND ACCESSORIES VEHICLE> POWERWATER PARTS & ACCESSORIES> POWERWATER ENGINE PARTS> POWERWATER PROPELLERS
Auto Parts & Accessories

Turning Point Express Mach4 Right Hand Stainless Steel Propeller Ex by Hodges Marine
Automotive Parts and Accessories
Gtags:

GSpecs:

Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - E1-1013 - 3 Blades - 10.5" x 13 Pitch Product Description

Express Mach3™ - Right Hand - Stainless Steel Propeller - E1-1013 - 3 blades - 10.5" x 13 pitch

Turning Point has built its reputation on a consistent focus on engineering the finest stainless steel propellers efficient in the world. Ultra-rigid metallurgy, unique blade geometry, aggressive pitch, rake and cup all give you the best they can offer. Not only does top speed, handling, and holeshot improve, but so does mid-range performance, which will save you a ton in gas mileage. If you want to get the most out of what your boat and engine can offer, then the Express Mach3 3 Blade has you covered.

The Three Blade Express is ideal for boaters looking to get the most out of bestr part of their boat and offer excellent bow lifting capabilities. These accessories are ideally suited to medium power pontoons, fishing, inshore and lighter tide boats. It will fit all 6-75hp outboards with 2.5", 3" and 3.5" gear cases from all engine manufacturers.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous demands of the new Express Mach3 and Mach4 models 20% higher chromium content than the competition – more shine, better resistance to corrosion. corrosion and 5 times more durable than regular stainless steel This new material gives Turning Point engineers and designers the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large free-flowing exhaust ports

Turning Point propeller housings have airways.massive exhaust flow. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power like manifolds for your boat.

Turning Point manufactures Express Propellers to fit Evinrud 9.9 (bigfoot) - 300 hp and moree, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and transmissions Z. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point accessories run faster, pull harder and handle better.

Note : A hub kit is required for the installation of this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

The gearbox is a right-hand propeller with a diameter of 14 inches and a pitch of 13 inches. Make the 4 a performance accessory. Turning point 4 Blade Hustler revolutionized aluminum...

Turning Point Express Mach3™ - Right hand - Stainless steel propeller - E1-1013 - 3 blades - 10.5" x 13 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts
Anti-Corrosion Block High Performance Waterproof Grease - Tube of 2oz - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Corrosion Block Grease - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Corrosion Block Grease - 14 oz cartridge - non-hazardous, non-flammable and non-toxic
Corrosion Block High performance waterproof grease - 16 oz can - Non-hazardous, non-flammable and non-toxic
Forespar Lanocote Solution against rust and corrosion corrosion, prop and bottom - 16 oz.
Sea-Dog Galvanized Propeller Wrench for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stopper

Frequently Asked Questions (FAQ) about Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - E1-1013 - 3 Blades - 10.5 " x 13 Pitch Who are Turning Point propellers?
How to describe Turning Point Express Mach3™ - Right hand - Stainless steel propeller - E1-1013 - 3 blades -10.5" x 13 Pitch?
Turning side of the product?
What is the material of the Turning Point Express Mach3™ - Right hand - Stainless steel propeller - E1-1013 - 3 blades - 10, 5" x 13 pitch?
What is the diameter (inches) of the product?
What is the pitch of the product?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect motors and drives from shifting shock and harsh vibration. It is also the most durable hub system available. How to Describe Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - E1-1013 - 3 Blades - 10.5" x 13 Pitch? The gearbox is a right hand propeller with a diameter of 14 inches and a pitch of 13 inches. Make 4 an access.performance ssory Turning point 4 Blade Hustler revolutionized aluminum... Product rotation side Right What is the material of the Turning Point Express? Mach3™ - Right hand - Stainless steel propeller - E1-1013 - 3 blades - 10.5" x 13 pitch? Stainless steelWhat is the diameter (inches) of the product? 10-1/2"What is the pitch of the product ? 13

Save $183 on the purchase of the Turning Point Express Mach3™ - Right hand - Stainless steel Steel propeller - E1-1013 - 3 blades - 10.5" x 13 pitchfor only $293 from NVN Marine! Same day shipping before 3pm. Turning Point Express Mach3&commerce; - Right Hand - Stainless Steel Propeller - E1- 1013 - 3 blades - 10.5" x 13 Pitch Technical specifications

Type:	Boat layout \| Propeller
Supplier:	Turning Point Propellers
Weight:	7.7 lbs
Rotation:	Right
Diameter (inches):	10-1/2"
Material:	Stainless steel
No :	13"
User Guide:	Download PDF
Product brochure:	Download PDF

Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - E1-1013 - 3 Blades - 10.5"x 13 Pitch User ReviewsTurning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - E1-1013 - 3 blades - 10.5" x 13 Pitch Shipping & Returns

Shipping Weight:	7.7 lbs
Box sizes:	6.00 (h) x 13.00 (w) x 14.00 (w)
Cubic feet:	1092.0
Returnable:	Yes

For detailed shipping terms, please review our Shipping Policy and you can find our Return and Refund Policy here.