Turning Point Express Mach3 - Right Hand - Stainless Steel Propeller - EX3-1011 - 3 Blades - 10.5" x 11 Pitch Boat Outfitting

Express Mach3™ - Right hand - Stainless steel propeller - EX3-1011 - 3 blades - 10.5" x 11 pitch

Turning Point a builds its reputation based on a consistent focus on engineering the world's highest performing stainless steel propellers. Super rigid metallurgy, unique blade geometry, aggressive pitch, rake and cup give you the best of what. They can deliver not only top speed, maneuverability and hole shooting, but also mid-range performance, which will save you a ton of gas mileage if you want to shoot. get the most out of what your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.

The Three Blade Express is ideal for boaters looking to get the most out of. their boat and provide excellent bow lifting capabilities. These accessories are a perfect fit.medium power pontoons, fishing boats, RIBs and tiller boats. 75 hp outboards with 2.5", 3" and 3.5" gear housings from all engine manufacturers.

Note: A hub kit is required for installation of this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive problems. For more information, go to P65Warnings.ca.gov.

The gearbox is a right-hand propeller with a diameter of 10.5 inches and a pitch of 11 inches. Turning Point's persistent commitment to designing the best performing parts has established its reputationputation.
PRODUCT ID: 64481
SKU: NVN-64481
CSKU: CWR-64481
REWRITE: 75592-turning-point-express-mach3-right-hand
MPN: 31221111
UPC: 652480206610
ASIN: B01N6X67OM
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 31221111
LSKU:
NAME: Turning Point Express Mach3 ™ - Right hand - Stainless steel propeller - EX3-1011 - 3 blades - 10.5" x 11 pitch
NAME_EX: TURNING POINT EXPRESS SS RH Propeller 10.5" Mach3™ - Right Hand - Stainless Steel Propeller - EX3-1011 - 3 Blades - 10.5" x 11 Pitch
TYPE: Boat Equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS> WATERCRAFT PROPELLERS
Automotive Parts & Accessories
Turning Point Propellers Inc 31221111 Props Express 10, 5X11 3Bl Rh
TitleGoogle: Turning Point Express Mach3 Right Hand Stainless Steel Propeller Ex by Hodges Marine
Automotive Parts & Accessories
Gtags:

GSpecs:

Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX3-1011 - 3 Blades - 10.5" x 11 Pitch Product Description

Express Mach3™ - Right Hand - Stainless Steel Propeller - EX3-1011 - 3 blades - 10.5" x 11 pitch

Turning Point has built its reputation on a consistent focus on engineering the finest stainless steel propellers efficient in the world. Ultra-rigid metallurgy, unique blade geometry, aggressive pitch, rake and cup all give you the best they can offer. Not only does top speed, handling, and holeshot improve, but so does mid-range performance, which will save you a ton in gas mileage. If you want to get the most out of what your boat and engine can offer, then the Express Mach3 3 Blade has you covered.

The Three Blade Express is ideal for boaters looking to get the most out of besteur part of their boat and offer excellent bow lifting capabilities. These accessories are ideally suited to medium power pontoons, fishing, rib and tiller boats. It will fit all 6-75hp outboards with 2.5", 3" and 3.5" bases from all engine manufacturers.

Note: One kit hub assembly is required for installation of this propeller See the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product. can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, see P65Warnings.ca.gov.

The gearbox is a right-hand propeller with a diameter of 10.5 inches and a pitch of 11 inches to the design of the highest performance parts has established its reputation

Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX3-1011 - 3 Blades - 10.5" x 11 Pitch Related ProductsDavis Prop Sox.
Attwood Propeller Wrench Set - Fits Propeller Nuts from 17/32" to 1-1/4"
High performance anti-corrosion water blockAnti-corrosion grease - 2 oz tube - Non-hazardous, non-flammable and non-toxic
Corrosion Block High performance waterproof grease - ( 2) 3 oz cartridges - Non-hazardous, non-flammable and non-toxic
Corrosion Block High Performance Waterproof Grease - 14 oz Cartridge - Non-hazardous, non-flammable and non-toxic
Corrosion Block High Performance Waterproof Grease - Jar 16 oz - Non-hazardous, non-flammable and non-toxic
Forespar Lanocote Rust and Corrosion Solution, Accessory and Bottom - 16 oz
Sea-Dog Galvanized Propeller Wrench for Propeller Nut 1- 1/16"
T-H Marine Prop Master Prop Stop Propeller Stop

QuestionsFrequently Asked Questions (FAQ) about Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX3-1011 - 3 blades - 10.5" x 11 pitch are Turning Point propellers?
How to describe Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX3-1011 - 3 blades - 10.5" x 11 Pitch?
What is the type of product?
Rotation side of the product?
What is the material of the Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX3- 1011 - 3 blades - 10.5" x 11 pitch?
What is the best use of the product?
What are the dimensions of the product?
What is the diameter (inches) of the product?
What is the compatibility of this product?
What is the pitch of the product?
How many blades does this product have?
Who is Turning Point Propellers?>Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the hub system.interchangeable on the market. This MasterGuard hub system helps protect motors and drives from shifting shocks, bumps and impacts. vibes. It is also the most durable hub system available. How to describe Turning Point Express Mach3™ - Right hand - Stainless steel.Stainless steel propeller - EX3-1011 - 3 blades - 10.5" x 11 pitch? The gearbox is a right-handed propeller with a diameter of 10 .5 inch and 11 inch pitch Turning Point's persistent commitment to designing the highest performance parts has established its reputation. What is the product type Rotation side of the. product RightWhat is the material of the Turning Point Express Mach3™ - Right Hand - Stainless Steel Propeller - EX3-1011 - 3 Blades - 10.5" x 11 Pitch? Stainless steelWhat is the best use of the product? Fast Hole ShotWhat are the dimensions of the product? 10 1/2" diameterWhat is the diameter (inches) of the product? 10-1/2"What is the compatibility of this product? 9.9 (Bigfoot) at 300+HP Outboard
SterndrivesWhat is the pitch of the product? 11How many blades does this product have? 3 blades

Save $240 on the purchase of the Turning Point Express Mach3™ - Right hand - Stainless steelPropeller - EX3-1011 - 3 blades - 10.5" x 11 pitch b> for only $202 from NVN Marine! Same day dispatch before 3 p.m. Turning Point Express Mach3™ - Right Hand - Stainless Steel Steel Propeller - EX3-1011 - 3 Blades - 10.5" x 11 Pitch Technical Specifications

Type:	Boat Equipment \| Propeller
Supplier:	Turning Point Propellers
Weight:	7.3 lbs
Diameter (inches) :	10 -1/2"
Material:	Stainless steel
Pitch:	11"
Rotation :	Right
User Guide:	Download PDF
Product brochure:	Download PDF

Turning Point Express Mach3™ - Right hand - Stainless steel propeller - EX3-1011 - 3 blades - 10.5" x 11 pitch Express Mach3™ - Right hand - Stainless steel propeller - EX3-1011 - 3 blades - 10.5" x 11 pitch Shipping & Returns

Shipping Weight:	7.3 lbs
Box sizes:	6.00 (h) x 11.00 (w) x 12.00 (w)
Cubic feet:	792.0
Returnable:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our return policy. and refund policy here.