Turning Point Express Mach4 - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4 Blades - 14" x 21 Pitch Boat Outfitting

Express Mach4™ - Left - Stainless steel propeller - EX-1421-4L - 4 blades - 14" x 21 pitch

The propeller that put the "four" in Perfourmance! Turning Point's four blades revolutionized the propeller market when they were introduced No one had ever produced a propeller with two different blade shapes (they call it dual geometry) for applications. from 90 to 300+ hp is specially designed with two blade geometries: (diagram label 2) two blades utilize Hustler's high-performance variable rake and aggressive pitch design for incredible holeshots and turns, and ( diagram label 1) Two blades use an offshore style design for high speed and maximum rear lift.

These props have rewritten the rules, proving that you can use a four blade offering a powerful shot. unprecedented hole, maneuverability and stability in rough waternt without the loss of high-end speed you experience with other manufacturers. propellers.

Now manufactured in our industry-leading TP17 stainless steel, the ExprESS Mach4 series is perfect for any application that demands enhanced acceleration, turning and loading capabilities. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% plus tough and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large flow-through exhaust ports free

Turning Point Hou Propeller chants have massive exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard installation kits garantis for life to adapt it to your engine, then choose the propeller that matches your navigation needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm For more information,

The Express Series is now manufactured.Made from state-of-the-art TP17 stainless steel, ideal for any application. which requires enhanced acceleration, cornering and charging capabilities... mach4-left
MPN: 31502141
UPC: 652480200908
ASIN: B00TUNZ8T6
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 31502141
br> LSKU:
NAME: Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4 Blades - 14" x 21 Pitch
NAME_EX: TURNING POINT EXPRESS PROPELLER S SS LH 14" " x 21 Pitch
TYPE: Boat Equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER ENGINE PARTS> POWERWATER PROPELLERS

Turning Point Propeller 3004.9359 31502141 Steel 4-Blade Express Left Propeller istainless steel (14 x 21)
Turning Point Express EX-1421-4L Stainless steel left propeller - 14 x 21 - 4 blades - 31502141

Gtags:

GSpecs:

Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4 Blades - 14" x 21 Pitch Product Description

Express Mach4™ - Left Hand - Stainless Steel Propeller - EX -1421-4L - 4 blades - 14" x 21 pitch

The propeller that put the "four" into performance! Turning Point's four blades revolutionized the propeller market when they were introduced. No one had ever produced a propeller with two different blade shapes (it's called Dual Geometry) for applications from 90 to 300+hp. This propeller is uniquely designed with two blade geometries: (diagram label 2) two blades utilize Hustler's high-performance variable rake and aggressive pitch design for incredible holeshots and turns, and (diagram label 1 ) two blades use an offshore style design for high height. speed and maximum rear lift.

These accessories have rewritten the rules,proving you can use a four blade offering unprecedented holeshot, maneuverability and rough water stability without the high-end speed loss you experience with other manufacturers' propellers.

Now manufactured in our industry-leading TP17 stainless steel, the Express Mach4 Series is perfect for any application that demands enhanced acceleration, cornering and loading capabilities. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 andMach4. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designs that help you get the most out of your boat's performance.

Large, free-flowing exhaust ports

Turning Point propeller cases have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches to your navigation needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

The Express Series is now manufactured from industry-leading TP17 stainless steel, ideal for any application requiring improved acceleration, turning and loading. carrying capacities...

Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4 Blades - 14" x 21 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set - Fits 17/32" to 1-1/4" Propeller Nuts
Corrosion Block High Performance Waterproof Grease - 2 oz Tube - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High Performance Waterproof Grease - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Corrosion Block Grease - 14 oz Cartridge - Non-Hazardous, Non-Flammable and non-toxic
High performance waterproof grease for corrosion block - 16 oz jar - Non-hazardous, non-flammable and non-toxic
Forespar Lanocote Rust and Corrosion Solution, Prop and Bottom - 16 oz.
Sea-Dog Galvanized Propeller Wrench for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stop

Frequently Asked Questions (FAQ) about Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4 Blades - 14 " x 21 Pitch Who are Turning Point propellers?
How to describe Turning Point Express Mach4™ - Left - Stainless Steel Propeller - EX-1421-4L - 4 blades - 14" x 21 Pitch?
What is the type of the product?
Turning side of the product?
What is the material of the Turning Point Express Mach4™ - Left hand - Stainless steelSteel propeller - EX-1421-4L - 4 blades - 14 " x 21 pitch?
What is the style of the product?
What is the best use of the product?
What are the dimensions of the product?
What is the diameter (inches) of the product?
How compatible is this product?
What is the pitch of the product?
How many blades have this product?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect motors, drives from harsh shifting shock, shock and severe vibration. How to Describe Turning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX-. 1421-4L - 4 blades - 14" x 21 pitch? The Express Series is now manufactured from industry-leading TP17 stainless steel, which is ideal for any application requiring enhanced acceleration, turning and loading capabilities. .. What is the product type? Modular Propeller Product Rotation SideWhat is the material of the Turning Point Express Mach4™ - Left Hand - Steel Propeller i?stainless - EX-1421-4L - 4 blades - 14" x 21 pitch? Stainless steelWhat is the style of the product? Express Mach4What is the best use of the product? Fast Hole ShotWhat are the dimensions of the product? 14" in diameterWhat is the diameter (in inches) of the product? 14"What is the compatibility of this product? For 135 to 300 HP with 4 3/4 inch crankcase hubWhat is the pitch of the product? 21How many blades does this product have? 4 blades

Save $328 with the purchase of the Turning Point Express Mach4™ - Left hand - Stainless steel propeller - EX-1421-4L - 4 blades - 14" x 21 pitch for only $304 from NVN Marine! Same day shipping before 3 p.m. Turning Point Express Mach4™ - Left - Stainless Steel Propeller - EX-1421-4L - 4 Blades - 14" x 21 Pitch Technical Specifications

Type:	Boat Equipment \| Propellers
Seller:	Turning Point Propellers
Weight:	16.6 lbs
Pitch:	21"
Material:	Stainless steel
Diameter (inches):	14"
Rotation:	Left
User Guide:	Download PDF
Product Brochure:	Download PDF

Turning Point Express Mach4™ - Left Hand - Professional Stainless Steel Peller - EX-1421-4L - 4 Blades - 14" x 21 Pitch User ReviewsTurning Point Express Mach4™ - Left Hand - Stainless Steel Propeller - EX-1421-4L - 4 Blades - 14 " x 21 steps Shipping & Returns

Shipping Weight:	16.6 lbs
Box sizes:	8.00 (h) x 16.00 (w) x 16.00 (w)
Cubic feet:	2048.0
Returnable:	Yes