Turning Point Express Mach4 - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Pitch Boat Outfitting

Express Mach4™ - Right hand - Stainless steel propeller - EX1/EX2-1317-4 - 4 blades - 13.25" x 17 pitch

The propeller that put the "four" in Perfourmance! Turning Point's four blades revolutionized the propeller market when they were introduced. No one had ever produced a cutting edge swept cleaver design for 40 applications. at 150 hp rules, proving you can use a four-blade that delivers unprecedented holeshot, maneuverability and rough-water stability without the loss of high-end speed you experience with other manufacturers' propellers. These Turning Point propellers also produced up to 46% more reverse thrust than other comparable designs in recent tests.

Now made in our industry leading TP17 stainless steel. The Express Mach4 series is perfect for any application that requires enhanced acceleration capabilities, turn and load. This series of propellers is ideal. suitable for water sports, stern drive boats, tri-toons, bay boats and any vessel that can use the stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Turning Point engineers and designers the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large Free Flow Exhaust Ports

Turning Point propeller housings have huge exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like the manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun , Suzuki, Tohatsu 9.9 (bigfoot) -300+hp, Volvo Penta and Yamaha outboards and Sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. T's accessoriesurning Point run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other harm. .productive harm For more information,

The Express Series is now made from industry-leading TP17 stainless steel, ideal for any application requiring improved acceleration, turning and load carrying capabilities...
PRODUCT ID: 55814
SKU: NVN-55814
CSKU: CWR-55814
REWRITE: 66925-turning- point-express-mach4-right-hand
MPN: 31431730
UPC: 652480200731
ASIN: B00TUNZY5E
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 31431730
LSKU:
NAME : Turning Point Express Mach4™ - Right hand - Stainless steel propeller - EX1/EX2-1317-4 - 4 blades - 13.25" x 17 pitch
NOM_EX: TURNING POINT EXPRESS SS RH PROPELLER 13.25" 17 PITCH
PTITLE: Turning Point Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blade - 13.25" x 17 Pitch
TYPE: Boat Equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS> WATERCRAFT PROPELLERS
Automotive Parts & Accessories
br> Turning Point Propeller 31431730 Express 4-Blade Stainless Steel Right Hand Propeller with 4-1/4" (13.25 x 17) Gear Housing
Turning Point Express EX1- 1317-4/EX2-1317-4 Stainless Steel Right Hand Propeller - 13.5 x 17 - 4 Blades - 31431730
Automotive Parts & Accessories
Gtags:

GSpecs:

Turning Point Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Pitch Product Description

Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Pitch

The propeller that put the "four" into performance! Turning Point's four blades revolutionized the propeller market when they were introduced. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 hp applications. These propellers have rewritten the rules, proving that you can use a four blade offering unprecedented holeshot, maneuverability and rough water stability without the loss of top speed you experience with propellers from other manufacturers. These Turning Point propellers also produced up to 46% more reverse thrust than other comparable designs in recent tests.

Now made in our premium stainless steelThe industry-leading TP17, the Express Mach4 series is perfect for any application that demands enhanced acceleration, handling, turning and load-carrying capabilities. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older stainless steel models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five blade ski accessories.

Exclusive stainless steel, TP17™

Formulated to meet the rigorous requirements of New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition – more shine, better corrosion resistance. Nearly 250% stronger and 5 times more durable than regular stainless steel. This new material gives Tu engineers and designersrning Point the freedom to produce radical new designs that will help you get the most out of your boat's performance.

Large, free-flowing exhaust ports

Turning Point propeller housings have huge exhaust flow paths. Their propellers have 40% more gas flow area than the competing product. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Express propellers suitable for Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan 9.9 (bigfoot ) at over 300 hp. , OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine , then choose the propeller that suits your navigation needs. There are propeller models with 3 and4 blades, left and right rotating, with a variety of diameter and pitch options, available for almost all types of boats. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals, including LEAD which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

The Express Series is now manufactured from industry-leading TP17 stainless steel, ideal for any application requiring acceleration , improved shooting and charging. transport capacities...

Turning Point Express Mach4™- Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set – Fits 17/17 Propeller Nuts 32" to 1-1/4"
Anti-Corrosion Block High Performance Waterproof Grease – 2 oz Tube – Non-hazardous, non-flammable and non-toxic
Corrosion Block High Performance Waterproof Grease - (2) cartridges 3 oz - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High Performance Waterproof Grease - 14 oz Cartridge - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High Performance Waterproof Grease - 16oz Tub - No hazardous, non-flammable and non-toxic
Forespar Lanocote Rust and Corrosion Solution, Accessory and Bottom - 16 oz.
Sea-Dog Galvanized Propeller Wrench for 1-1/16 Propeller Nut "
T-H Marine Prop Master Prop Stop Propeller Stop

Frequently Asked Questions (FAQ) about Turning Point Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317- 4 - 4 blades - 13.25" x 17 pitch Who are Turning Point Propellers?
How to Describe Turning Point Express Mach4™ - Main right - Stainless steel propeller - EX1/EX2-1317-4 - 4 blades - 13.25" x 17 pitch?
What is the type of product?
Rotation side of the product?
What is the material of the Turning Point Express Mach4™ - Right hand - Stainless steel Propeller - EX1/EX2-1317-4 - 4 blades - 13.25" x 17 pitch?
What is the style of the product?
What is the best use of the product?
What are the dimensions of the product?
What is the diameter (inches) of the product?
What is the compatibility of this product?
What is the pitch of the product?
How many blades does this product have?
Who is Turning Point Propellers Turning Point Propellers manufactures aluminum and steel propellers? high performance stainless steel Turning Point was the first to introduce soy.interchangeable hub system on the market. This MasterGuard hub system helps protect motors and drives from shifting shocks, shocks and harsh vibrations. It is also the most durable hub system available. How to Describe Turning Point Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Pitch? The Express Series is now made of state-of-the-art TP17 stainless steel, ideal for any application requiring enhanced acceleration, rotation and load capabilities... What is the product type Modular Propeller Rotat?ion side of the product RightWhat is the material of Turning Point Express? Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Pitch? Stainless steelWhat is the style of the product? Express Mach4What is the best use of the product? Fast Hole ShotWhat are the dimensions of the product? 13-1/4"What is the compatibility of this product? For 40 to 150 HP with 4 1/4 inch housing hubWhat is the pitch of the product? 17How many blades does this product have? 4 Blades

Save $308 when you purchase the Turning Point Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 stepsfor only $286 from NVN Marine! Same day dispatch before 3 p.m. Turning Point Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Technical Pitch SSpecifications

Type:	Boat Equipment \| Propeller
Supplier:	Turning Point Propellers
Weight:	13.05 lbs
No :	17"
Material:	Stainless steel
Diameter (Inches):	13-1/4"
Rotate:	Right
User Guide:	Download PDF
Product brochure:	Download PDF

Turning Point Express Mach4™ - Right Hand - Stainless Steel Propeller - EX1/EX2-1317-4 - 4 Blades - 13.25" x 17 Pitch User ReviewsTurning Point Express Mach4™ - Right Hand - Stainless SteelPropeller - EX1/ EX2-1317-4 - 4 blades - 13.25" x 17 pitch Shipping & Returns

Shipping Weight:	13.05 lbs
Box sizes:	8.00 (h) x 15.00 (w) x 15.00 ( l)
Cubic feet:	1,800.0
Returnable:	Yes

For detailed shipping terms, please view our shipping policy and you can find our return and refund policy here.