Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1417-4L - 4 Blades - 14.5" x 17 Pitch Boat Outfitting
Hustler - Left - Aluminum propeller - LE-1417-4L - 4 blades - 14.5" x 17 pitch
The propeller that has put the "four" in performance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when it was introduced over 6 years ago No one had ever produced an aluminum propeller with two shapes of. different blades (they call it Dual Geometry) for applications from 90 to 300 hp and above This propeller is uniquely designed with two blade geometries: (diagram 2 label) two blades use the Hustler high performance variable rake and. Aggressive pitch design for incredible hole shots and turns, and (diagram label 1) two blades use an offshore style design for high speed and maximum rear lift.
These props have. rewrites the rules, proving you can use a four blade offering hole shot, maneuverabilityand unprecedented rough water stability without the loss of high-end speed you experience with propellers from other manufacturers.
The 4-blade Hustler series is perfect for any application that requires enhanced propeller capabilities. acceleration, cornering and load. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older aluminum models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five-blade ski accessories.
Press casting for added strength
The performance of stainless steel is built into the Hustler Aluminum propeller line. This is achieved through a unique blade geometry and an exclusive Turning Point, Squeeze Casting manufacturing process. This process generates the prohighest possible mechanical properties in a cast aluminum propeller, resulting from a tighter grain structure at high density. Stiffer blades mean less flex and a faster propeller. Competitors' aluminum propellers are made using an old die-casting process that produces propellers with air bubbles, voids and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades flex under load, ineffective, loss of propulsive efficiency.
Long-lasting Ultracoat™ powder coat finish
Exclusive to Turning Point, Ultracoat powder coating rivals a beautiful automotive finish and is more durable than paint. Using a state-of-the-art five-step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances the appearance of any boat. It is the benchmark in protection against corncorrosion of aluminum. The accessory looks newer for longer! Compared to competitors' 4-step painting and coating processes which result in significantly less abrasion and corrosion resistance.
Large, free-flowing exhaust ports
Turning Point propeller housings have massive exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like the manifolds for your boat.
Turning Point manufactures Hustler propellers to fit Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun , Suzuki, Tohatsu, Volvo Penta and Yamaha from 6 to 300 hp and more Outboards and Sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose thepropeller that fits your navigation needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.
Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.
This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive problems, and CARBON BLACK, recognized by the State of California.The State of California is the cause of cancer For more information, go to P65Wa.rnings.ca.gov.
Liar Left Aluminum Propeller Size: 14.5 x 17 4 Blades Note: A hub kit is required to install this propeller. See turning point selection chart or pillar...
PRODUCT ID: 48466
SKU: NVN-48466
CSKU: CWR-48466
REWRITE: 59577-turning-point-hustler-left- hand
br> MPN: 21501740
UPC: 652480102486
ASIN: B007D2KBM0
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 21501740
LSKU:
NAME: Turning Point Hustler - Left hand - Aluminum propeller - LE-1417-4L - 4 blades - 14.5" x 17 pitch
NOM_EX: TURNING POINT HUSTLER AL LH Propeller 14.5" X 17 Pas
Ptitle: Turnout Point Hustler - Main left - Aluminum propeller - Le -1417-4L - 4 blades - 14.5 "x 17 Pas
Type: Boat equipment | Helic
Seller : Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS> HEYPOWERWATER LICES
Automotive Parts and Accessories
Turning Point Propellers 21501740 PROP HUSTLER 4BL AL 14.5X17 LH
Turning Point Hustler Aluminum Left Propeller 14.5 x 17 to 4 blades
Automotive Parts & Accessories
Gtags:
GSpecs:
Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1417-4L - 4 Blades - 14.5" x 17 Pitch Product Description
Hustler - Left Hand - Aluminum Propeller - LE-1417 -4L - 4 -Blade - 14.5" x 17 Pitch
The accessory that put the "four" in performance! The Turning Point Four Blade Hustler revolutionized the aluminum propeller market when it was introduced over 6 years ago. No one had ever produced an aluminum propeller with two different blade shapes (it's called Dual Geometry) for applications from 90 to 300+ hp. This propeller is uniquely designed with two blade geometries: (diagram label 2) two blades utilize Hustler's high-performance variable rake and aggressive pitch design for incredible holeshots and turns, and (diagram label 1 ) two blades use an offshore style design for high height. speed and maximum rear lift.
These accessesEvenings have rewritten the rules, proving that you can use a four-blade offering unprecedented holeshot, maneuverability and rough-water stability without eliminating the loss of high-end speed you experience with other manufacturers' propellers. br>
The 4-blade Hustler series is perfect for any application that requires enhanced acceleration, turning and loading capabilities. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older aluminum models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five-blade ski accessories.
Press casting for added strength
The performance of stainless steel is built into the Hustler Aluminum propeller line. This is achieved thanks towith a unique blade geometry and an exclusive Turning Point, Squeeze Casting manufacturing process. This process generates the highest mechanical properties possible in a cast aluminum propeller, resulting in a tighter, high-density grain structure. Stiffer blades mean less flex and a faster propeller. Competitors' aluminum propellers are manufactured using the old die-casting process that produces props with air bubbles, voids and granularity. Weak, lack of strength and rigidity. Difficult to repair. Blades flex under load, ineffective, loss of propulsive efficiency.
Long-lasting Ultracoat™ powder coat finish
Exclusive to Turning Point, Ultracoat powder coating rivals a beautiful automotive finish and is more durable than paint. Using a state-of-the-art five-step process, Ultracoat gives the helice a bright, uniform appearance that enhances the appearance of any boat. It is the benchmark for aluminum corrosion protection. The accessory looks newer for longer! Compared to competitors' 4-step painting and coating processes which result in significantly less abrasion and corrosion resistance.
Large, free-flowing exhaust ports
Turning Point propeller housings have massive exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.
Turning Point manufactures Hustler propellers to fit Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC from 6 to 300hp and up. , Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha hors-board and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches your boating needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.
Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.
This product can expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harmWe have damage, and CARBON BLACK which is known to the State of California to causecancer. For more information, go to P65Warnings.ca.gov.
Liar Left Aluminum Propeller Size: 14.5 x 17 4 Blades Note: A hub kit is required to install this propeller. See turning point selection chart or pillar...
Turning Point Hustler - Left hand - Aluminum propeller - LE-1417-4L - 4 blades - 14.5" x 17 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set – Fits 17/32" to 1-1/4" Prop Nuts
Anti-Corrosion Block High Performance Waterproof Grease – 2 oz Tube – Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High Performance Waterproof Grease - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
Corrosion Block High Performance Waterproof Grease - 14 oz Cartridge - Non-hazardous, non-flammable and non-toxic
High performance anti-corrosion waterproof grease - 16 oz jar - Non-hazardous, non-flammable et non-toxic
Forespar Lanocote Rust and Corrosion Solution, Prop and Bottom - 16 oz.
Sea-Dog Galvanized Propeller Wrench for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stop
Frequently asked questions (FAQ) about Turning Point Hustler - Left - Aluminum propeller - LE-1417-4L - 4 blades - 14.5" x 17 Pitch Who are Turning Point Propellers?
How to Describe Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1417-4L - 4 Blades - 14.5" x 17 Pitch?
Turning side of the product?
What is the material of Point Hustler turning - Left hand - Aluminum propeller - LE-1417-4L - 4 blades - 14.5" x 17 pitch?
What is the diameter (inches) of the product?
What is the pitch of the product?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeab modelthe hub system on the market. This MasterGuard hub system helps protect motors and drives from shifting shocks, shocks and harsh vibrations. It is also the most durable hub system available. How to Describe Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1417-4L - 4 Blades - 14.5" x 17 Pitch? Liar's Left Hand Aluminum Propeller Size: 14.5 x 17 4 Blades Note : A hub kit is required to install this propeller See the Turning Point Selection Chart or Pillar... Product Rotation Side What is the material of the Turning Point Hustler - Left Hand. ? - Aluminum propeller – LE-1417-4L – 4 blades – 14.5" x 17 pitch? AluminumWhat is the diameter (inches) of the product? 14-1/2"What is the pitch of the product? 17
Save $82 when you purchase the Turning Point Hustler - Left Hand - Aluminum Propeller - LE-1417-4L - 4 blades - 14.5" x 17 pitchesr only $99 from NVN Marine! Same day dispatch before 3 p.m. Turning Point Hustler - Left - Aluminum Propeller - LE-1417-4L - 4 Blades - 14.5" x 17 Pitch Technical Specifications
| Type: | Boat Equipment | Propeller |
|---|---|
| Seller: | Turning Point Propellers |
| Weight: | 6.9 lbs |
| Diameter (inches): | 14-1/2" |
| Material: | Aluminium |
| Pitch: | 17 |
| Rotation: | Left |
| User Guide: | Download PDF |
| Product brochure: | Download PDF |
| Shipping Weight: | 6.9 lbs |
|---|---|
| Box sizes: | 7.00 (h) x 14.00 (w) x 15.00 (w) |
| Cubic feet: | 1470.0 |
| Recordable: | Yes |
| P65: | Yes |
