Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1317 - 3 Blades - 13.25" x 17 Pitch Boat Outfitting

Hustler - Right-handed - Aluminum propeller - LE1/LE2-1317 - 3 blades - 13.25" x 17 pitch

Turning Point has built its reputation by relentlessly focusing on engineering the world's highest performing aluminum propellers, using state-of-the-art compression casting technology, they produce 3-blade Hustler propellers that perform as fast as stainless steel propellers from their competitors, and sometimes even faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake and cup all give you the best they can offer: stainless performance at aluminum prices. Not only does top speed, handling, and holeshot improve, but so does midrange performance, which will save you a ton of gas mileage if you want to get the most out of it. based on what your boat and engine can dont offer, then the Hustler 3 Blade delivers.

The Three Blade Hustler is ideal for boaters looking to get the most out of the high end. out of their boat and provide excellent bow lifting capabilities. Four-blade propellers accelerate faster, present rear lift, handle rough or following seas better, and maintain speed better when loading the boat with gear or people. Three-blade propellers work best on pontoons, while four- and three-blade propellers work well on tri-toons (recent tests have shown that pontoons and tri-toons work better with larger blade diameters than runabout or bass boat hulls).

Squeeze Cast for added strength

The performance of stainless steel is integrated into the range of Hustler Aluminum propellers. This is achieved thanks to a unique blade geometry and a processUs exclusive manufacturing Turning Point, Squeeze Casting. This process generates the highest mechanical properties possible in a cast aluminum propeller, resulting in a tighter, high-density grain structure. Stiffer blades mean less flex and a faster propeller. Competitors' aluminum propellers are made using an old die-casting process that produces propellers with air bubbles, voids and granularity. Weak, lack of strength and rigidity. Difficult to repair. Blades flex under load, ineffective, loss of propulsive efficiency.

Long-lasting Ultracoat™ powder coat finish

Exclusive to Turning Point, Ultracoat powder coating rivals a beautiful automotive finish and is more durable than paint. Using a state-of-the-art five-step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances the appearanceof any boat. It is the benchmark for aluminum corrosion protection. The accessory looks newer for longer! Compared to competitors' 4-step painting and coating processes which result in significantly less abrasion and corrosion resistance.

Large, free-flowing exhaust ports

Turning Point propeller housings have massive exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like the heads for your boat.

Turning Point manufactures Hustler propellers to fit 6-300+hp Outboard Motors and Sterndrives Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC, Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha. Choose one of our in kitsMasterGuard installation guaranteed for life to fit your engine, then choose the propeller that matches your sailing needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive problems, and CARBON BLACK, recognized by the State of California.to cause cancer. For more information, go to P65Warnings.ca.gov.

For more information on wheel kit selection, see "Turning Point Selection Chart" or " Support Guide". Combines the latest and greatest design features of high performance stainless steel... -hustler-right-handed
MPN: 21431711
UPC: 652480102295
ASIN: B005GOPR6M
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 21431711
LSKU:
NAME: Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1317 - 3 blades - 13.25" x 17 pitch
NAME_EX: TURNING POINT HUSTLER AL RH PROPELLER 13.25" blades - 13.25" x 17 pitch
TYPE: Boat Equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> PARTS & ACCESSORIESWATERCRAFT IRES> WATERCRAFT ENGINE PARTS> WATERCRAFT PROPELLERS
Automotive Parts and Accessories
Turning Point Hustler Aluminum Right- 10.5 x 11 3-Blade Hand Propeller
Title Google: Turning Point Hustler 13.25 x 17 3-Blade Aluminum Right Hand Propeller - 21431711
Automotive Parts & Accessories
Gtags:

G Specifications:

Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1317- 3 Blades - 13.25" x 17 Pitch Product Description

Hustler - Right Hand - Aluminum Propeller - LE1/LE2 -1317- 3 -Blade - 13.25" x 17 pitch

Turning Point has built its reputation on a consistent focus on engineering the highest performing aluminum propellers in the world world. Using cutting-edge compression molding technology, they produce 3-blade Hustler propellers that perform as fast as their competitors' stainless steel propellers, and sometimes even faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake and cup all give you the best they can offer: stainless performance at aluminum prices! Not only does top speed, handling, and holeshot improve, but so does mid-range performance, which will save you a ton of gas mileage.'essence. If you want to get the most out of what your boat and engine can offer, then the Hustler 3 Blade has you covered.

The Three Blade Hustler is ideal for boat users looking to get the most out of of their boat and offer excellent bow lifting capabilities. Four-blade propellers accelerate faster, have rear lift, handle rough or following seas better, and maintain speed better when you load the boat with gear or people. Three-blade propellers work best on pontoons, while four- and three-blade propellers work well on tri-toons (recent tests have shown that pontoons and tri-toons work better with larger blade diameters than runabout or bass boat hulls).

Squeeze Cast for added strength

The performance of stainless steel is integrated into the rangeof Hustler Aluminum propellers. This is achieved through a unique blade geometry and an exclusive Turning Point, Squeeze Casting manufacturing process. This process generates the highest mechanical properties possible in a cast aluminum propeller, resulting in a tighter, high-density grain structure. Stiffer blades mean less flex and a faster propeller. Competitors' aluminum propellers are made using the ancient die-casting process that produces props with air bubbles, voids and granularity. Weak, lack of strength and rigidity. Difficult to repair. Blades flex under load, ineffective, loss of propulsive efficiency.

Long-lasting Ultracoat™ powder coat finish

Exclusive to Turning Point, Ultracoat powder coating rivals a beautiful automotive finish and is more durable than paint. Using a state-of-the-art processIn five steps, Ultracoat gives the propeller a shiny, even appearance that improves the appearance of any boat. It is the benchmark for aluminum corrosion protection. The accessory looks newer for longer! Compared to competitors' 4-step painting and coating processes which result in significantly less abrasion and corrosion resistance.

Large, free-flowing exhaust ports

Turning Point propeller housings have massive exhaust flow paths. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less backflow can generate more power. Like manifolds for your boat.

Turning Point manufactures Hustler propellers to fit Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC from 6 to 300hp and up. , Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that matches to your navigation needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm, and CARBON BLACK which is known to the State of Californialifornia as being carcinogenic. For more information, go to P65Warnings.ca.gov.

For more information on wheel kit selection, see "Turning Point Selection Chart" or " Support Guide". Combines the latest and greatest design features of high performance stainless steel...

Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1317 - 3 blades - 13.25" x 17 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set - Fits 17/32" to 1-1/4" Propeller Nuts
Anti-Corrosion Block High Performance Waterproof Grease - 2 oz Tube - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Corrosion Block Grease - (2) 3 oz Cartridges - Non-Hazardous, Non-Flammable and Non-Toxic
Grease high performance waterproof for corrosion block - 14 oz cartridge - Non-hazardous, non-flammable and non-toxicique
High performance waterproof grease for corrosion block - 16 oz jar - Non-hazardous, non-flammable and approved; Non-Toxic
Forespar Lanocote Rust and Corrosion Solution, Propeller and Bottom - 16 oz.
Sea-Dog Galvanized Propeller Wrench for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stop

Frequently asked questions (FAQ) about Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1317 - 3 blades - 13.25" x 17 pitch Who is Turning Point Propellers?
How to describe Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1317- 3 blades - 13.25" x 17 pitch?
What is the type of product?
br/> Turning side of the product?
What is the material of the Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1317 - 3 blades - 13.25" x 17 pitch?
What is the construction of the product?
What is the diameter (inches) of the product?
What is the construction of the product?
What is the diameter (inches) of the product?
Whatis the diameter of the product?
What is the pitch of the product?
How How many blades does this product have?
Who is Turning Point Propellers? Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect motors and drives from shifting shocks, shocks and harsh vibrations. It is also the most durable hub system available. How to Describe Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1317 - 3 Blades - 13.25" x 17 Pitch? For more information on wheel kit selection, see "Turning Selection Chart Points" or "Support Guide". Combines the latest and greatest design features of high performance stainless steel... What is the product type? Hustler Propeller

$56

Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1317 - 3 Blades - 13.25" x 17 Pitch

$92

Type:	Boat layout \| Propeller
Supplier:	Turning Point propellers
Weight:	6.0 lbs
Diameter (inches):	13 -1/4"
Material:	Aluminium
Pitch:	17"
Rotation:	Right
User Guide:	Download PDF
Product brochure:	Download PDF

Shipping weight:	6 .0 lb
Box sizes:	7.00 (h) x 14.00 (w) x 14 .00 (l)
Cubic feet:	1372.0
Returnable:	Yes
P65:	Yes

For an expDetailed policy, please see our shipping policy and you can find our return and refund policy here.