Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1413-4 - 4 blades - 14" x 13 pitch Boat Outfitting

Hustler - Right hand - Aluminum propeller - LE1/LE2-1413-4 - 4 blades - 14" x 13 pitch

The propeller that has put the "four" in Perfourmance! Turning Point's Four Blade Hustler revolutionized the aluminum propeller market when it was introduced over 6 years ago. No one had ever produced a cutting edge swept cleaver design. applications from 40 to 150 hp wrote the rules, proving that you can use a four-blade offering holeshot, maneuverability and stability in rough water without the loss of top speed you experience with other propellers. manufacturers These Turning Point propellers also produced up to 46% more reverse thrust than other comparable models in recent tests.

The 4-blade Hustler series is perfect for any application requiring capacity. improved acceleration, turning and loading This series of propellers is ideal for water sports,sterndrive boats, tri-toons, bayboats and any vessel that can use a stern lift. This is our best upgrade from older aluminum models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five-blade ski accessories.

Press casting for strength

The performance of stainless steel is built into the Hustler Aluminum propeller line. This is achieved through a unique blade geometry and an exclusive Turning Point, Squeeze Casting manufacturing process. This process generates the highest mechanical properties possible in a cast aluminum propeller, resulting in a tighter, high-density grain structure. Stiffer blades mean less flex and a faster propeller. Competitors' aluminum propellers are made using an old die-casting process that produces propellers with dair bubbles, voids and granularity. Weak, lack of strength and rigidity. Difficult to repair. Blades flex under load, ineffective, loss of propulsive efficiency.

Long-lasting Ultracoat™ powder coat finish

Exclusive to Turning Point, Ultracoat powder coating rivals a good girl's tomotive finish and is more durable than paint. Using a state-of-the-art five-step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances the appearance of any boat. It is the benchmark for aluminum corrosion protection. The accessory looks newer for longer! Compared to competitors' 4-step painting and coating processes which result in significantly less abrasion and corrosion resistance.

Large, free-flowing exhaust ports

Turning Point propeller housings have escape routesmassive exhaust roll. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Hustler propellers to fit Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC from 6 to 300hp and up. , Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard Lifetime Warranties Installation Kc's to fit your engine, then choose the propeller that meets your navigation needs. There are 3- and 4-blade, left- and right-spin propeller models, with a variety of diameter and pitch options, available for almost every type of boat. Turning Point accessories run faster, pull harder and handle better.

Note: A kit ofhub is required for installation of this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive problems, and CARBON BLACK, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.gov.

. Turning Point is the first company to produce aluminum propellers with two different blade shapes (which we call "dual geometry"), suitable for applications from 90 to 300 + HP and the most advanced...
PRODUCT ID : 63347
SKU: NVN-63347
CSKU: CWR-63347
REWRITE: 74458-turning-point-hustler- right-handed
MPN: 21431330
UPC: 652480206726
ASIN: B01N6X67XW
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: 21431330
LSKU:
NAME : Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1413-4 - 4 blades - 14" x 13 Pitch
NAME_EX: TURNING POINT HUSTLER AL RH PROPELLER 14" Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1413-4 - 4 Blades - 14" x 13 Pitch
TYPE: Boat Equipment | Propeller
SELLER: Turning Point Propellers
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS> WATERCRAFT PROPELLERS
Automotive Parts & Accessoriessories
Turning Point Propellers Inc 21431330 Prop Hustler 14X13 4Bl Rh
Turning Point Hustler Right Hand Aluminum Propeller Le1Le214134 14 by Hodges Marine
Automotive Parts & Accessories
Gtags:

GSpecs:

Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1413-4 - 4 Blades - 14" x 13 Pitch Product Description

Hustler - Right Hand - Aluminum Propeller - LE1/LE2 -1413 -4 - 4 blades - 14" x 13 Pitch

The accessory that put the "four" in performance! The Turning Point Four Blade Hustler revolutionized the aluminum propeller market when it was introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150 hp applications. These propellers have rewritten the rules, proving that you can use a four blade offering unprecedented holeshot, maneuverability and rough water stability without the loss of top speed you experience with propellers from other manufacturers. These Turning Point propellers also produced up to 46% more reverse thrust than other comparable designs in recent tests.

The 4-blade Hustler series is perfectfor any application requiring improved acceleration, cornering and loading capabilities. This series of accessories is ideal for watersports, stern drive boats, tri-toons, bay boats and any vessel that can use a stern lift. This is our best upgrade from the older aluminum models from the 70s, 80s, 90s and 2000s, and will outperform most newer accessories, including five-blade ski accessories.

Press casting for added strength

The performance of stainless steel is built into the Hustler Aluminum propeller line. This is achieved through a unique blade geometry and an exclusive Turning Point, Squeeze Casting manufacturing process. This process generates the highest mechanical properties possible in a cast aluminum propeller, resulting in a tighter, high-density grain structure. Stiffer blades mean lesss bending and a faster propeller. Competitors' aluminum propellers are made using an old die-casting process that produces propellers with air bubbles, voids and granularity. Weak, lack of strength and rigidity. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Finished with long-lasting Ultracoat™ powder coating

Exclusive to Turning Point, the coating Ultracoat powder rivals a fine automotive finish and is more durable than paint. Using a state-of-the-art five-step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances the appearance of any boat. It is the benchmark for aluminum corrosion protection. The accessory looks newer for longer! Compared to competitors' 4-step painting and coating processes that result in significantly less reresistance to abrasion and corrosion.

Large free-flowing exhaust ports

Turning Point propeller housings have dual channels massive exhaust flow. Their propellers have 40% more exhaust flow area compared to competitive products. More exhaust flow and less back pressure can generate more power. Like manifolds for your boat.

Turning Point manufactures Hustler propellers to fit Evinrude, Force, Honda, Johnson, Mariner, Mercruiser, Mercury, Nissan, OMC from 6 to 300hp and up. , Parsun, Suzuki, Tohatsu, Volvo Penta and Yamaha outboards and sterndrives. Choose one of our MasterGuard lifetime warranty installation kits to fit your engine, then choose the propeller that meets your navigation needs. There are 3 and 4 blade propeller models, left and right rotation, with a variety of diameter and pitch options, availablebles for almost all types of boats. Turning Point props run faster, pull harder and handle better.

Note: A hub kit is required to install this propeller. Consult the Turning Point Selection Chart or Prop Wizard™ for hub kit selection.

This product can expose you to chemicals including LEAD, known to the State of California to cause cancer, birth defects, or other reproductive harm, and CARBON BLACK which is known to the State of California to cause cancer. For more information,

Turning Point is the first company to produce aluminum propellers with two different blade shapes (we call them " double geometry"), suitable for applications from 90 to 300 + HP and the most advanced applications...

Turning Point Hustler -Right Hand - Aluminum Propeller - LE1/LE2-1413 -4 - 4 Blades - 14" x 13 Pitch Related ProductsDavis Prop Sox
Attwood Propeller Wrench Set - Fits Propeller Nuts from 17/32" to 1-1/4"
Blocks Corrosion High Performance Waterproof Grease - 2 oz Tube - Non-Hazardous, Non-Flammable and Non-Toxic
High Performance Waterproof Anti-Corrosion Block Grease - (2) 3 oz Cartridges - Non-hazardous, non-flammable and non-toxic
High performance anti-corrosion block Waterproof grease - 14 oz cartridge - Non-hazardous, non-flammable and non-toxic
High performance waterproof grease for anti-corrosion block - 16 oz jar - Non-hazardous, non-flammable and non-toxic Propeller and Bottom Corrosion Solution - 16 oz
Sea-Dog Galvanized Propeller Wrench for 1-1/16" Propeller Nut
T-H Marine Prop Master Prop Stop Propeller Stop

Frequently Asked Questions (FAQ) about Turning Point Hustler - Right Hand- Aluminum propeller - LE1/LE2-1413-4 - 4 blades - 14" x 13 Pitch Who is Turning Point Propellers?
How to describe Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2- 1413-4 - 4 blades - 14" x 13 pitch?
Rotation side of the product?
What is the material of the Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1413-4 - 4 blades - 14" x 13 pitch?
What is the diameter (inches) of the product?
What is the pitch of the product?
Who is Turning Point Propellers? Turning Point Propellersmanufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeable hub system to the market. This MasterGuard hub system helps protect motors, drives. shifting shocks, shocks and violent vibrations.system available.How to describe Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1413-4 - 4 blades - Pitch14" x 13? Turning Point is the first company to produce aluminum propellers with two different blade shapes (we call "dual geometry"), suitable for applications from 90 to 300 + HP and the most advanced... Rotation side of the product Right What is the material of the Turning Point Hustler - Right Hand - Aluminum propeller - LE1/LE2-1413-4 - 4 blades -? 14" x 13 steps? AluminumWhat is the diameter (inches) of the product? 14"What is the pitch of the product? 13

Save $74 when you purchase the Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2 - 1413-4 - 4 blades - 14" x 13 pitch for only $90 from NVN Marine! Same day dispatch before 3 p.m. Turning Point Hustler - Right hand - Aluminum propeller - LE1/LE2-1413-4 - 4 blades - 14" x 13 Pitch Technical specifications

Type:	Boat equipment \| Propeller
Supplier:	Tur propellersning Point
Weight:	6.5 lbs
Diameter (inches):	14 "
Material:	Aluminium
Pitch:	13"
Rotate:	Right
User Guide:	Download the PDF
Product brochure:	Download the PDF

Turning Point Hustler - Right Hand - Aluminum Propeller - LE1/LE2-1413-4 - 4 Blade User Reviews - 14" x 13 PitchTurning Point Hustler - Right Hand - Aluminum Propeller - LE1 /LE2-1413-4 - 4 blades - 14" x 13 pitch& Return

Shipping weight:	6.5 lbs
Box sizes:	6.00 (h) x 14.00 (w) x 14.00 (w)
Cubic feet:	1176.0
Returnable :	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy shipping and you can find our return and refund policy here.