UFlex Power A Mark II Single Motor Control Head Without Trim Boat Outfitting

Power A Mark II
Electronic Control System - Single Trimless Motor

Easy to install Power A Mark II control system provides fingertip operation of the levers accelerator and gear change. .
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to operate on mechanically controlled as well as electronic and electro-hydraulic gas and electro-hydraulic inboard, sterndrive and outboard engines. diesel.
The Power A Mark II is packed with features, including Dock Assist, which provides the operator with the ability to reduce the sensitivity of the throttle function for easier dock handling.
Others Standard features include rev synchronization, which reduces engine vibration. and improves fuel economy, a high idle feature to increase rpm where higher idleis required for cold engine operation, programmable trolling valve control and neutral warm-up.
The sleek, ergonomic control makes the Power A Mark II a capable combination for many types of applications ranging from sport boats , yachts and commercial applications.
Available with and without trim, the control features audible and visual interfaces that alert the operator to the current status of the control system.
With the ability to control up to With 2 motors from 4 different stations, the Power A Mark II is a modular and flexible system with simple to install components.
The single screen of the Power A Mark II control unit allows simple pressure programming pad with descriptive information regarding system configuration, tuning and diagnostics. The Power A Mark II is a system that can replace mechanical controls on either fully mechanical engines.ques, either on fully electronic motors, or on motors with the combination of both characteristics.

Technical characteristics:

Single/dual function lever and dual lever/dual function for shifting, throttle and trolling
Up to 4 control stations
Power supply: min 9 max 32V
Operating temperature: -25°C to +75°C
Control station functions:
- Station Select

- Engine preheating

- High idle

- Docking

- Engine synchronization

- Control valve trailing
- Electronic throttle outputs:
  - Voltage (dual output 0 - 5V and 0 - 2.5V)
  
  - PWM (0-100% , frequency from 200Hz to 1kHz )
  
  - Current (4 - 10 mA)
  
  Digital throttle output:
  
  - SAE J 1939
  
  - NMEA 2000
  
  Control valve output
  
  - Voltage (0 - 5 V)
  
  - PWM (0-100%, frequency 100 Hz to 1 kHz)
  
  - Current (4 - 20 mA)
  
  Electric shift control:

- 2 or 3 ON/OFF or proportional solenoids

- Fully shift delays adjustable

Safety devices:

Start PROTECTION in gear (start of inhibition with changed speed)
Audible and visual fault diagnostic alarm (MESSAGES READABLE ON THE CONTROL UNIT DISPLAY)
Proportional gear change delays
Programmable working parameters
Complies with IEC EN 60945 standards

EMC certification and CE MARK
Complies with:

IEC EN60945
UNI-EN ISO 11547

COMPATIBILITY WITH ALL ENGINES WITH MECHANICAL THROTTLE

COMPATIBILITY WITH ALL MOTORSELECTRONIC THROTTLE TORS

Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.

The Power A Mark II electronic system actuators cannot be installed in rooms where anti-ignition devices are required.

Power A Mark II 42009G Order unique trimless electronics The easy-to-install PowerA Mark II control system allows for fingertip operation. operation of the accelerator and gear lever. This single-function or dual-function control system uses reliable and precise digital data transmission and is specifically designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard motors.
PRODUCT ID: 45995
SKU: NVN-45995
CSKU: CWR-45995
REWRITE: 57106-uflex-power-a-mark-ii-single-engine
MPN: 42009G
br> UPC: 702755040323
ASIN: B08C1VW7L7
WSKU:
SSKU:
KSKU:
GSKU :
MSKU:
LSKU:
NAME: UFlex Power A Mark II Single Motor Control Head Without Trim
EX_NAME: UFLEX POWER A PA2-B1 SINGLE LEVER CONTROL HEAD WITHOUT TRIM
TITLE: UFlex Power A Mark II Trimless Single Motor Control Head
TYPE: Boat Outfitter | Engine Controls
SELLER: Uflex USA
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES> POWERWATER STEERING PARTS
Sports
Uflex PowerSingle Motor Control Head A Mark II Trimless
Power A Mark II 42009G Electronic Single Control Trimless
Sports
Gtags:

GSpecs:

UFlex Power A Mark II Trimless Single Motor Control Head Product Description Power A Mark II
Electronic Control System - Trimless Single Motor

Easy to install Power A Mark II control system provides fingertip operation of the throttle and shift levers.
Using reliable and precise digital data transmission, this single or dual function control system is specifically designed to operate on mechanically controlled as well as electronic and electro-hydraulic gas and electro-hydraulic inboard, sterndrive and outboard engines. diesel.
The Power A Mark II is packed with features, including Dock Assist, which provides the operator with the ability to reduce the sensitivity of the throttle function for easier dock handling.
Others Standard features include rev synchronization, which reduces engine vibration. and improve the economyie fuel, a high idle function to increase rpm where a higher idle is needed for cold engine operation, programmable trolling valve control and neutral warm-up.
The sleek, ergonomic control makes the Power A Mark II suitable for many types of applications ranging from sport boats, yachts and commercial applications.
Available with and without trim, the control features audible and visual interfaces that alert the operator. to the current state of the control system.
With the ability to control up to 2 motors from 4 different stations, the Power A Mark II is a modular and flexible system with simple to install components.
Unique Control The Power A Mark II's unit display provides simple touchpad programming with descriptive information regarding system configuration, adjustment and diagnostics.
The Power A Mark II is asystem that can replace mechanical controls or fully mechanical controls. motors, or on fully electronic motors, or on motors combining both characteristics.

Technical characteristics:

Single/double function and double lever Lever/dual function for gear change, thrTrolling
Up to 4 control stations
Power: min 9 max 32V
Operating temperature: -25°C to +75°C
Control station functions:
- Station selection

- Engine Warm-up

- High Idle

- Docking

- Engine Timing

- Trolling Valve
- Electronic throttle outputs:
  - Voltage (dual output 0 - 5V and 0 - 2.5V)
  
  - PWM (0-100%, frequency 200Hz to 1kHz)
  
  - Current (4 - 10mA)
  
  Digital throttle output:
  
  - SAE J 1939
  
  -NMEA 2000
  
  Control valve output
  
  - Voltage (0 - 5V)
  
  - PWM (0-100%, frequency from 100Hz to 1 kHz )
  
  - Current (4 - 20mA)
  
  Electric gear shift control:

- 2 or 3 ON/OFF or proportional solenoids

- Fully adjustable shift delays

Safety features:

Start PROTECTION in gear (inhibition start with gear change)
Audible and visual diagnostic alarm (MESSAGES READABLE ON THE CONTROL SCREEN)
Proportional shift delays
Programmable operating parameters
Complies with IEC EN 60945 standards

EMC certification and CE MARK
Complies with:

IEC EN60945
UNI-EN ISO 11547

COMPATIBILITY WITH ALL THROTTLE MOTORSMECHANICAL TOR

COMPATIBILITY WITH ALL ELECTRONIC THROTTLE ENGINES

Cummins, Detroit Diesel, Scania, Iveco, FPT, Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.

Power A Mark II electronic system actuators cannot be installed in rooms where ignition prevention devices are required.

Power A Mark II 42009G Unique Trimless Electronic Control The easy-to-install PowerA Mark II control system provides fingertip operation of the accelerator and shift lever. This single or dual function con control system uses reliable and precise digital data transmission and is specially designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard engines. -edge.

Frequently asked questions (FAQ) about uni motor control headthan UFlex Power A Mark II Without Trim Who is Uflex USA?
How to describe the UFlex Power A Mark II Single Motor Control Head Without Trim?
Who is Uflex USA? UfLex's commitment to providing the highest quality products and services is matched only by its commitment to developing new products using the latest materials and technologies to enhance the customer's browsing experience. From steering wheels to sophisticated electronic controls, Uflex USA has everything you need to ensure your boat will look and perform its best for many, many years. How to describe the UFlex Power A Mark II Trimless Single Motor Control Head? Power A Mark II 42009G ElectronicsUnique Trimless Control The easy-to-install PowerA Mark II control system provides fingertip operation of the accelerator and shift lever. This single function or dual function control system utIt provides reliable and precise digital data transmission and is specially designed to operate on inboard gas and diesel mechanical, electronic and electro-hydraulic engines, marine external drives and outboard engines.

The Power A Mark II& 153; The control system is a simple, inexpensive solution for single-motor applications.
Easy to install and easy to use.
Allows fingertip operation of levers throttle and gear shift, using reliable and precise use. digital data transmission

Power A Mark II& 153; is the perfect solution for aircraft without a trim system
Easy installation and fingertip operation of throttle and gear shift levers
Digital data transmission provides reliable and accurate data

Easy to install and use
At the end ofs fingers Throttle and shifter control
Reliable data transmission

Save $508 at l Purchase the UFlex Power A Trimless Mark II Single Engine Control Head for only $1,089 from NVN Marine! Free same day delivery before 3 p.m. UFlex Power A Mark II Single Motor Control Head Without Trim Videos UFlex Power A Mark II Single Motor Control Head Without Trim Technical Specifications

Type:	Boat outfitter \| Motor Controls
Seller:	Uflex USA
Weight:	3.6 lbs
User Guide:	Download PDF
Product brochure:	Download PDF

UFlex Power A Mark II Single Motor Control Head without trim userReviewsMotor Control Headsingle Uflex Power A Mark II without trim Shipping & Returns

Shipping Weight:	3.6 lbs
Box sizes:	5.00 (h) x 7.00 (w) x 9.00 (w)
Cubic feet:	315.0
Returnable:	Yes