Uncut Scanstrut ScanPod fits 0.98" to 1.33" rails with switches small displays and remote controls Boat Outfitting

Uncut ScanPod fits 0.98" to 1.33" rails with switches, small displays and remote controls

The cleanest way to mount your small electronic devices on a rail. The Rail Pod allows you to install your small displays, switches, controllers, channel counters and more on any standard or curved rail. Waterproof internal cable routing allows you to route your cables seamlessly through the bottom of the pod, the machined aluminum clamp and into the rail.

Waterproof internal cable routing allows you to do Running your cables seamlessly through the bottom of the pod, this gives you the cleanest, most user-friendly way to mount your small electronics where you need them most. Some additional work may be required on the cables and connectors of the device to ensure proper fit.

The module gasket is manufacturedqué from a silicone with high tear resistance; it has very high heat and UV resistance, so you can be sure that it will not deteriorate over time.

Features:

As standard you will receive your SPR-1u-RM uncut
Fits rails from 25mm to 33.7mm (0.98" to 1.33"). Install your electronic devices on standard and curved rails
The viewing angle can be adjusted during installation. Cables are routed internally through the clamp and onto the rail

PRODUCT ID: 90147
SKU: NVN-90147
CSKU: CWR- 90147
REWRITE: 101258-scanstrut-scanpod-uncut-fits-98-to-1-33
MPN: SPR-1U-RM
UPC: 5060114797901
ASIN: B09RGCF4QP
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Scanstrut Uncut ScanPod for 0.98" to 1.33" Rails with Switches, Small screens and remote controls
NAME_EX: SCANSTRUT UNCUT SCANPOD HASFITS FOR USE ON 0.98" TO 1.33" RAIL ON
PTITLE: Uncut Scanstrut ScanPod fits 0.98" to 1.33" rail with switches, small displays and remote controls
br>TYPE: Boat equipment | Display Stands
SELLER: Scanstrut
ELECTRONICS> MARINE ELECTRONICS

Google TitleTitle: Scanstrut Black Micro Deck Seal Connector - .08"-. 24"

Gtags:

GSpecs:

Scanstrut Uncut ScanPod fits rails from 0.98" to 1.33" with switches, small displays and remote controls Product Description

Uncut ScanPod fits rails from 0.98" to 1.33" .33" with switches, small displays and remote controls

The cleanest way to mount your small electronics on a rail. The Rail Pod allows you to install your small displays, switches, controllers, channel counters and more on any standard or curved rail. Waterproof internal cable routing allows you to route your cables seamlessly through the bottom of the pod, the machined aluminum clamp and into the rail.

Waterproof internal cable routing allows you to do Running your cables seamlessly through the bottom of the pod, this gives you the cleanest, most user-friendly way to mount your small electronics where you need them most. Some additional work may be requiredbe required on device cables and connectors to ensure proper fit.

The module gasket is made from a high tear resistance silicone; It has very high heat and UV resistance, so you can be sure that it will not deteriorate over time.

Features:

As standard you will receive your SPR-1u-RM uncut
Fits rails from 25mm to 33.7mm (0.98" to 1.33"). Install your electronic devices on standard and curved rails
The viewing angle can be adjusted during installation. Cables are routed internally through the collar and onto the rail

Frequently Asked Questions (FAQ) about the Uncut Scanstrut ScanPod, fits from 0.98" to 1.33" Rail with switches, small displays and remote controls Who is Scanstrut?
Who is Scanstrut? Scanstrut is a complete range of insta solutionsllation ready to use for every type of marine electronics. From mounting a radar on your yacht to a satcom antenna on your motorboat, Scanstrut offers a choice of solutions that guarantee quick, easy and aesthetic installation. Scanstrut products are fully approved and recommended by all major marine electronics manufacturers.

Save $98 when you purchase the uncut Scanstrut ScanPod, fits 0.98" to 1.33" rails with switches, small screens and remote controlsfor only $130 from NVN Marine! Same day dispatch before 3 p.m. Uncut Scanstrut ScanPod fits 0.98" to 1.33" rails with switches, small displays and remote controls Technical Specifications

Type:	Boat equipment \| Display Media
Supplier:	Scanstrut
Weight:	1.1 lbs

Scanstrut Uncut ScanPod fits 0.98" to 1.33" rail with switches, User Reviews on Small Screens and RemotesScanstrut Uncut ScanPod for Rail from 0.98" to 1.33" with switches, small screens and remote controls; Return

Shipping weight:	1.1 lbs
Box sizes:	5.00 (h) x 5.00 (w) x 6.00 (w)
Cubic feet:	150.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.