Veratron LinkUp - Intelligent Battery Sensor (IBS) Kit Marine Navigation & Instruments

These single sensor gateways are designed to upgrade your vessel's sensors to NMEA 2000. Available in 5 different variants: 2-in-1 Oil Temperature and Pressure, Resistive, Pyrometer, IBS and J1939. These can be easily configured via the built-in wireless interface or NMEA 2000 using our configuration tool. ISO 8846:1990 compliance completes the devices by allowing their installation in compartments.

Input signal: LIN bus
Nominal voltage: 12 V

LinkUp - Intelligent Battery Sensor (IBS) Kit

Batteries are essential when starting and running the utility vehicle engine. With Veratron's new Intelligent Battery Sensor (IBS), it's simple to monitor their status and health in real time. The system works with any OceanLink, AcquaLink or NMEA 2000 networked display and is compatible withc the latest glass cockpit systems.

The system includes a Veratron LinkUp gateway module that allows the Intelligent Battery Sensor to be connected and compatible with the NMEA 2000 network. Its internal galvanic isolation decouples the The main power supply of the LinkUp power supply, meeting NMEA requirements.

Veratron's Intelligent Battery Sensor (IBS) measures vital battery parameters: voltage, current and temperature, as well as condition load, health and function. This provides the essential information needed to plan onboard energy consumption and be aware of potential problems.

The IBS system monitors a single battery or an entire fleet. Multiple LinkUp kits can be used to provide data specific to home, starter and system specific supplies. It works with 12 V starter, gel or AGM type batteries.

The IBS simply attaches to thenegative pole terminal. Completely sealed, it has a waterproof 3A in-line fuse inside the housing. This connects to the NMEA 2000 backbone network via the innovative LinkUp Gateway module and allows Veratron's many sensors to communicate with the network.

Configuring a LinkUp gateway is simple using Veratron mobile device and companion app available on the App Store and Google Play. Each module has a built-in passive wireless antenna. Sensor settings are configured for type, instance and warning threshold on the mobile device, then applied on the LinkUp device for instant data upload.

Alternatively, devices LinkUp can be configured via NMEA 2000 with the PC. Configuration tool. This method also allows real-time reading of the analog signal. An LED on the device will light up, informing the user that LinkUp is in progresss configuration.

*Includes sensor and Link Up gateway.

Features:

NMEA 2000 certified
Wireless configuration via associated mobile app
Status LEDs
Plug-and-Play installation and configuration
Input Signal - LIN Bus
Rated Voltage - 12V

PRODUCT ID: 87029
SKU: NVN-87029
CSKU: CWR-87029
REWRITE: 98140-veratron-linkup-intelligent-battery-sensor-ibs
MPN: B00042501
UPC: 7640178729520
ASIN: B08QD7QR6F
br> WSKU:
SSKU:
KSKU:
GSKU: B00042501
MSKU:
LSKU:
NAME: Veratron LinkUp - Intelligent Battery Sensor (IBS) Kit
NAME_EX: SENSOR KIT VERATRON LINK UP INTELLIGENT BATTERY SENSOR (IBS)
TITLE: Veratron LinkUp - Intelligent Battery Sensor (IBS) Kit
TYPE: Navigation & Marine Instruments | Gauges
SELLER: Veratron
ELECTRONICS> ELCTRONIC MARINE Veratron B00042501 LINKUP - Intelligent Battery Sensor Kit (IBS)

Gtags:

GSpecs:

Veratron LinkUp - Intelligent Battery Sensor (IBS) Kit Product Description

Input signal: LIN bus
Rated voltage: 12V

LinkUp - Smart Battery Sensor Kit (IBS)

Batteries are essential for engine starting and the operation of on-board utilities. With Veratron's new Intelligent Battery Sensor (IBS), it's simple to monitor their condition and battery status.nted in real time. The system works with any OceanLink, AcquaLink or NMEA 2000 networked display and is compatible with the latest glass cockpit systems.

The system includes a Veratron LinkUp gateway module that allows the sensor to intelligent battery to be connected and compatible with the NMEA 2000 network. Its internal galvanic isolation decouples the main power supply from the LinkUp power supply, in accordance with NMEA requirements.

The intelligent battery sensor (IBS) of Veratron measures vital battery parameters: voltage, current and temperature, as well as state of charge, health and function. This provides the essential information needed to plan onboard energy consumption and be aware of potential problems.

The IBS system monitors a single battery or an entire fleet. Multiple LinkUp kits can be used to provide data specific to specific supplies in the home,to the starter and to the system. It works with starter, gel or AGM 12 V batteries.

The IBS simply attaches to the negative pole terminal. Completely sealed, it has a waterproof 3A in-line fuse inside the housing. This connects to the NMEA 2000 backbone network via the innovative LinkUp Gateway module and allows Veratron's many sensors to communicate with the network.

Configuring a LinkUp gateway is simple using a mobile device and the Veratron companion app available on the App Store and Google Play. Each module has a built-in passive wireless antenna. Sensor settings are configured for type, instance and warning threshold on the mobile device, then applied on the LinkUp device for instant data upload.

Alternatively, devices LinkUp can be configured via NMEA 2000 with the PC. Configuration tool. This method allows oother than real-time reading of the analog signal. An LED on the device will light up, informing the user that LinkUp is being configured.

*Includes sensor and Link Up gateway.

Features :

NMEA 2000 certified
Wireless configuration via associated mobile application
Status LED
Plug-and-Play installation and configuration
Input signal - LIN bus
Rated voltage - 12 V

Veratron LinkUp - Intelligent Battery Sensor (IBS) Kit Related ProductsVeratron LinkUp - Intelligent Battery Sensor (IBS)

Frequently Asked Questions (FAQ) about Veratron LinkUp - Intelligent Battery Sensor Kit (IBS) Who is Veratron?
How Describe Veratron LinkUp - Intelligent Battery Sensor Kit (IBS)?
In which country is this product manufactured ?
What is the gauge size of the product?
What is the j typetrough of the product?
What are the dimensions and weight of the Veratron LinkUp - Intelligent Battery Sensor (IBS) kit?
What is the input voltage range?
What is the series of the product?
Is it sold as a box set?
What are the manufacturer's notes on the Veratron LinkUp - Intelligent Battery Sensor (IBS) kit?
Who is Veratron? Veratron was established in 2018 to serve its customers with high quality, cost competitive products. With over 45 years of business experience, Veratron provides the market with premium instruments. Veratron has all the skills necessary to deliver high-value solutions, from first sketches to the final product. How to describe Veratron LinkUp – Intelligent Battery Sensor (IBS) Kit?

These single sensor gateways are designed to upgrade your vessel's sensors to NMEA 2000. Available in5 different variants: 2-in-1 Oil temperature and pressure, resistive, pyrometer, IBS and J1939. These can be easily configured via the built-in wireless interface or NMEA 2000 using our configuration tool. ISO 8846:1990 compliance completes the devices by allowing their installation in compartments.

Input signal: LIN bus
Rated voltage: 12V

In which country is this product manufactured? Switzerland

Input signal: LIN bus
Rated voltage: 12V

$23

Veratron LinkUp - Intelligent Battery Sensor (IBS) Kit

$214

Type:	Marine Navigation and Instruments \| Gauges
Supplier:	Veratron
Weight:	0.9 lbs
Gauge Size:	N/ A
Gauge Type:	Battery Status
Series:	Link up
Voltage - Input Range (Volts):	12V
Box:	No
Country of origin:	Switzerland
Product brochure:	Download PDF
Product installation:	Download PDF

Shipping Weight:	0.9 lbs
Box sizes:	4.00 (h) x 4.00 (w) x 16.00 (w)
Cubic feet:	256.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.