Veratron NavBox electronic control unit Boat Outfitting
The AcquaLink NavBox is the heart of the AcquaLink VDO system. It acts as a processor and signal interface. The NavBox offers a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000) or one analog engine. It also includes two VDO Sumlog impeller sensors and an analog VDO wind sensor connection, so existing VDO products can be used and brought into the digital age. NavBox reads the following analog data:• Engine oil pressure• Engine oil temperature• Engine coolant temperature• €¢ Transmission oil pressure• Fresh water, waste water and level fuel• Ammeter• Rudder angle• Engine frequency• Pyrometer• AmmeterIt also has an NMEA 0183 input and output port as well as a sound output. All received data is converted and sent to the networkNMEA 2000 water and VDO bus. This gateway feature allows engine, fluid level, pressure, temperature and other vital information to be displayed on any compatible display on NMEA.2000 Network or on VDO AcquaLink gauges or displays TFT designed. Configuration of the NavBox can be carried out using an AcquaLinkTFT and NavControl or using the intuitive VDO diagnostic tool.NavBox electronic control unit
The AcquaLink NavBox is the heart of the AcquaLink VDO Marine system. It acts as a processor and signal interface. The NavBox offers a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000) or one analog engine. It also includes two VDO Marine Sumlog paddlewheel sensors and a VDO Marine Windsensor analog connection, so older VDO Marine products can be usedand brought into the digital age.
NavSensor reads the following analog data:
- Engine oil pressure
- Engine oil temperature
- Engine coolant temperature
- Transmission oil pressure
- Fresh water, waste water and fuel level
- li>
- Voltage
- RuddeAngle r
- Motor frequency
- Battery current
- Pyrometer
It also has an NMEA 0183 input and output port as well as a buzzer output. All received data is converted and sent to the NMEA 2000 network and the VDO Marine Bus. This gateway feature allows engine, fluid level, pressure, temperature and other vital information to be displayed on any compatible display on the NMEA 2000 network or on VDO Marine AcquaLink gauges or TFT screens designed.
The configuration of the NavBox can be carried outkilled using an AcquaLink TFT and NavControl or using the intuitive VDO Marine diagnostic tool.
- Reverse polarity protection
- NMEA 2000 certified
- LED signal status indication
- Aluminium base plate
- Front and rear side protection rating IPX4
- 3x VDO Marine bus lines
- 1x J1939 CAN bus
- 1x NMEA 2000 bus
- 1x VDO Marine analog wind sensor input
- 2x marine VDO sum Log inputs
- AMP power input Super Seal
- 26-pin AUX input (analog signals, NMEA 0183)
- Operating temperature range -20°C/+70°C
Meters, each meter measures 52mm in diameter - not only does the dashboard need a series of beautiful round faces, but the VDO Viewline dashboard frame should also be used for this. These "frames" surround...
PRODUCT ID: 82529
SKU: NVN-82529
CSKU: CWR-82529
REWRITE: 93640-veratron-navbox-electronic-control-unit
MPN: A2C59501979
UPC: 7640178720916
ASIN: B09BCCDX4W
WSKU:
SSKU :
KSKU:
GSKU: A2C59501979
MSKU:
LSKU:
NAME: Veratron NavBox Electronic Control Unit
EX_NAME: VERATRON NAVBOX ELECTRONIC CONTROL UNIT
TITLE: Unit electronic control unit Veratron NavBox
TYPE: Boat fittings | Gauges
SUPPLIER: Veratron
EELECTRONICS> MARINE ELECTRONICS VDO Viewline Bezel Round - 52mm Chrome - A2C53186029-S
Category Amazon:
Gtags:
G Specs:
Veratron NavBox electronic control unit Product description The AcquaLink NavBox is the heart of the AcquaLink VDO system. It acts as a processor and signal interface. The NavBox offers a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000) or one analog engine. It also includes two VDO Sumlog impeller sensors and an analog VDO wind sensor connection, so existing VDO products can be used and brought into the digital age. NavBox reads the following analog data:• Engine oil pressure• Engine oil temperature• Engine coolant temperature• €¢ Transmission oil pressure• Fresh water, waste water and level fuel• Ammeter• Rudder angle• Engine frequency• Pyrometer• AmmeterIt also has an NMEA 0183 input and output port as well as an outpute sound. All received data is converted and sent to the NMEA 2000 network and VDO bus. This gateway function allows you to display engine, fluid level, pressure, temperature and vital information on any compatible screen on the NMEA 2000 network or on VDO AcquaLink gauges or designed TFT screens. Configuration of the NavBox can be carried out using an AcquaLinkTFT and NavControl or using the intuitive VDO diagnostic tool.
NavBox electronic control unit
The AcquaLink NavBox is the heart of the AcquaLink VDO Marine system. It acts as a processor and signal interface. The NavBox offers a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000) or one analog engine. It also includes two VDO Marine Sumlog paddlewheel sensors and a VDO Marine Windsensor analog connection, so that theold VDO Marine products can be used and brought into the digital age.
NavSensor reads the following analog data:
- Engine oil pressure
- Engine oil temperature
- Engine coolant temperature
- Transmission oil pressure
- Fresh water, waste water and fuel level
- Voltage
- Rudder angle
- Motor frequency
- Battery current
- Pyrometer
It also has an NMEA 0183 input and output port as well as a buzzer output. All received data is converted and sent to the NMEA 2000 network and the VDO Marine Bus. This gateway feature allows engine, fluid level, pressure, temperature and other vital information to be displayed on any compatible display on the NMEA 2000 network or on VDO Marine AcquaLink gauges or TFT screens designed.
Configuration of the NavBox can be done using an AcquaLink TFT and NavControl or using the intuitive VDO Marine diagnostic tool.
- Reverse polarity protection
- NMEA 2000 certified
- LED signal status indication
- Aluminium base plate
- Front and rear side protection rating IPX4
- 3x VDO Marine bus lines
- 1x J1939 CAN bus
- 1x NMEA 2000 bus
- 1x VDO Marine analog wind sensor input
- 2x VDO Marine Sumlog inputs
- AMP power input Super Seal
- 26-pin AUX input (analog signals, NMEA 0183)
- Operating temperature range -20°C/+70°C
Meters, each meter measures 52mm in diameter - not only does the dashboard need a series of beautiful round faces, but the VDO Viewline dashboard frame must also be used for this. These "frames"ntourent...
Frequently asked questions (FAQ) about the Veratron NavBox electronic control unit Who is the Veratron?
How to describe the Veratron NavBox electronic control unit?
What is the exterior color of the product?
In which country is this product manufactured?
What are the manufacturer's notes on the Veratron NavBox electronic control unit?
Who is the Veratron? Veratron was established in 2018 to serve its customers with high quality and competitively priced products. With over 45 years of business experience, Veratron provides the market with premium instruments. Veratron has all the skills necessary to deliver high-value solutions, from the first sketches to the final product. How to describe the Veratron NavBox electronic control unit? The AcquaLink NavBox is the heart of the AcquaLink VDO system. It acts as a processor and signal interface. The NavBox offers a wide range of digital and analog input possibilities. It supports up to four electronic engines (J1939 or NMEA 2000) or one analog engine. It also includes two VDO Sumlog impeller sensors and an analog VDO wind sensor connection, so existing VDO products can be used and brought into the digital age. NavBox reads the following analog data:• Engine oil pressure• Engine oil temperature• Engine coolant temperature• €¢ Transmission oil pressure• Fresh water, waste water and level fuel• Ammeter• Rudder angle• Engine frequency• Pyrometer• AmmeterIt also has an NMEA 0183 input and output port as well as a sound output. AlThe data received is converted and sent to the NMEA 2000 network and the VDO Bus. This gateway function allows you to display the engine, fluid level, pressure,a temperature and other vital information on any compatible display on the NMEA 2000 network or on VDO AcquaLink gauges or TFT displays designed. Configuration of the NavBox can be carried out using an AcquaLink TFT and NavControl or using the intuitive VDO diagnostic tool.
- The NavBox electronic control unit is at the heart of the AcquaLink system Marine
- The NavBox offers a wide range of digital and analog input possibilities. , supporting up to four separate input channels
- With the NavBox, you can monitor and control your vessel's vital functions.
- The NavBox is a state of the art electronic device featuring a wide range of input/output options.
- The NavBox is designed to be easy to install and use, with an intuitive interface.
- The NavBox electronic control unit is the core of the AcquaLink VDO Marine system.
- It acts coeven a CPU and signal interface, and offers a wide range of digital and analog input possibilities.
- The NavBox supports up to four (4) Aquabus Cables, each of which can hold up to 16 (16) devices.
- The NavBox electronic control unit is at the heart of the AcquaLink Marine system
- The NavBox offers a wide range of digital and analogue input possibilities, supporting up to four separate input channels
- With the NavBox you can monitor and control the vital functions of your vessel.
- The NavBox is a state-of-the-art electronic device with a wide range of 'input/output options.
- The NavBox is designed to be easy to install and use, with an intuitive interface.
- The NavBox electronic control unit is at the heart of the AcquaLink VDO Marine system.
- It acts as a CPU and signal interface and provides awide range of digital and analog input possibilities.
- The NavBox supports up to four (4) Aquabus cables, each with up to 16 (16) devices.
Save $71 when you purchase the Veratron NavBox Electronic Control Unit for only $641 at NVN Marine ! Free same day delivery before 3 p.m.Veratron NavBox Electronic Control Unit Technical Specifications
| Type: | Boat Equipment | Gauges |
|---|---|
| Supplier: | Veratron |
| Weight: | 1.36lb |
| Shipping Weight: | 1.36 lbs |
|---|---|
| Box sizes: | 0.00 (h) x 0.00 (w) x 0.00 (l) |
| Cubic feet: | 0.0 |
| Returnable: | Yes |
For detailed shipping terms, please see our Shipping Policy and you can find our return and refund policy here.
- MediaBox Veratron Harness
- Veratron Analog Wind Sensor Mast Cable - 30M
- Veratron mast cable for analog wind sensor - 10M
- Veratron Marine NMEA 2000 Liquid Level Sensor - 1200 to 1500 mm
- Veratron Marine Blind Plug 52 mm (2-1/16")
- Veratron Marine 4-3/8" (110 mm) AcquaLink Ground Speed 70 MPH/115 KMH - 12/24 V - Black Dial and Bezel
- ViewLine Veratron Marine 110 mm Scope - Flat - Chrome
