Vesper VHF/AIS antenna Marine Navigation & Instruments

VHF/AIS Antenna

Finally an antenna designed for both VHF and AIS!

This antenna is specially designed by Vesper Marine for use with our antenna splitter. Until now, you had to choose an AIS tuned antenna, optimized for AIS frequencies but offering lower performance for your VHF radio. You may also choose an antenna that is designed for VHF radio communications but is not optimal for AIS. Either of these solutions works, but we have a better solution.

We've created an antenna that solves this dilemma. It has two key features which combine to make it ideal for use with our antenna splitter:

A wide 6 MHz bandwidth means it will cover 3 MHz above and below below the center point
The center frequency of 159 MHz provides excellent performance for VHF radio (156 MHz) and AIS (162MHz)

The result is an antenna with higher performance than other models. It has a VSWR of less than 1.5:1 at 156 MHz up to 162 MHz. With other VHF or IS antennas, you will only get low VSWR at one end of the frequency band, but not both.

We put it all in the same physical package as our most popular antenna. It is perfect for installations where the lowest possible wind speed is a requirement. A detachable cable makes installation and maintenance easier and allows any length of cable to be used. It mounts easily to a flagpole but is also suitable for mounting almost anywhere thanks to the included L-bracket. Examples of our customers' mounting locations are along side solar panels, on the sides of the bimini, on an arch, above a radar or along the edge of a cabin roof. The L-bracket can be removed, allowing a fleEven greater mounting xibility.

Key Features:

Specially designed 1.0M stainless steel antenna
Stainless steel whip easily replaceable in case of loss or damage
Optimized for sharing between VHF radio and AIS transponder
Includes SO239 socket and mounting bracket
Perfect for mastheads or installations where the L bracket fits
Easily adapted to most mounting configurations installation
Removable cable allows use of any length

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other harm. other reproduction issues For more information, go to P65Warnings..ca.gov.

PRODUCT ID: 55876
SKU: NVN-55876
CSKU: CWR-55876
REWRITE: 66987 -vesper-vhf-ais -antenna
MPN: VA159
UPC: 799439044241
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VESPER VHF/AIS ANTENNA
NAME_EX:
PTITLE: Vesper VHF/AIS Antenna
TYPE: Navigation and maritime instruments | AIS Systems
SELLER: Vesper
ELECTRONICS> MARINE ELECTRONICS> MARINE RADIOS

Gtags:

Specifications G:

Vesper VHF/AIS Antenna Product description VHF/AIS Antenna

Finally an antenna designed for both VHF and AIS!

This antenna is specially designed by Vesper Marine for use with our antenna splitter. Until now, you had to choose an AIS tuned antenna, optimized for AIS frequencies but offering lower performance for your VHF radio. You may also choose an antenna that is designed for VHF radio communications but is not optimal for AIS. Either of these solutions works, but we have a better solution.

We've created an antenna that solves this dilemma. It has two key features which combine to make it ideal for use with our antenna splitter:

A wide 6 MHz bandwidth means it will cover 3 MHz above and below below the center point
The center frequency of 159 MHz offers excellent performanceances for VHF radio (156 MHz) and AIS (162 MHz)

The result is an antenna with higher performance than other models. It has a VSWR of less than 1.5:1 at 156 MHz. The way up to 162 MHz. With other VHF or AIS antennas, you will only get low VSWR at one end of the frequency band, but not both.

We put all of this in the same physical package as our most popular antenna. It is perfect for installations where the lowest possible wind speed is a requirement. A detachable cable makes installation and maintenance easier and allows any length of cable to be used. It mounts easily to a flagpole but is also suitable for mounting almost anywhere thanks to the included L-bracket. Examples of our customers' mounting locations are along side solar panels, on the sides of the bimini, on an arch, above a radar or along the edge of a cabin roof. The supplementL-shaped antenna can be removed, allowing even greater mounting flexibility.

Key features:

1.0M stainless steel antenna specially designed
Stainless steel whip easily replaceable in case of loss or damage
Optimized for sharing between VHF radio and AIS transponder
Includes SO239 socket and mounting bracket
Perfect for mastheads or installations where the L bracket fits
Easily suitable for most installation configurations
Detachable cable allows use of any length

This product can expose you to chemicals known to the State of California to cause cancer. birth defects or other reproductive problems. For more information,

Frequently Asked Questionss (FAQ) about the VESPER VHF/AIS ANTENNA Who is the Vesper?
Who is the Vesperal? Vesper is dedicated to on-water safety for sail, power and work boats. Vesper has launched many innovative and award-winning products that are internationally recognized and have delighted customers around the world. Every Vesper Marine product is designed for performance, reliability and ease of use. In addition to product excellence, you will benefit from exceptional technical support both before and after your purchase.

Save $20 when you purchase the Vesper VHF/AIS Antenna for just $84 from NVN Marine! Same day dispatch before 3 p.m. Vesper VHF/AIS Antenna Technical Specifications

Type:	Navigation and Marine Instruments \| AIS Systems
Supplier:	Vesper
Weight:	1.0 lbs
Construction:	Stainless steel
Antenna band :	AIS

Vesper VHF/AIS Antenna User ReviewsVesper VHF/AIS Antenna Shipping and Returns

Shipping Weight:	1.0 lbs
Sizes boxes:	2.00 (h) x 2.00 (w) x 44.00 (w)
Cubic Feet:	176.0
Returnable:	Yes
P65:	Yes

For detailed shipping conditions, please see our Shipping Policy and you can find our Return and Refund Policy here.