Victron Argofet 200-2 battery isolator - 200AMP - 2 batteries Victron Energy

Argofet 200-2 battery isolator - 200AMP - 2 batteries

In the same way as Argodiode battery isolators, Argofet isolators allow two or more batteries to be charged simultaneously. more from an alternator (or single output battery charger) without connecting the batteries. For example, discharging the accessory battery does not cause the starting battery to discharge.

Unlike diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0.02 Volt at low currents and averages 0.1 Volt at higher currents.

When using Argofet battery isolators, it does not It is not necessary to also increase the output voltage of the alternator. However, care must be taken to ensure that the cable lengths are short and of sufficient cross-section.

Example: When a current of 100 A flowsin a cable with a cross section of 50 mm² (AWG 0) and a length of 10 m (30 ft), the voltage drop on the cable will be 0.26 Volts. Similarly, a current of 50 A through a cable of cross section of 10 mm² (AWG 7) and length of 5 m (15 feet), this will result in a voltage drop of 0.35 volts!

The alternator powers the input

Some alternators need DC voltage on the B+ output to start charging. Direct current will be present when the alternator is directly connected to a battery. Inserting an Argodiode or Argofet splitter will, however, prevent any voltage/current feedback from the batteries to the B+, and the alternator will not start.

The new Argofet isolators have a special power input limited in current which will power the B+ when the motor on/off switch is closed.

Specifications:

Maximum charging current (A): 200
Alt currentMaximum ernator (A): 200
Number of batteries: 2
Battery nominal voltage: 12 V and 24 V
Connection: M8 bolts
Weight kg (lbs): 1.4 (3.1)
Dimensions (H x W x D): 65 x 120 x 200 mm (2.6 x 4.7 x 7.9 inches)

Please contact your reseller for any return, repair, or support issues related to this product.

PRODUCT ID: 88341
SKU: NVN-88341
CSKU: CWR-88341
REWRITE: 99452-victron-argofet-200-2-battery-isolator-200amp
MPN: ARG200201020
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON ARGOFET 200-2 TWO 200A BATTERIES
NAME_EX :
PTITLE: Victron Argofet 200-2 Battery isolator - 200AMP - 2 batteries
TYPE:
SELLER: Victron Energy

Gtags:

GSpecs:

Victron Argofet 200-2 battery isolator - 200 AMP - 2 batteries Product description

Argofet 200-2 battery isolator - 200 AMP - 2 batteries

Also, to battery isolators Argodiode, Argofet Isolators allow two or more batteries to be charged simultaneously from an alternator (or single output battery charger) without connecting the batteries. For example, discharging the accessory battery does not cause the starting battery to discharge.

Unlike diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop is less than 0.02 Volt at low currents and averages 0.1 Volt at higher currents.

Example: When a current of 100 A flows in a cable with a section of 50 mm² (AWG 0) and 10 m in length (30 ft), the drop voltage on the cable will be 0.26 Volts. Similarly, a current of 50 A passing through a cable with a cross section of 10 mm² (AWG 7) and a length of 5 m (15 ft) will result in a voltage drop of 0.35 volts!

Alternator Powers the input

Some alternators require DC voltage at the B+ output to begin charging. Direct current will be present when the alternator is directly connected to a battery. Inserting an Argodiode or Argofet splitter will, however, prevent any voltage/current feedback from the batteries to the B+, and the alternator will not start.

The new Argofet isolators have a special power input limited in current which will power the B+ when the motor on/off switch is closed.

Specifications:

CoMaximum charging current (A): 200
Maximum alternator current (A): 200
Number of batteries: 2
Battery nominal voltage: 12 V and 24 V
Connection: M8 bolts
Weight kg (lbs): 1.4 (3.1)
Dimensions (H x W x D) : 65x 120 x 200 mm (2.6 x 4.7 x 7.9 inches)

Please contact your dealer for any returns, repairs, or support issues related to this product.

Save $21 on the purchase of the Victron Argofet 200-2 Battery Isolator - 200 AMP - 2 batteriesfor only $119 from NVN Marine! Same day dispatch before 3 p.m. Victron Argofet 200-2 battery isolator - 200 AMP - 2 batteries Technical specifications

Supplier:	Victron Energy

Victron Argofet 200-2 battery isolator - 200 AMP - 2 batteries User reviewsVictron Argofet 200-2 battery isolator - 200 AMP - 2 batteries Shipping & Return

For detailed shipping policy, please see our Shipping Policy and you can find our Return & Refund Policy here.