Victron BlueSolar MPPT charge controller - 100 V - 15 A Electrical

BlueSolar MPPT charge controller - 100 V - 15 A

Features:

Power point Ultra-fast Maximum Tracking (MPPT) Especially in cloudy skies, when the light intensity changes continuously, an ultra-fast MPPT controller will improve energy harvesting by up to 30% compared to PWM charge controllers and up to 10% compared to slower MPPT controllers. .
Load output Excessive battery discharge can be avoided by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery life. The load output is short circuit resistant. Some loads (especially inverters) can be connected directly to the battery and the inverter remote controlulor connected to the load output. A special interface cable may be required, please consult the manual.
Battery life: the smart battery man When a solar charge controller is not able to recharge the battery to its full capacity in a day, the result is often that the battery oscillates continuously between a "partially charged" state and the "end of discharge" state. This mode of operation (no regular full recharge) will destroy a lead-acid battery in a few weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if necessary, slightly increase the level of load disconnection day by day (i.e. disconnect the load earlier) until the solar energy collected is sufficient to recharge the battery to almost 100%. %. From this moment on, the load disconnection level will be modulated so as to reach a near recharge.e by 100% approximately once a week.
Programmable battery charging algorithm See the software section on our website for more details
Day/night sync and light dimming option See the software section on our website for more details
>Programming, real-time data ta display options and history - Color Control GX or other GX devices: see Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle required

Warranty information

This product can expose you to chemicals known to the State of California to cause cancer, birth defects or other reproductive problems. For more information, go to P65Warnings.ca.g.ov.

BlueSolar MPPT charge controller - 100 V - 15 A

Features:

Ultra-fast Maximum Power Point Tracking (MPPT) Especially in case of cloudy sky, when the light intensity changes continuously, ultra-fast MPPT controller will improve the recovery of energy up to 30% compared to PWM charge controllers. and up to 10% compared to slower MPPT controllers.
Load output Excessive battery discharge can be avoided by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a preset voltage. Alternatively, an intelligent battery management algorithm can be chosen: see Battery life. The load output is short circuit resistant. Certain loads (in particular onduleurs) can be connected directly to the battery and the inverter remote control connected to the load output. A special interface cable may be required, please consult the manual.
Battery life: intelligent battery management When a solar charge controller is not able to recharge the battery to its full capacity in a day, the result is often that the battery passes continuously from one "partial charge" cycle to the next. state and "end of discharge" state. This mode of operation (no regular full recharge) will destroy a lead-acid battery in a few weeks or months. The Battery Life algorithm will monitor the state of charge of the battery and, if necessary, slightly increase the level of load disconnection day by day (i.e. disconnect the load earlier) until the solar energy collected is sufficient to recharge the battery to almost 100%. %. FromAt this time, the load disconnection level will be modulated so as to achieve a recharge close to 100% approximately once a week.
Programmable battery charging algorithm See the software section on our website for more details
Day/night timer and light dimming option See the soSection ftware on our website for details
Scheduling, real-time data and history display options - Color Control GX or other GX devices: see Venus documents on our website. - A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle required

Warranty information

This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information,

Please contact your dealer for any return, repair, or support issues related to this product.

Maximum Power Point Tracking ( MPPT ) is a technique used to obtain the maximum possible power from solar panels. This is achieved by applying a variable load to the panel to obtain the optimum output voltage and then converting this voltage to the optimum voltage required by the battery. The effect of this is that production can be increased by up to 30% compared to similar panels not using this technology. The solar controller can automatically adjust 12 or 24 volt systems. Especially in the case of dark clouds in the sky, when the light intensity is constantly changing, compared with the PWM charge controller, the ultra-fast MPPT controller will increase the energy collection up to 30%, by compared to the slower MPPT controller. Will increase up to 10%. The programUltra-fast intelligent maximum power point tracking (MPPT) ram automatically detects 12 or 24 volts, can be used with any panel output voltage up to 100 volts, 15 amp maximum load, 12 or 24 volts built-in overheat protection reverse polarity output shore power protection Circuit Protection The internal circuit is IP protected. Click to get the technical sheet. Read the blog article. Programming requires the use of a VE-USB controller or Bluetooth dongle. NEW UL 1741 and CSA C22.2 certification. Read this blog post. The solar panel can provide a higher input voltage for the MPPT controller, making it more efficient and effective. This can also reduce voltage drop in the wires. The first digit of the model number is the maximum input voltage and the second digit is the maximum amperage on the output side.

Victron BlueSolar MPPT Charge Controller - 100V - 15A Related ProductsSamlex Portable Solar Charging Kit - 90W
Samlex Portable Solar Charging Kit - 135W
Xantrex 100W Portable Solar Kit
Samlex Adjustable Tilt Bracket for 28" Solar Panel
Victron MC4 Solar Connection Pair - 1 x Male and 1 x Female

Frequently Asked Questions (FAQ) about the Victron BlueSolar MPPT charge controller - 100V - 15AMP Who is Victron Energy?
How to describe the Victron BlueSolar MPPT charge controller - 100V - 15AMP?
Is this product portable?
What is the output voltage?
What is it? the output voltage?
What is the input voltage?
How many bthanks for charging?
Who is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel in the combinationefficiency of two or more separate energy sources, are recognized internationally as the professional choice for resilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and more. How to describe the Victron BlueSolar MPPT charge controller - 100 V - 15 AMP? Maximum Power Point Tracking (MPPT) is a technique used to obtain the maximum possible power from solar panels. This is achieved by applying a variable load to the panel to obtain the optimum output voltage and then converting this voltage to the optimum voltage required by the battery. The effect is that efficiency can be increased by up to 30% compared to similar panels that do not use this technology. The solar controller can adjust autoautomatically 12 or 24 volt systems. Especially in the case of dark clouds in the sky, when the light intensity is constantly changing, compared with the PWM charge controller, the ultra-fast MPPT controller will increase the energy collection up to 30%, by compared to the slower MPPT controller. Will increase up to 10%. Ultra-fast intelligent Maximum Power Point Tracking (MPPT) program automatically detects 12 or 24 volts, can be used with any panel output voltage up to 100 volts, 15 amp maximum load, 12 or 24 volt built-in overheat protection reverse polarity output shore power protection Circuit Protection The internal circuit is IP protected. Click to get the technical sheet. Read the blog article. Programming requires the use of a VE-USB controller or Bluetooth dongle. NEW UL 1741 and CSA C22.2 certification. Read this blog post. The solar panelre can provide higher input voltage for MPPT controller, male king is more effective and efficient. This can also reduce voltage drop in the wires. The first digit of the model number is the maximum input voltage and the second digit is the maximum output side amperage. Is this product portable? NoWhat is the output voltage? 12v/24vWhat is the output voltage? 15aWhat is the input voltage? 18-75vHow many banks cover the fees? 1

Save $10 when you purchase the Victron BlueSolar MPPT Charge Controller - 100V - 15 AMP for only $61 at NVN Marin! Same day dispatch before 3 p.m. Victron BlueSolar MPPT Charge Controller - 100V - 15 AMP Videos Victron BlueSolar MPPT Charge Controller - 100V - 15 AMP Technical Specifications

Type:	Electric \| Battery chargers
Supplier:	Victron Energy
Weight:	1.2 lbs
Charger Input - Voltage:	18-75V
Charger Output - Amps:	15a
Voltage Charger Output:		12v/24v
Charging Banks:	1
Mobile:	No
User Guide:	Download PDF
Product Installation:	Download PDF

Victron BlueSolar MPPT charge controller - 100 V - 15 A User reviewsCharge controller MPPT Victron BlueSolar - 100V - 15A Shipping & Returns

Shipping Weight:	1.2 lbs
Box sizes:	2.00 (h) x 6.00 (w) x 6.00 (w)
Cubic feet:	72.0
P65:	Yes

For detailed shipping terms, please see our Shipping Policy and you will find our Return Policy and Refund Policy here.