Victron BMV-700H High Voltage Battery Monitor (60-385VDC) Electrical

BMV-700H High Voltage Battery Monitor (60-385 V DC)

The BMV-700H is a high-precision battery monitor specifically designed for systems with a high voltage. battery voltage ranging from 60 to 385 volts.

These battery monitors calculate the state of charge of a battery and keep track of the amp hours consumed by the battery by integrating the incoming current or coming out of the battery. .

They both come with a round head unit, square bezel cover, screw ring for mounting, 10m UTP RJ12 cable, power cable with fuse and a 500 A/50 mV shunt. Due to the high voltage application, the shunt is housed in a special housing.

Battery "Fuel Gauge", Remaining Time Indicator and Much More

Remaining battery capacity depends on amp hours consumed, discharge current, temperature and age of the batteryttery. Complex software algorithms are required to account for all of these variables.

In addition to basic display options, such as voltage, current and amp-hours consumed, the BMV-700 series also displays charging status, remaining time and power consumption in watts.

Easy to install

All electrical connections are made on the Quick connect PCB on current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10 m) and battery cable with fuse (2 m); No other components are required.

A separate front bezel is also included for square or round display, as well as a mounting ring for rear mounting and screws for front mounting.

BMV-700H: Voltage range 60 to 385 VDC

No additional parts are required. Note: This is only suitable forx systems with grounded negative (battery monitor is not isolated from shunt).

Features:

Battery voltage , current, power, amp-hours consumed and state of charge
Time remaining at current rate of discharge
Programmable visual and audible alarm
Programmable relay, for turn off non-critical loads or run a generator when needed
500 Amp quick-connect shunt and connection kit
Shunt selection capacity up to 10,000 amps
VE.Direct communications port
Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
Wide input voltage range: 6.5 to 95 V
High current measurement resolution: 10 mA (0.01A)
Low current consumption: 2 .9 Ah per month (4 mA) at 12 V and 2.2 Ah per month (3 mA) at 24 V

SpecialBMV-700H specifications:

Supply voltage Range: 60 - 385 V DC
Current consumption, backlight off: <4 mA
Input voltage range, auxiliary battery: n. a.
Battery capacity (Ah): 1 - 9999 Ah
Operating temperature range: -40 +50°C (-40 - 120°F)
Measures second battery voltage, or temperature, or midpoint: no
TemperatureMeasuring range: n. a.
VE.Direct communication port: Yes
Relay: 60 V / 1A normally open (function can be reversed)

Resolution and accuracy (with 500 A shunt):

Current: ± 0.01 A
Voltage: ± 0.01 V
Ampere Hours: ± 0.1 Ah
State of Charge: (0 – 100%) ± 0.1%
Remaining Time: ± 1 min
Temperature: n. a.
Current measurement accuracy: ±0.4%
Voltage measurement accuracy: ±0.3%

Installations and dimensions:

Installation: Flush mounting
Front: 63 mm diameter
Front frame: 69 x 69 mm (2.7 x 2.7 in)
Shunt connection bolts: M10 (0.3937 in)
Body diameter and depth: 52 mm (2 .0 inches) and 31 mm (1.2 inches)
Protection category: IP55 (not intended for outdoor use)

Standards:

Safety: EN 60335-1
Emission / Immunity: EN 55014-1 / EN 55014-2
Automotive: ECE R10-4 / EN 50498

Accessories:

Shunt (included): 500A / 50mV
Cables (included): 10 meters UTP 6 conductors with RJ12 connectors and cable with 1 A slow blow fuse for '+' connection
Temperature sensor: optional (ASS000100000)

Please contact your dealer for any return, repair, or support issues related to this product.

Please contact your dealer for any return, repair, or support issues related to this product.

PRODUCT ID: 99782
SKU: NVN-99782
CSKU: CWR-99782
REWRITE: 110893-victron-bmv-700h-high-voltage-battery-monitor- 60-385 V DC
MPN: BAM010700100
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON BMV-700H HIGH VOLTAGE BATTERY MONITOR 60-385VDC
NAME_EX:
PTITLE: Victron BMV-700H High Voltage Battery Monitor (60-385VDC)
TYPE: Electric | Meters and monitoring
SELLER: Victron Energy
VEHICLES AND PARTS>VEHICLE PARTS AND ACCESSORIES> WATERCRAFT PARTS AND ACCESSORIES

Gtags:

GSpecs:

Victron BMV-700H High Voltage Battery Monitor (60-385 V DC) Product Description

BMV-700H High Voltage Battery Monitor (60-385 V DC)

The BMV-700H is a high precision battery monitor specifically designed for systems with high battery voltage ranging from 60 to 385 volts.

These battery monitors calculate the state of charge of a battery and track the amp hours. consumed by the battery by integrating the current flowing into or out of the battery.

They both come with a round head unit, a square cover, a screw ring for mounting, a UTP cable 10m RJ12, power cable with fuse and 500A/50mV shunt. Due to the high voltage application, the shunt is housed in a special housing.

Battery "Fuel Gauge", Remaining Time Indicator and Much More

The remaining battery capacity depends on the amp-hours consumed, the cdischarge rate, temperature and battery age. Complex software algorithms are required to account for all of these variables.

In addition to basic display options, such as voltage, current and amp-hours consumed, the BMV-700 series also displays charging status, go time and power consumption in watts.

Easy to install

All electrical connections are made on the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10 m) and battery cable with fuse (2 m); No other components are required.

A separate front bezel is also included for square or round display, as well as a mounting ring for rear mounting and screws for front mounting.

BMV-700H: Voltage range 60 to 385 VDC

No additional parts are required.Note: This is only suitable for systems with grounded negative (the battery monitor is not isolated from the shunt).

Features:

Battery voltage, current, power, amp-hours consumed and state of charge
Time remaining at current discharge rate
Programmable visual and audible alarm
Programmable relay, to turn off non-critical loads or run a generator when needed
500A quick connect shunt and connection kit
Shunt selection capability up to 'at 10,000 A
VE.Direct communications port
Stores a wide range of historical events, which can be used to evaluate usage patterns and status of the battery.
Wide input voltage range: 6.5 to 95 V
High current measurement resolution: 10 mA (0.01A)
Low current consumption: 2.9 Ah per month (4 mA) at 12 V and 2.2 Ah per month (3 mA)at 24 V

BMV -700H Specifications:

Supply voltage range: 60 - 385 VDC
Current consumption, backlight off: <4 mA
Input Voltage range, auxiliary battery: n. a.
Battery capacity (Ah): 1 - 9999 Ah
Operating temperature range: -40 +50°C (-40 - 120°F)
Measuring Second battery voltage, or temperature, or midpoint: no
Temperature measurement range: n. a.
VE.Direct communication port: Yes
Relay: 60 V / 1A normally open (function can be reversed)

Resolution and accuracy (with 500 A shunt):

Current: ± 0.01 A
Voltage: ± 0.01 V
Ampere Hours: ± 0.1 Ah
State of Charge: (0 – 100%) ± 0.1%
Remaining Time: ± 1 min
Temperature: n. a.
Current measurement accuracy: ±0.4%
Current measurement accuracy:voltage: ± 0.3%

Installations and dimensions:

Installation: Flush mounting
Front: 63 mm diameter
Front frame: 69 x 69 mm (2.7 x 2.7 inches)
Shunt connection bolts: M10 (0.3937 inches)
Body diameter and depth: 52 mm (2.0 inches) and 31 mm (1.2 inches)
Protection category: IP55 (not intended for outdoor use)

Standards:

Safety: EN 60335-1
Emission / Immunity: EN 55014- 1 / EN 55014-2
Automotive: ECE R10-4 / EN 50498

Accessories:

Shunt (included): 500A / 50mV
Cables (included): 10 meters UTP 6 conductors with RJ12 connectors and cable with 1 Amp slow blow fuse for '+' connection
Temperature Sensor: Optional (ASS000100000)

Please contact your dealer for any returns, repairs or support issues related to thisproduct. product.

Please contact your dealer for any returns, repairs, or support issues related to this product.

Frequently Asked Questions Questions (FAQ) about VICTRON BMV-700H HIGH VOLTAGE BATTERY MONITOR 60-385VDC Who is Victron Energy?
Who is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel at efficiently combining two or more separate power sources, are recognized internationally as the professional choice for resilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and much more.

Save $89 on purchaseVictron BMV-700H High Voltage Battery Monitor (60-385VDC) for only $506 from NVN Marine! Free same day delivery before 3 p.m. Victron BMV-700H High Voltage Battery Monitor (60-385V DC) Videos Victron BMV-700H High Voltage Battery Monitor (60-385V DC) Technical Specifications

Type:	Electric \| Meters and monitoring
Supplier:	Victron Energy
User Guide:	Download PDF
Product Brochure:	Download PDF

Victron BMV-700H High Voltage Battery Monitor (60-385V DC) User Reviews Victron High Voltage Battery Monitor BMV-700H (60-385V DC) Shipping & Return

For detailed shipping policy, please check our shipping policy and you can find our return & refund policyent here.