Victron Cerbo GX MK2 Electrical
Cerbo GX MK2
The Victron Cerbo GX MK2 is the most commonly used GX product. This communications center features hardware revision 2 with two VE.Can ports, 3 USB host ports and digital input pulse counting.
The Cerbo GX MK2 is different from the Cerbo Gx because it has:
- Two fully functional CAN bus ports are called VE.Can 1 and VE.Can 2. Instead of one VE.Can port and d 'a BMS-Can
- VE.Can 1 port is isolated (on previous models there was no isolated Canbus port)
- The RJ-45 jacks have been rotated 180 degrees, so it's easier to remove cables
- All three USB ports are fully functional (instead of two functional and one for power (to a GX Touch) only)
- Digital inputs can perform pulse counting
This communication center allows users to always have controle perfect on the system wherever they are and optimize its performance. Connect via the Victron Remote Management (VRM) portal or access directly using the separate GX Touch 50, an MFD or Victron's VictronConnect app with its added Bluetooth capability. This latest addition to the GX range combines all the best in connectivity, redefining smart power solutions in every way.
Perfect monitoring and control
Instantly monitor battery charge status, power consumption and energy harvesting from PV, generator and mains, or check tank levels and temperature measurements. Easily control shore power input current limit, start/stop (auto) generator(s), or change any setting to optimize the system. Follow alerts, carry out security checksDiagnose and resolve problems remotely. The Cerbo GX MK2 turns any power challenge into an effortless experience.
Maximize the performance of your system
The Cerbo GX MK2 maximizes the performance of components of a system in real time and keeps them perfectly tuned. This case has two fully functional CAN bus ports, called VE.Can 1 and VE.Can 2. Instead of one VE.Can port and one BMS-Can port. VE.Can 1 is isolated. In previous models, there was no isolated Canbus port. This can be useful when a Lynx Smart BMS (VE.Can connection) as well as an RV-C port are required.
Magnify your view
The (optional) GX MK2 Touch 50 display gives users an instant overview of their system and adjusts settings in the blink of an eye. Its ultra-thin 5-inch waterproof design, top-mountable configuration, and simple installation provide plenty of flexibilitywhen creating a crisp, clean dashboard.
Simple assembly and configuration
The Cerbo GX MK2 is now optimized to more than meet to the standards of professional installers. The device can easily be mounted on a DIN rail (with a small DIN35 adapter, not included), and its separate touchscreen can now be bolted to the top of a dashboard, eliminating the need to create perfect cutouts (as with Color Control GX). MK2). It is connected via a single cable, eliminating the hassle of having to run numerous wires to a dashboard. Its new Bluetooth functionality allows for quick connection and setup via the VictronConnect app.
Outsmart any energy challenge
The Cerbo GX MK2 serves multiple purposes infinite, perfectly extending control to the most diverse applications. For solutions including generators, such as marines, or backup and off-grid solutions, it will automatically start/stop the generator or delay ignition until the end of the "quiet" periods. It maintains 100% battery backup for energy storage systems, intervenes in power outages and diverts excess (solar) energy to self-consumption, saving users money . For motorhomes and emergency vehicles, it ensures the impeccable functioning of vital systems. But that's just to name a few...
Specifications:
- Remote Console: Yes
- Buzzer: Yes
- VE.Direct ports (always isolated): 3
- VE.Bus (always isolated): 2 RJ45 sockets in parallel
- VE.Can: Yes, VE .Can 1 jesolated & VE.Can 2 non-isolated
- USB: 3 USB Host ports
- Ethernet: RJ45 10/100 jack - isolated except shielding
- WiFi: Built-in
- Bluetooth Smart: Ori
- Micro SD card slot: SDHC cards up to max. 32 GB (5)
- Second CAN bus port (BMS-Can): Yes - see VE.Can
- BMS-Can port: No
- Built -in RS485: No
- Programmable relay: 2 x NO/NC (8), DC up to 30VDC: 6A, DC up to 70VDC: 1A, AC: 6A, 125VAC
- Resistive Tank Level Inputs: 4
- Temperature Sensing Inputs: 4
- Digital Inputs: 4
Performance specifications:
- CPU: Dual-core
- RAM: 1 GB
- Max. VE.Direct devices: 15
Other specifications:
- Supply voltage: 8 - 70 VDC
- Power: 2.5 to 5 W
- Mounting: wall or DIN rail (35 mm)
- External dimensions (H x W x D): 478 x 154 x 48 mm
- Operating Temperature: -20 to +50 degrees C
- Battery Backup Clock: Yes
- 5VOutput: No
Standards:
- Safety: IEC 62368-1
- EMC: EN 301489 -1, EN301489-17
- Automotive: ECE R10-6
PRODUCT ID: 102424
SKU: NVN-102424
CSKU : CWR-102424
REWRITE: 113535-victron-cerbo-gx-mk2
MPN: BPP900451100
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON CERBO GX MK2
NAME_EX:
PTITLE: Victron Cerbo GX MK2
TYPE: Electric | Accessories
SELLER: Victron Energy
VEHICLES AND PARTS> VEHICLE PARTS AND ACCESSORIES> POWERWATER PARTS AND ACCESSORIES
Gtags:
GSpecs:
Victron Cerbo GX MK2 Product Description
Cerbo GX MK2
The Victron Cerbo GX MK2 is the most commonly used GX product. This communications center features hardware revision 2 with two VE.Can ports, 3 USB host ports and digital input pulse counting.
The Cerbo GX MK2 is different from the Cerbo Gx because it has:
- Two fully functional CAN bus ports are called VE.Can 1 and VE.Can 2. Instead of one VE.Can port and d 'a BMS-Can
- VE.Can 1 port is isolated (on previous models there was no isolated Canbus port)
- The RJ-45 jacks have been rotated 180 degrees, so it's easier to remove cables
- All three USB ports are fully functional (instead of two functional and one for power (to a GX Touch) only)
- Digital inputs can perform pulse counting
This The communication center allowsusers to always have perfect control over the system wherever they are and to optimize its performance. Connect via the Victron Remote Management Portal (VRM), or direct access, using the separate GX Touch 50, an MFD, or Victron's VictronConnect app with its added Bluetooth capability. This latest addition to the GX range combines all the best in connectivity, redefining smart power solutions in every way.
Perfect monitoring and control
Instantly monitor battery charge status, power consumption and energy harvesting from PV, generator and mains, or check tank levels and temperature measurements. Easily control shore power input current limit, start/stop (auto) generator(s), or change any setting to optimize the system. STrack alerts, perform diagnostic checks, and resolve issues remotely. The Cerbo GX MK2 turns any power challenge into an effortless experience.
Maximize the performance of your system
The Cerbo GX MK2 maximizes the performance of components of a system in real time and keeps them perfectly tuned. This speaker has two fully functional CAN bus ports, called VE.Can 1 and VE.Can 2. Instead of one VE.Can port and one BMS-Can port. VE.Can 1 is isolated. In previous models, there was no isolated Canbus port. This can be useful when a Lynx Smart BMS (VE.Can connection) as well as an RV-C port are required.
Magnify your view
The (optional) GX MK2 Touch 50 display gives users an instant overview of their system and adjusts settings in the blink of an eye. Its ultra-thin 5-inch waterproof design, top-mountable configuration, and insimple installation provide a lot of flexibility when creating a crisp and clean dashboard.
Simple assembly and configuration
The Cerbo GX MK2 is now optimized to more than meet the standards of professional installers. The device can easily be mounted on a DIN rail (with a small DIN35 adapter, not included), and its separate touchscreen can now be bolted to the top of a dashboard, eliminating the need to create perfect cutouts (as with the Color Remote GX MK2). It is connected via a single cable, eliminating the need to run multiple wires to a dashboard. Its new Bluetooth functionality allows for quick connection and setup via the VictronConnect app.
Outsmart any energy challenge
The Cerbo GX MK2 serves multiple purposes infinite, perfectly extending control to the most diverse applications. For solutions including ggenerators, such as marine, or standby and off-grid solutions, it will automatically start/stop the generator or delay ignition until the end of "quiet" periods. It maintains 100% battery backup for energy storage systems, intervenes in power outages and diverts excess (solar) energy to self-consumption, saving users money . For motorhomes and emergency vehicles, it ensures the impeccable functioning of vital systems. But that's just to name a few...
Specifications:
- Remote Console: Yes
- Buzzer: Yes
- VE.Direct ports (always isolated): 3
- VE.Bus (always isolated): 2 RJ45 sockets grouped
- VE .Can: Yes, VE.Can 1 isolated and VE.Can 2 non-isolated
- USB: 3 USB Host ports
- Ethernet: RJ45 10/100 socket - isolated except shielding
- WiFi: Built-in
- Bluetooth Smart: yes
- Micro SD card slot: SDHC cards up to max. 32 GB (5)
- Second CAN bus port (BMS-Can): Yes - see VE.Can
- BMS-Can port: No
- Built -in RS485: No
- Programmable relay: 2 x NO/NC (8), DC up to 30VDC: 6A, DC up to 70VDC: 1A, AC: 6A, 125VAC
- Resistive Tank Level Inputs: 4
- Temperature Sensing Inputs: 4
- Digital Inputs: 4
Specifications performance:
- CPU: Dual-core
- RAM: 1 GB
- Max. VE.Direct devices: 15
Other specifications:
- Supply voltage: 8 - 70 VDC
- Power: 2.5 to 5 W
- Mounting: wall or DIN rail (35 mm)
- External dimensions (H x W x D): 478 x 154 x 48 mm
- Operating temperature: -20 to +50 degrees C
- Battery backup clock: Yes
- 5V output: No
Standards:
- Safety: IEC 62368-1
- EMC: EN 301489-1, EN301489-17
- Automotive: ECE R10-6
Save $48 on purchase. the Victron Cerbo GX MK2 for only $275 at NVN Marine! Free same day delivery before 3 p.m. Technical specifications Victron Cerbo GX MK2
| Type: | Electric | Accessories |
|---|---|
| Supplier: | Victron Energy |
| Type: | Chargers |
| User Guide: | Download PDF |
For detailed shipping terms, please see our shipping policy and you canfind our return and refund policy here.
- Victron Cerbo GX
- Victron Centaure Charger – 50 A 12/50(3) 120-240 V
- Victron Centaure Charger – 30 A 12/30(3) 120-240 V
- Victron Centaur charger - 24 VDC - 60AMP - 3 banks - 120-240 VAC
- Victron Centaur charger - 24 VDC - 40AMP - 3 banks - 120-240 VAC
- Victron Centaur charger - 24 VDC - 30AMP - 3 banks - 120-240 VAC
- Victron Centaur charger - 12 VDC - 80AMP - 3 banks - 120-240 VAC
