Victron Lynx distributor Electrical

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse and indicate its status with an LED on the front. Part of the Lynx Modular Distribution System.

Lynx Distributor

A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse and indicate its status with an LED on the front. Part of the Lynx Modular Distribution System.

Contains a positive and negative bus bar and provides connection for 4 individual DC equipment circuits, loads or DC groups. It has space for individual DC fuses per DC group. There is an optional feature of an LED for each fuse to indicate if the fuse is blown.

If you wish to use the fuse indication LEDs on the Lynx distributor, this also requires connection to a Lynx shunt. The Lynx Shunt contains the foodWide input voltage required (8 to 70 V DC) to provide the required 5 V power (4.5 V-5.5 V) of the Lynx.rd distributor circuit.

Jumper cables RJ11 are used to connect the Lynx Shunt to the distributor. This RJ11 cable is supplied with the Distributor in the box. There are two ports on the Lynx Shunt, and it is possible to use either one.

When everything is OK, only the central LED is green; When a fuse has blown (or is missing), the central fuse and fuse circuit LEDs will turn red. If you are not using all connection points in your DC distribution it may be necessary to install dummy fuses to turn off the red LEDs

Warranty Information

This product can expose you to chemicals known to the State of California as a carcinogen.s congenital or other reproductive problems. For more information,

Please contact your dealer for any returns, repairs, or support issues related to this product.

Lynx Power Input The Lynx power input module is used to connect the battery via an external fuse. This is useful if you have several parallel chains. Since the short circuit current potential of most battery packs is extremely high, it is recommended to use an external fuse system with appropriate fault current interrupt ratings (such as NH HRC ). Power In includes a negative and positive DC bus with M8 bolts to connect the battery cables. It can accommodate cables with a diameter of up to 22mm through the bottom entry guide, and there are no restrictions by connecting from both sides.
PRODUCT ID: 82843
SKU: NVN-82843
CSKU: CWR-82843
REWRITE: 93954-victron-lynx-distributor
MPN: LYN060102000
UPC: 8719076022633
ASIN: B07FML8JHG
WSKU:
SSKU:
KSKU:
GSKU: LYN060102000
MSKU:
LSKU:
NAME: Victron Lynx Distributor
NAME_EX: VICTRON LYNX DISTRIBUTOR
TITLE: Victron Lynx Distributor
TYPE: Electric | Fuse Blocks & Fuses
SELLER: Victron Energy
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Automotive Parts & Accessories
Victron Lynx DC- Distributor 1000A
Victron Energy Lynx Power-In
Automotive Parts & Accessories
Gtags:

GSpecs:

Victron Lynx Distributor Product Description A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse and indicate its status with an LED on the front. Part of the Lynx Modular Distribution System.

Lynx Distributor

A modular DC bus bar, with locations for four fuses CC. It will monitor the status of each fuse and indicate its status with an LED on the front. Part of the Lynx Modular Distribution System.

If you wish to use the fuse indication LEDs on the Lynx distributor, this also requiresmake a connection to a Lynx shunt. The Lynx Shunt contains the necessary wide input power supply (8 to 70 V DC) to produce the required 5 V (4.5 V-5.5 V) power required from the Lynx distributor circuit board.

RJ11 jumper cables are used to connect the Lynx Shunt to the distributor. This RJ11 cable is supplied with the Distributor in the box. There are two ports on the Lynx Shunt, and it is possible to use either one.

When everything is OK, only the central LED is green; When a fuse has blown (or is missing), the central fuse and fuse circuit LEDs will turn red. If you are not using all connection points of your DC distribution, it may be necessary to install dummy fuses to turn off the red LEDs.

Warranty Information

This product can expose you to chemicals known to the State of California to cause cancer, birth defects, etc.ongenital or other reproductive problems. For more information,

Please contact your dealer for any returns, repairs, or support issues related to this product.

Lynx Power Input The Lynx Power Input Module is used to connect the battery via an internal exfusible. This is useful if you have several parallel chains. Since the short circuit current potential of most battery packs is extremely high, it is recommended to use an external fuse system with appropriate fault current interrupt ratings (such as NH HRC ). Power In includes a negative and positive DC bus with M8 bolts to connect the battery cables. It can accommodate cables with a diameter of up to 22mm through the bottom entry guide, and there are no restrictions by connecting from both sides.

Products associated with Victron Lynx distributorsVictron battery monitor - BMV-702 - Black
Victron intelligent battery monitor - BMV-712 - Gray - Bluetooth compatible
Victron battery monitor - BMV -702 - Gray
Victron modular fuse holder for MEGA fuse
Victron bus bar for connecting 6 modular holders
Victron MEGA fuse - 200 A - 32 V (pack of 5 pieces)
Victron MEGA fuse - 250 A - 32 V (pack of 5 pieces)
Victron MEGA fuse - 400 A - 32 V (pack of 5 pieces)
Victron Holder MEGA fuse
Fuse Victron MEGA 300AMP - 32V (Pack of 5 pieces)

Frequently asked questions (FAQ) About the Victron Lynx distributor Who is the Victron Energy?
How to describe the Victron distributor Lynx?
What is the type of product?
What are the manufacturer's notes on the Victron Lynx dispenser?
Who is the Victron Energy? ? Victron Energy is a mondiale renowned for its technical innovation, reliability and construction quality. Victron products, which excel at efficiently combining two or more distinct energy sources, are recognized internationally as the professional choice for resilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and more. How to describe the Victron Lynx distributor? A modular DC bus bar, with locations for four DC fuses. It will monitor the status of each fuse, and indicates its status using an LED on the front. Part of the Lynx Modular Distribution System.What is the product type? Terminals

A modular DC busbar, withlocations for four DC fuses. It will monitor the status of each fuse and indicate its status with an LED on the front. Part of the Lynx Modular Dispensing System.

$35

Victron Lynx Dispenser

$201

Type:	Electric \| Fuse Blocks and Fuses
Supplier:	Victron Energy
Weight:	5.5 lbs
Type:	Lugs

Shipping Weight :	5.5 lbs
Box sizes:	4.00 (h) x 7.00 (w) x 16.00 (w)
Cubic feet:	448.0
P65:	Yes